• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1046-1052
• /
• 2017

The load on the power grid of South Korea is expected to grow continuously until the late 2020s, and it is necessary to increase the transfer capacity from the Eastern grid to the Seoul-Gyeonggi region by reinforcing the transmission network for the electric power system to remain stable. To this end, the grid reinforcement by two bipole LCC HVDC transmission systems have been considered on account of the public acceptability and high growth of the fault current level, even though an additional 765kV system construction is more economical. Since the probability of the existing 765kV double circuit transmission line trip is extremely low, a dynamic simulation study was carried out to estimate the efficient HVDC capacity able to stabilize the transient stability by utilizing the HVDC overload capability. This paper suggests the application plan to reduce the HVDC construction capacity with ensuring the transient stability during the 765kV line trip.

• Wind and Structures
• /
• 제28권6호
• /
• pp.381-388
• /
• 2019

This paper described the application of Geospatial Analysis in determining mean wind speed, $V_h$ for wind load calculation imposed to electrical transmission tower structural design. The basic wind speed data on available station obtained from Malaysian Meteorology Department is adjusted by considering terrain and ground roughness factor. The correlation between basic wind speed, terrain factor and ground roughness stated in EN-50341-1 is used to obtain the $V_h$ for overhead transmission line elements 50 m above ground. Terrain factor, $k_r$ and ground roughness, $z_0$ in this study are presented by land use types of study area. Wind load is then calculated by using equation stated in design code EN-50341-1 by using the adjusted mean wind speed. Scatter plots of $V_h$ for different $k_r$and $z_0$ are presented in this paper to see the effect of these parameters to the value of $V_h$. Geospatial analysis is used to represent the model of $V_h$. This model can be used to determine possible area that will subject to wind load which severe to the stability of transmission tower and transmission line.

• 임산에너지
• /
• 제21권2호
• /
• pp.62-68
• /
• 2002

본 실험에서는 합판벽체내의 단열재 종류에 따른 단열성능을 비교 평가하였다. 열의 통과량을 비교해 보기 위하여 열관류 실험을 하였다. 열관류 실험결과 스티로폼과 유리섬유의 열관류율이 적게 나타났다. 용적비열은 황토보드와 집성목이 높은 결과를 나타내었다. 합판 벽체로 제작된 모형 주택을 이용한 실내외 온도변화를 비교해 본 결과 단열재료로스티로폼과 유리섬유를 사용한 벽체의 경우 외부 온도에 쉽게 영향을 받는 것을 알 수 있었으며 용적비열이 높은 황토보드, 황토ㆍ톱밥 혼합재, 집성목을 사용한 벽체의 경우는 외부온도의 변화에 비해 적은 온도변화를 보였다. 실험결과 열관류율은 스티로폼과 유리섬유가 작았지만 용적비열이 높은 황토보드와 황토ㆍ톱밥 혼합재, 집성목이 단열성능면에서 우수함을나타내었다.

• 에너지공학
• /
• 제11권4호
• /
• pp.291-298
• /
• 2002

본 연구에서는 전력산업 구조개편 환경에서 최적조류계산에 의한 전력조류 및 한계계수를 해석할 수 있는 실용적인 방법론을 제시한다. 먼저, 유용한 한계계수의 산정을 위해 전압제약, 선로과부하 제약, 발전 출력 제약 등의 각종 계통제약이 고려된 연료비 및 송전손실 최소화의 비선형 최적화 문제가 정식화되고 비선형 주·쌍대 내점법에 의한 해법이 제시된다. 또한, 최적조류계산에 의해 계산된 감도에 기초하여 한계가격 및 한계송전손실의 산정방법이 제시된다. 특히, 경쟁적 전력시장에서 송전손실에 관한 가격을 반영하기 위해 한계손실계수의 해석법이 제안된다. 본 연구의 결과를 IEEE RTS 24모선에 적용하여 전력시장가격의 해석에 대한 그 유용성을 검증하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제4권3호
• /
• pp.224-242
• /
• 2010

Data routing in wireless sensor networks must be energy-efficient because tiny sensor nodes have limited power. A cluster-based hierarchical routing is known to be more efficient than a flat routing because only cluster-heads communicate with a sink node. Existing hierarchical routings, however, assume unrealistically large radio transmission ranges for sensor nodes so they cannot be employed in real environments. In this paper, by considering the practical transmission ranges of the sensor nodes, we propose a clustering and routing method for hierarchical sensor networks: First, we provide the optimal ratio of cluster-heads for the clustering. Second, we propose a d-hop clustering scheme. It expands the range of clusters to d-hops calculated by the ratio of cluster-heads. Third, we present an intra-cluster routing in which sensor nodes reach their cluster-heads within d-hops. Finally, an inter-clustering routing is presented to route data from cluster-heads to a sink node using multiple hops because cluster-heads cannot communicate with a sink node directly. The efficiency of the proposed clustering and routing method is validated through extensive simulations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.738-743
• /
• 1991

