• 자원리싸이클링
• /
• 제16권2호
• /
• pp.48-55
• /
• 2007

석탄화력발전소에서 부산물로 발생하는 비산재를 이용하여 저밀도 폴리에틸렌 열분해용 저가 크래킹 촉매를 합성하였다. 석탄비산재에 포함되어 있는 실리카와 알루미나를 NaOH와의 융합을 통해 용출시키고 이를 공침시킴으로써 비정질 실리카알루미나 촉매로 합성하였다. NaOH/석탄비산재 중량비와 활성화 시간 등의 합성조건이 촉매 합성에 미치는 영향을 살펴보기 위하여 열중량분석기를 사용하여 저밀도 폴리에틸렌 촉매 열분해를 수행하였다. 열분해 온도 변화와 열분해 생성물의 비점분포를 분석하여 합성 촉매의 성능을 평가하였으며 합성된 촉매의 물리적 특성과 촉매 활성간의 관계를 고찰하였다. NaOH/석탄비산재의 중량비가 1.2이고 활성화 시간이 8시간일 때 합성된 촉매가 가장 우수한 성능을 나타내었다. 최적 조건에서 합성된 촉매는 상용촉매와 유사한 활성을 나타내어 우수한 효과를 나타내었으며 폐플라스틱 재활용에 효과적으로 사용할 수 있으리라 예측된다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 추계학술대회 논문집
• /
• pp.81-86
• /
• 2003

This paper deals with the performance analysis and design of impulse turbine for OWC type wave energy plant. Numerical analysis was performed using a commercially-available software FLUENT. This parametric study includes the variation of several important parameters such as the number and shape of blades, hub ratio and tip clearance. Since parametric study at various flow coefficients requires considerable amount of computing tim, two-dimensional analysis was employed to find out optimum principal particulars in rather simple manner. Full three-dimensional calculation was also performed for several test cases to confirm the validity of two-dimensional approach. Up to the present stage, tentative result is well demonstrating the usefulness of 2-D analysis.

• Journal of Electrical Engineering and Technology
• /
• 제12권6호
• /
• pp.2237-2246
• /
• 2017

A nonisolated two-phase bidirectional dc-dc converter (NTPBDC) is a very attractive solution for the battery energy storage system (BESS) applications due to the high voltage conversion ratio and the reduced conduction loss of the switching devices. However, a hard-switching based NTPBDC decreases the overall voltage conversion efficiency. To overcome this problem, this paper proposes a novel NTPBDC with zero-voltage-transition (NTPBDC -ZVT). The soft-switching for the boost and buck main switches is achieved by using a resonant cell, which consists of a single resonant inductor and four auxiliary switches. Furthermore, due to the single resonant inductor, the proposed NTPBDC-ZVT has the advantages of simple implementation, reduced size, and low cost. The validity of the proposed NTPBDC-ZVT is verified through experimental results.

• 대한산업공학회지
• /
• 제41권1호
• /
• pp.97-104
• /
• 2015

An electric-motor which uses electric energy to dry laundry in a dryer generates wind by rotating a fan. The roles of electric motor and fan are crucial for drying. To reduce the noises or vibration, their performances should be improved. However, it requires a relatively high cost to redesign them. In this case, redesigning the fan case rather than the motor or the fan would be easier and cheaper. This paper is to apply Taguchi dynamic characteristic concept with the ideal function of energy conversion to redesign the fan case. Not only the increase of the wind power but also the decrease of noise, vibration and the other side effects are resulted.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권1호
• /
• pp.27-33
• /
• 2005

The development of modern high-energy magnet materials has allowed the replacement of field coils in many different types of electromagnetic energy conversion machines. As well, the linear synchronous motor has recently been proposed for linear motion with high efficiency and thrust. Thus, this paper presents an analytical solution for the high thrust and cost reduction of the Iron-Cored Permanent Magnet Linear Synchronous Motor (PMLSM) considering magnetization arrays and geometry. Hence, the superior utilization points in each of the magnetization arrays are provided by the height ratio of the magnet/air-gap and magnet/winding coil, etc. In formulation, the space harmonic method in analytical solutions and the generalized 2-D tensor finite element analysis can be used to evaluate force components in magneto static devices including the magnetostrictive phenomenon.

• 한국해양공학회지
• /
• 제18권5호
• /
• pp.1-6
• /
• 2004

This paper deals with the performance analysis and design of impulse turbine for owe type wave energy plant. Numerical analysis is performed using a commercial software FLUENT. This parametric study includes the variation of several important parameters, such as the number and shape of blades, hub ratio, and tip clearance. Since parametric study at various flow coefficients requires a considerable amount of computing time, two-dimensional analysis is employed to find out optimum principal particulars. Full three-dimensional calculations are also performed for several test cases, in order to confirm the validity of the two-dimensional approach. Up to the present stage, tentative results are demonstrated the usefulness of 2-D analysis.

