• 설비공학논문집
• /
• 제17권3호
• /
• pp.277-284
• /
• 2005

The purpose of this study is to analyze the effect of sunshine on the heating energy consumption of apartment houses by a field investigation in Haeundae, Busan. In the field, heating energy consumption of every household is researched by reading a calorimeter and the duration of sunshine of every household is calculated by Sunlight V1.0. Then, the duration of sunshine and heating energy are done regression analysis by SPSS 10. According to this study the apartment houses by orientation spend more energies order of east, west, southeast, southwest, and south. When apartment houses are same orientation, there is difference of $29{\sim}58\%$ in heating energy consumption by the duration of sunshine. And the heating energy consumption in worst condition of sunshine increases $67\%$ on the best condition of sunshine.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.119-124
• /
• 2005

Decision of operation performance mode to minimize the energy consumption of urban rail vehicle. This paper analyses how much acceleration and deceleration of urban rail vehicle should be applied andhow to choose an operation mode to minimize energy consumption when train runs between station within the fixed operation time. The decided operation pattern satisfying the minimum energy consumption becomes a target trajectory and a basis for the controller design criteria. To make this goal it grasps the characteristics of urban rail vehicle, realize operation energy model of urban rail vehicle and verify the accuracy of embodied model the Matlab simulation with the same operation result of real route. It searches for operation pattern to minimize operation energy by changing the acceleration and deceleration on the imaginative route and proposes operation pattern minimizing energy consumption by applying real operation data between Dolgogee-Sukgye section of Seoul Metropolitan Subway Line 6.

• 드라이브 ㆍ 컨트롤
• /
• 제17권2호
• /
• pp.38-44
• /
• 2020

Various efforts have been initiated to reduce the energy consumption of the compressor as it is one of the approaches to saving a large portion of the fixed cost of the production site. Various results of reducing the energy consumption of the compressor have been reported, but to reduce the energy consumption of the compressors fundamentally, regular management of the compressor should ensure optimum operation. This requires periodic on-site visits by experts, but is often overlooked as a cost issue, resulting in the use of the compressor in low-efficiency conditions. Thus, it is necessary to develop a low-cost evaluation technology for compressor condition monitoring and efficiency analysis to ensure that the compressor is always driven at the optimum efficiency without imposing undue burden on the compressor user. In this study, a sensor was installed at the inlet, outlet, and power supply of the compressor, and a method for evaluating the energy consumption of the compressor using the minimum sensor was derived. The experimental results are presented to show the validity of the proposed method. It was confirmed that the energy consumption of the compressor can be easily as well as efficiently evaluated by using the method developed in this study.

• 한국지열·수열에너지학회논문집
• /
• 제13권4호
• /
• pp.8-13
• /
• 2017

The effects of operational conditions of cooling water system on energy consumption for central cooling system are researched by using TRNSYS program. Cooling tower water pump flow rate, cooling tower fan flow rate, and condenser water temperature with various dry-bulb and wet-bulb temperatures are varied and their effects on total and component power consumption are studied. If the fan maximum flow rates of cooling tower is decreased, cooling tower fan and total power consumptions are increased. If the cooling tower water pump maximum flow rates is decreased, chiller and total power consumptions are increased. If condenser water set-point temperature is increased, chiller power consumption is increased and cooling tower fan power consumption is decreased, respectively.

• 한국재료학회지
• /
• 제17권10호
• /
• pp.532-537
• /
• 2007

A series of wet grinding experiments have been carried out using a stirred ball mill to systematically investigate consideration of grinding characteristics. The particle size distribution and median diameter of the grinding consumption power for a given grinding time were considered. Also, the effect of grinding aids on particle size and grinding consumption energy defined as the summation of grinding power was investigated. The grinding aids had influence on the smaller products size and decrease grinding consumption energy because the function of grinding aids were to be attribute to the prevention of agglomeration and ball and grinding chamber wall coating of sample powder. The grinding process seemed to be controlled by the force of agglomeration of the ground products. It was demonstrated that the particle size and grinding consumption energy could be more decreased by the addition of grinding aids.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.857-862
• /
• 2008

Window is the most demanding design component in the building design. Recently, window area in the building surface has been increased significantly in the office building. As window area increased significantly, however, the thermal load has been increased significantly due to lack of thermal performance of the outside wall. In this paper, we discussed the energy consumption of the buildings according to window area ratio. Two types of building for energy consumption analysis were made by Designbuilder v.1.4 and Energyplus v.2.0. Window area ratio was five different types ($30%{\sim}70%$) in each building. As a result, the cooling energy consumption has been decreased as window area decreased in each building. Whereas the heating energy consumption has been increased window area decreased.

