• Membrane Journal
• /
• v.31 no.2
• /
• pp.133-144
• /
• 2021

Alkaline water electrolysis system is the oldest technology among various hydrogen production processes to produce green hydrogen with the least amount of greenhouse gas generated. Alkaline water electrolysis (AWE) system is used in alkaline atmosphere condition. In comparison to polymer electrolyte membrane water electrolysis (PEMWE), this system can utilize stable transition metals such as nickel, cobalt, and silver, as electrode catalysts. AWE is relatively inexpensive, and can easily be scaled up to large scale. The system is a mature technology, as it has been in operation since the beginning of the 20th century in MW-scale for hydrogen generation, and there are currently more than 20 commercial manufacturers. In this review, the basic principles of AWE, along with catalysts, electrodes, and diaphragm membranes, are summarized. Particularly, the research and development trends of the diaphragm membrane unit, which is the core component of an AWE, are discussed in detail.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.4
• /
• pp.423-434
• /
• 2016

The importance of severe nuclear accidents and probabilistic safety assessment (PSA) were brought to international attention with the occurrence of severe nuclear accidents caused by the extreme natural disaster at Fukushima Daiichi nuclear power plant in Japan. In Korea, studies on level 3 PSA had made little progress until recently. The code systems of level 3 PSA, MACCS2 (MELCORE Accident Consequence Code System 2, US), COSYMA (COde SYstem from MAria, EU) and OSCAAR (Off-Site Consequence Analysis code for Atmospheric Releases in reactor accidents, JAPAN), were reviewed in this study, and the disadvantages and limitations of MACCS2 were also analyzed. Experts from Korea and abroad pointed out that the limitations of MACCS2 include the following: MACCS2 cannot simulate multi-unit accidents/release from spent fuel pools, and its atmospheric dispersion is based on a simple Gaussian plume model. Some of these limitations have been improved in the updated versions of MACCS2. The absence of a marine and aquatic dispersion model and the limited simulating range of food-chain and economic models are also important aspects that need to be improved. This paper is expected to be utilized as basic research material for developing a Korean code system for assessing off-site consequences of severe nuclear accidents.

• The KIPS Transactions:PartC
• /
• v.13C no.7 s.110
• /
• pp.803-812
• /
• 2006

This paper analytically evaluates the FEC(Forward Error Correction) symbol size's effect on the performance and energy consumption of 802.11 protocol with the block FEC algorithm over WSN(Wireless Sensor Network). Since the basic recovery unit of block FEC algorithms is symbols not bits, the FEC symbol size affects the packet correction rate even with the same amount of FEC check bits over a given WSN channel. Precisely, when the same amount of FEC check bits are allocated, the small-size symbols are effective over channels with frequent short bursts of propagation errors while the large ones are good at remedying the long rare bursts. To estimate the effect of the FEC symbol site, the paper at first models the WSN channel with Gilbert model based on real packet traces collected over TIP50CM sensor nodes and measures the energy consumed for encoding and decoding the RS (Reed-Solomon) code with various symbol sizes. Based on the WSN channel model and each RS code's energy expenditure, it analytically calculates the transmission efficiency and power consumption of 802.11 equipped with RS code. The computational analysis combined with real experimental data shows that the RS symbol size makes a difference of up to 4.2% in the transmission efficiency and 35% in energy consumption even with the same amount of FEC check bits.

• Journal of Integrative Natural Science
• /
• v.16 no.1
• /
• pp.13-31
• /
• 2023

The sesarmid crab Muradium tetragonum, inhabiting the mangrove, are considered as a key consumer of litter and thereby play an important role in the detritus food chain and energy flow in the mangrove ecosystem. The present investigation was carried out with objectives to enlighten the reproductive system of Muradium tetragonum through histological and histochemical studies. Histological organization of the testis of M. tetragonum revealed that each testis has a lobular structure consisting of several testicular lobules arranged around the collecting duct. Histology of the deferens of M. tetragonum revealed it to be composed of three-layer of tissues along the entire length:the outer connective tissue, the middle muscular and the inner epithelial layer. Based on the histological architecture these three regions are recognized as proximal vas deferens (PVD), middle vas deferens (MVD) and distal vas deferens (DVD). Histological characteristics of the ovary of M. tetragonum during different phases of ovarian development were studied. Based on the colour changes of the ovary and diameter of the oocytes five stages of ovarian development can be pronounced. Histochemical analysis of the male reproductive tissues of M. tetragonum signifies the secretion of a different biomolecule by specifying their origin in the reproductive tissue and their possible transformation into spermatophores. In the female reproductive tissues, histochemical evaluation envisaged the secretory products during different stages of ovarian development The secretory substances of the spermatheca expound on the significance of its secretion in dehiscing the spermatophore wall and in nourishing as well as protecting the spermatozoa.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.4
• /
• pp.245-255
• /
• 2008

Korea Hydro and Nuclear Power Company(KHNP) conducted site investigations for a low and intermediate-level nuclear waste repository in the Gyeong Ju site. The site characterization work constitutes a description of the site, its regional setting and the current state of the geosphere and biosphere. The main objectives of hydogeological investigation aimed to understand the hydrogeological setting and conditions of the site, and to provide the input parameters for safety evaluation. The hydogeological characterization of the site was performed from the results of surface based investigations, i.e geological mapping and analysis, drilling works and hydraulic testing, and geophysical survey and interpretation. The hydro-structural model based on the hydrogeological characterization consists of one-Hydraulic Soil Domain, three-Hydraulic Rock Domains and five-Hydraulic Conductor Domains. The hydrogeological framework and the hydraulic values provided for each hydraulic unit over a relevant scale were used as the baseline for the conceptualization and interpretation of flow modeling. The current hydrogeological characteristics based on the surface based investigation include some uncertainties resulted from the basic assumption of investigation methods and field data. Therefore, the reassessment of hydrostructure model and hydraulic properties based on the field data obtained during the construction is necessitated for a final hydrogeological characterization.

• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.49-55
• /
• 2018

Under the era of energy crisis, hydrogen energy is considered as one of the most potential alternative energies. Liquid hydrogen has much higher energy density per unit volume than gas hydrogen and is counted as the excellent energy storage method. In this study, Navier-Stokes equations based on 2-phase model were solved by using a computational fluid dynamics program and the liquefaction process of gaseous hydrogen passing through a cryogenic cooling tube was analyzed. The copper with high thermal conductivity was assumed as the material for cryogenic cooling tube. For different inlet velocities of 5 m/s, 10 m/s and 20 m/s for hydrogen gas, the distributions of fluid temperature, axial and radial velocities, and volume fractions of gas and liquid hydrogens were compared. These research results are expected to be used as basic data for the future design and fabrication of cryogenic cooling tube to transform the hydrogen gas into liquid hydrogen.

• Journal of Korean Society of Forest Science
• /
• v.99 no.4
• /
• pp.597-602
• /
• 2010

The most basic matter to establish forest carbon circulation village is statistic on greenhouse gas emissions. But currently, although there is statistic on greenhouse gas emissions in the level of city or province, there is not statistic on greenhouse gas emission in village unit. According to the results, The model area is located in Seobyeok-ri, Chunyang-myeon, Bonghwa-gun, Gyeongsangbuk-do, the total $CO_2$emissions caused by energy used in the model area was $1,755tCO_2$. Heating accounts for 55% of total emissions followed by 23% for power and 22% for vehicles. The model area emitted $572tCO_2$ due to rice growing and livestock raising, accounting for approximately 24.5% of total $CO_2$ emissions. It is expected that a reduction of as much as $884tCO_2$ emissions will be made from the current $964tCO_2$ to a level of 1/12th that amount, or $80tCO_2$ by replacing heating energy currently used in the model area with wood bioenergy such as wood chips or pellets. In addition, carbon emission reduction is expected for both heating and power by replacing the power consumption in houses, buildings, and street lights with solar power.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_2
• /
• pp.1193-1202
• /
• 2018

It is important to quantitatively analyze the energy budget for understanding of long-term climate change in Arctic. High-quality and long-term radiative parameters are needed to understand the energy budget. Since most of radiative flux components based on satellite are provide for a short period, several data must be used together. It is important to acquaint differences between data to link for conjunction with several data. In this study, we investigated the comparative analysis of Arctic radiative flux product such as CERES and GEWEX to provide basic information for data linkage and analysis of changes in Arctic climate. As a result, GEWEX was underestimated the radiative variables, and it difference between the two data was about $3{\sim}25W/m^2$. In addition, the difference in high-latitude and sea ice regions have increased. In case of comparing with monthly means, the other variables except for longwave downward flux represent high difference of $9.26{\sim}26.71W/m^2$ in spring-summer season. The results of this study can be used standard data for blending and selecting GEWEX and CERES radiative flux data due to recognition of characteristics according to ice-ocean area, season, and regions.

• Journal of Korean Society of Forest Science
• /
• v.98 no.6
• /
• pp.639-645
• /
• 2009

The objective of this research was to introduce the TPI approach for interpreting land-forms of mountain forests in South Korea. We develop an objective procedure to decide the scale factor as a basic analytical unit in land-form classification of rugged mountain areas using TPI. In order to determine the scale factor associated with the pattern of slope profiles, the gradient variance curve was derived from a revised hypsometric curve developed using the relief energy of topographic profiles. Using the gradient variance curve, found was the grid size with which the change in relief energy got the peak point. The grid size at the peak point was determined as the scale factor for the study area. In order to investigate the performance of the procedure based on the gradient variance curve, it was applied to determination of the site-specific scale factors of 3 different terrain conditions; highly-rugged, moderately-rugged and relatively less-rugged. The TPI associated with the corresponding scale factors by study site was, then, determined and used in classifying the land-forms. According to the results of this study, the scale factor gets shorter with more rugged terrain conditions. It was also found that the numbers of valleys and ridges estimated with TPI show almost the same trends as those of the observed and the scale factors tends to approach to the mean distance of ridges.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.2
• /
• pp.15-26
• /
• 2017

This study was conducted to investigate and analyze the discharge characteristics of recyclable material from S-city, S-district, in order to improve the sorting efficiency in recycling sorting facility. The characteristics of recyclable materials collected were analyzed in three different scopes; source origin, collection and transportation, and sorting steps. The average of recyclable waste generation is $0.121kg/day^*man$. Regional collection period appears to be three times a week, and the density of mixed recyclable wastes showed the average of $202.4kg/m^3$ in the waste collection vehicle. In the analysis into the sorting steps, the average of carrying amount of mixed recycling products is 1,154.6 ton/month, the average of appeared density is $181kg/m^3$, the average amount of separated recycling products is 448.5kg/month, and the density of recycling residue is found out to be $48kg/m^3$. The sorting rate of recyclable material is 38.85% and the percentage of residues is 55.90%. Out of 7,744.8 tons of the total recyclable residues, 4,272.1 tons were found out to be possible recylable materials. As a result of increasing the recycling rate of residues, the encouragement of base-recycling, the automation and retrofit of sorting equipment, and energy recovery from recycling residue were discussed.