• 한국수소및신에너지학회논문집
• /
• 제13권3호
• /
• pp.249-258
• /
• 2002

Thermochemical water-splitting IS(Iodine-Sulfur) process has been investigating for large-scale hydrogen production. For the construction of an efficient process scheme, two kinds of membrane technologies are under investigating to improve the hydrogen producing HI decomposition step. One is a concentration of HI in quasi-azeotropic HIx ($HI-H_2O-I_2$) solution by elecro-electrodialysis. It was confirmed that HI concentrated from the $HI-H_2O-I_2$ solution with a molar ratio of 1:5:1 at $80^{\circ}C$. The other is a membrane reactor to enhance the one-pass conversion of thermal decomposition reaction of gaseous hydrogen iodide (HI). It was found from the simulation study that the conversion of over 0.9 would be attainable using the membrane reactor using the gas permeation properties of the prepared silica hydrogen permselective membrane by chemical vapor deposition (CVD). Design criterion of the membrane reactor was also discussed.

• Asian-Australasian Journal of Animal Sciences
• /
• 제24권10호
• /
• pp.1447-1455
• /
• 2011

Sixty four, 30-week-old, Lohmann Brown-Lite laying hens were randomly allocated to one of four treatments with eight replicates per treatment and two hens per replicate for a 10 week study. The control diet was a high energy (11.81 MJ/kg) diet and the moderate energy (11.39 MJ/kg) diets were formulated dropping the level of animal fat. The three moderate energy diets were fed either unsupplemented (0.0%) or supplemented with 0.05 or 0.10% glycine. There were no significant differences (p>0.05) in hen-day egg production, egg weight, feed intake or feed conversion between birds fed the unsupplemented moderate energy and high energy diets. Significant differences were detected concerning egg components and quality measurements as assessed by albumen percentage (p = 0.02), yolk weight (p = 0.02), yolk percentage (p<0.01), yolk to albumen ratio (p<0.01) and yolk color (p = 0.01) between birds fed the unsupplemented moderate and high energy diets. Glycine supplementation of the moderate energy diet linearly increased (p<0.01) egg weight and feed intake with no significant (p>0.05) effects on egg production or feed conversion. Glycine supplementation significantly increased egg content (p<0.01), albumen weight (p<0.01) and percentage (p<0.01) as well as yolk weight (p<0.01) while yolk percentage (p = 0.04), yolk to albumen ratio (p = 0.01) and egg shell percentage (p<0.01) were linearly decreased. Supplementation with glycine produced a tendency (p = 0.09) towards an increase in the percentage of large eggs (63-72.9 g) produced with a concomitant decrease in the percentage of small (below 53 g) eggs (p = 0.09). The overall results of this study indicate that glycine supplementation of laying hen rations has the potential to increase egg production and weight. These increases appeared to be mediated through increases in feed intake and the ileal digestibility of fat and energy.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.224-227
• /
• 2004

The goal of this paper is optimal switching angle of switched reluctance motor drive system for maximum energy ratio. A new magnetizing method with a low-frequency increasing the energy conversion ratio that is related to the efficiency of motor is proposed. As results, it improved the efficiency about $2[\%]$. And a torque ripple is also sufficiently reduced compared with that of the conventional switching angle magnetizing approach. In order to start softly regardless of a large ripple torque, the profile of phase current is predicted by the ANFIS, and current control mode was adapted when it is operated under the starting speed. Variable implementations on the fields will guarantee the more practical drive system.

• 환경영향평가
• /
• 제23권1호
• /
• pp.11-17
• /
• 2014

Since the Renewable Portfolio Standard (RPS) would be started in 2012, the use of renewable energy should be 11% of total energy use including bio-fuel in 2030. The economic efficiency for renewable energy in B power plant was considered with the bio-diesel, wind power and solar power. The Net Present Value (NPV) and Benefit/Cost Ratio(BC) were used for the economic efficiency with the cost and benefit analysis. In case of bio-diesel, the cost resulted from the fuel conversion and the benefit would be created with trade and environmental improvement. With regard to wind power and solar power, the construction cost would be required and benefit factors would be same as the bio-diesel. The wind power was the best of economic efficiency of renewable energy as the results of NPV and BC ratio. Whereas, the market of wind power was very popular and the techniques of wind power has been developing rapidly.