• 한국지열·수열에너지학회논문집
• /
• 제10권2호
• /
• pp.7-12
• /
• 2014

Government has recently restricted heating and cooling set temperatures for the commercial and public buildings due to increasing national energy consumption. The goal of this paper is to visualize a future two way indoor set temperature control impact on building energy consumption by using TRNSYS simulation modeling. The building was modelled based on the twin test cell with the same dimension. Air source ground coupled heat pump performance data has been used for modeling by TRNSYS 17. Daejeon weather data has been used from Korea Solar Energy Society. The heating set temperature in the reference room is $24^{\circ}C$ as well as the target room set temperature are $23^{\circ}C$, $22^{\circ}C$, $21^{\circ}C$ and $20^{\circ}C$. The cooling set temperature of the reference room is also $24^{\circ}C$ as well as the target room set temperature of $25^{\circ}C$, $26^{\circ}C$, $27^{\circ}C$ and $28^{\circ}C$. For the air source heat pump system, heating season energy consumption is $35.52kWh/m^2y$ in the reference room. But the heating energy consumption in the target room is reduced to 7.5% whenever the set temperature decreased every $1^{\circ}C$. The cooling energy consumption in the reference room is $4.57kWh/m^2y$. On the other hand, the energy consumption in the target room is reduced to 22% whenever the set temperature increased every $1^{\circ}C$ by two way controller. For the geothermal heat pump system, heating energy consumption in the reference room is reduced to 20.7%. The target room heating energy consumption is reduced to 32.6% when the set temperature is $22^{\circ}C$. The energy consumption in the target room is reduced to 59.5% when the set temperature is $26^{\circ}C$.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권2호
• /
• pp.514-537
• /
• 2020

Wireless sensor network (WSN) is a distributed network composed of many sensory nodes. It is precisely due to the clustering unevenness and cluster head election randomness that the energy consumption of WSN is excessive. Therefore, a many-objective optimization WSN energy balance model is proposed for the first time in the clustering stage of LEACH protocol. The four objective is considered that the cluster distance, the sink node distance, the overall energy consumption of the network and the network energy consumption balance to select the cluster head, which to better balance the energy consumption of the WSN network and extend the network lifetime. A many-objective optimization algorithm to optimize the model (LEACH-ABF) is designed, which combines adaptive balanced function strategy with penalty-based boundary selection intersection strategy to optimize the clustering method of LEACH. The experimental results show that LEACH-ABF can balance network energy consumption effectively and extend the network lifetime when compared with other algorithms.

• 약학회지
• /
• 제57권2호
• /
• pp.110-118
• /
• 2013

High-caffeine energy drink consumption has been increasing in young adults, frequently causing the most common symptoms such as tremor, insomnia, anxiety, and nervousness and rarely leading to serious adverse effects like seizure, acute mania, and stroke due to caffeine overdose. There have been little current studies regarding analysis of high-caffeine energy drink consumption and its adverse effects in Korea. This study was to examine high-caffeine consumption patterns, associated factors, and adverse effects based on responses from 231 college students in a University through survey. About 88.3% (n=204) of total respondents reported that they had energy drinks. College students mostly consumed energy drinks to keep awake (46%) when studying and to recover fatigue (27%). Approximately 44% respondents mainly reported palpitation (73.9%) and insomnia (72.8%) regarding adverse effect questionnaire. Current reports on the risk of recreational use, co-ingestion of alcohol and energy drink as well as energy drink consumption among children and adolescents are increasing, requiring further long-term research and awareness of these issues.

• 지식경영연구
• /
• 제9권4호
• /
• pp.51-63
• /
• 2008

Effective energy consumption now becomes one of the area of knowledge management which potentially gives global impact. It is considerable for the energy management to optimize the usage of energy, rather than decreasing energy consumption at any cases. To resolve these challenges, an intelligent and personalized system which helps the individuals control their own behaviors in an optimal and timely manner is needed. So far, however, since the legacy energy management systems are nation-wide or organizational, individual-level energy management is nearly impossible. Moreover, most estimating methods of energy consumption are based on forecasting techniques which tend to risky or analysis models which may not be provided in a timely manner. Hence, the purpose of this paper is to propose a novel individual-level energy management system which aims to realize timely and personalized energy management based on context-aware computing approach. To do so, an index model for energy consumption is proposed with a corresponding service framework.