A multiobjective analysis technique was applied for the optimum operation of pumps and reservoirs in service water transmission systems. Three major objectives were identified and assessed on the normally operating service water transmission systems. They are, 1) stability of pump operation; 2) economic point of view in minimizing the energy cost for pumping; 3) reliability in meeting the stochasticaly varying demands. The measures of these objectives were required times of pump on-offs in stability, required total energy cost in economics, and minimum required storage during the operating horizon in reliability. In order to find the best meeting solution to the decision maker, a set of non-dominated solutions which show the tradeoff relationships between the considering objectives were generated. The DM selects the best solution from this explicit tradeoff relationships using his heuristic decision rules or experience. The theory was verified by applying to the Kumi Service Water System. A combined technique of the ${\varepsilon}-constraint$ and the weighting methods was used to generate the nondominated solutions, and the dynamic programming algorithm was applied to find the optimal solution for the discretized multi-objective analysis problems.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1804-1814
• /
• 2015

In order to explore the characteristics of electrons in DC negative corona discharge, an improved plasma chemical model is presented for the simulation of bar-plate DC corona discharge in dry air. The model is based on plasma hydrodynamics and chemical models in which 12 species are considered. In addition, the photoionization and secondary electron emission effect are also incorporated within the model as well. Based on this model, electron mean energy distribution (EMED), electron density distribution (EDD), generation and dissipation rates of electron at 6 typical time points during a pulse are discussed emphatically. The obtained results show that, the maximum of electron mean energy (EME) appears in field ionization layer which moves towards the anode as time progresses, and its value decreases gradually. Within a pulse process, the electron density (ED) in cathode sheath almost keeps 0, and the maximum of ED appears in the outer layer of the cathode sheath. Among all reactions, R1 and R2 are regarded as the main process of electron proliferation, and R₂₂ plays a dominant role in the dissipation process of electron. The obtained results will provide valuable insights to the physical mechanism of negative corona discharge in air.

• 한국진공학회지
• /
• 제17권3호
• /
• pp.240-246
• /
• 2008

수십에서 수백 ${\mu}m$ 영역의 필름 두께 측정에 적용하기 위한 Ag-target 투과양극형 x-ray tube를 개발하고 특성을 조사하였다. 10kV 부근의 관전압에서 x-ray 에너지의 분포 및 선량특성을 조사하고 W-target tube와 비교하여 논의하였다. 또한 Ag-target tube와 W-target tube를 이용하여 Ny film과 PP film의 두께변화에 따른 x-ray의 투과 특성으로 조사하였고, 그 결과 개발된 x-ray tube는 필름두께 측정용으로 적용할 수 있을 만큼 충분히 좋은 특성을 나타내었다.

• Journal of Communications and Networks
• /
• 제16권2호
• /
• pp.121-129
• /
• 2014

The trend of an increasing demand for a high-quality user experience, coupled with a shortage of radio resources, has necessitated more advanced wireless techniques to cooperatively achieve the required quality-of-experience enhancement. In this study, we investigate the critical problem of rate splitting in heterogeneous cellular networks, where concurrent transmission, for instance, the coordinated multipoint transmission and reception of LTE-A systems, shows promise for improvement of network-wide capacity and the user experience. Unlike most current studies, which only deal with spectral efficiency enhancement, we implement an optimal rate splitting strategy to improve both spectral efficiency and energy efficiency by exploring and exploiting cooperation diversity. First, we introduce the motivation for our proposed algorithm, and then employ the typical cooperative bargaining game to formulate the problem. Next, we derive the best response function by analyzing the dual problem of the defined primal problem. The existence and uniqueness of the proposed cooperative bargaining equilibrium are proved, and more importantly, a distributed algorithm is designed to approach the optimal unique solution under mild conditions. Finally, numerical results show a performance improvement for our proposed distributed cooperative rate splitting algorithm.

• Elastomers and Composites
• /
• 제48권2호
• /
• pp.167-171
• /
• 2013

자동차용 선도장 베이스코트 도료에서 사용되는 알루미늄의 입자 크기와 배향에 따른 내후성을 연구하였다. UV를 촉진하여 조사할 수 있는 QUV$^{(R)}$ (Q-LAB) 장비를 이용하여 UV 투과율의 차이에 의한 소재의 손상 정도를 관찰하였다. Conflake 형태의 입자 크기가 서로 다른 3종의 알루미늄 paste를 이용하여 자동차용 선도장 조건으로 베이스코트를 도장하고 투명 클리어를 도장하여 필름과 시편을 제조하였다. 작성된 필름을 UV 투과 장비로 측정한 결과 입자 크기가 작고 수평 배향인 EKART사의 #790을 사용 시 낮은 UV 투과율을 나타내었다. 실제 내후성 시편의 단면 조사에서도 #790, #770, #750 순으로 높은 광택 유지율을 나타내었다.