• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.8
• /
• pp.579-588
• /
• 2013

This paper proposes an effective watermarking approach for copyright protection of fire video images. The proposed watermarking approach efficiently utilizes the inherent characteristics of fire data with respect to color and texture by using a gray level co-occurrence matrix (GLCM) and fuzzy c-means (FCM) clustering. GLCM is used to generate a texture feature dataset by computing energy and homogeneity properties for each candidate fire image block. FCM is used to segment color of the fire image and to select fire texture blocks for embedding watermarks. Each selected block is then decomposed into a one-level wavelet structure with four subbands [LL, LH, HL, HH] using a discrete wavelet transform (DWT), and LH subband coefficients with a gain factor are selected for embedding watermark, where the visibility of the image does not affect. Experimental results show that the proposed watermarking approach achieves about 48 dB of high peak-signal-to-noise ratio (PSNR) and 1.6 to 2.0 of low M-singular value decomposition (M-SVD) values. In addition, the proposed approach outperforms conventional image watermarking approach in terms of normalized correlation (NC) values against several image processing attacks including noise addition, filtering, cropping, and JPEG compression.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.2
• /
• pp.63-70
• /
• 2012

Larix kaempferi and Betula costata seedlings were grown under an elevated temperature ($27^{\circ}C$) for four weeks to understand initial changes on physiological characteristics caused by temperature rising in connection with global warming. At the end of the treatment, growth performance, leaf pigment content, antioxidative enzyme activities and malondialdehyde (MDA) content were measured and analyzed. Relative growth rates of the height of two tree species grown under elevated temperature ($27^{\circ}C$) were lower than those of control ($24^{\circ}C$) and dry weights of leaves, stems and roots were also reduced at higher temperature. Particularly, the root growth reduction of two tree species increased markedly at $27^{\circ}C$ over the study period, which increased the ratio of shoot to root. Under higher temperature, leaf pigment contents decreased, whereas anti-oxidative enzyme activities such as ascorbate peroxidase (APX) and catalase (CAT) increased as compared with the control. But MDA content was not affected by elevated temperature. In conclusion, the elevated temperature leads to root growth reduction, restriction of nutrient uptake from soil and the reduction of leaf pigment contents, which can inhibit the aboveground growth. In addition, higher temperature might act as a stress factor that causes growth reduction through the increase of energy consumption during a growth period.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.36 no.2
• /
• pp.104-108
• /
• 2016

The objective of this study was to determine how feeding forage and concentrate separately (SF) or as a total mixed ration (TMR) affects enteric methane production of cattle. Six Holstein steers ($203{\pm}22.5kg$) were used in a $2{\times}3$ changeover design experiment. Experimental diets (TMR and SF) consisted of compound feed, timothy hay and soybean curd residue in a ratio of 40:48:12, respectively, and diets were fed at 10% of metabolic body weight, on an as-fed basis. There were no differences in dry matter intake and enteric methane production (g/d) between SF and TMR but the methane conversion rate (methane energy/GE intake) of TMR was significantly higher (p=0.05) than that of SF. The mean methane emission factor (kg/head/year) and conversion rate of the two treatments were 21.4 and 0.05, respectively. There was a strong relationship between metabolic body weight and enteric methane production (p<0.001). At the present time, further studies may be necessary in order to establish the effects of TMR and SF on enteric methane production.

• Journal of Korean Elementary Science Education
• /
• v.41 no.3
• /
• pp.553-568
• /
• 2022

This study investigated the level of academic passion for elementary school teachers' science pedagogical content knowledge (PCK) and examined the factors that influence the passion. To this end, 161 elementary school teachers in Seoul were selected, and academic passion tests were then administered to evaluate their academic passion for science subject matter knowledge and science pedagogical knowledge. Individual in-depth interviews were also conducted with some of the participating teachers. The results revealed that 'importance' and 'harmonious passion' for learning science subject matter knowledge and science pedagogical knowledge were found at a high level. However, 'time/energy investment' and 'obsessive passion' for learning the knowledge were slightly higher or lower than normal. The 'like' for learning science subject matter knowledge was relatively high, but the 'like' for learning science pedagogical knowledge was slightly higher than normal. The differences in academic passion for science subject matter knowledge and science pedagogical knowledge were greater according to advanced major at undergraduate than teaching career. The teachers evenly selected some factors that influenced their academic passion for science subject matter knowledge and science pedagogical knowledge. These identified characteristics included 'individual interest', 'high school track', 'experience in advanced major at undergraduate', 'experience in science-related graduate school', 'experience teaching science in elementary school', 'experience teaching science at the gifted education institute', 'experience in charge of science subject teacher', 'experience in science-related teacher training', 'experience in developing science-related teaching and learning materials', 'experience in charge of science or science-gifted related work', and 'experience in a science-related teacher community'. However, a slight difference was noted in the selection ratio depending on advanced major at undergraduate. Based on these results, the practical implications for improving their academic passion for science PCK are suggested.

• Animal Bioscience
• /
• v.37 no.2
• /
• pp.173-183
• /
• 2024

Objective: This study aimed to evaluate whether the methane (CH₄) to carbon dioxide (CO₂) ratio (CH₄/CO₂) and methane-related traits obtained by the sniffer method can be used as indicators for genetic selection of Holstein cows with lower CH₄ emissions. Methods: The sniffer method was used to simultaneously measure the concentrations of CH₄ and CO₂ during milking in each milking box of the automatic milking system to obtain CH₄/CO₂. Methane-related traits, which included CH₄ emissions, CH₄ per energy-corrected milk, methane conversion factor (MCF), and residual CH₄, were calculated. First, we investigated the impact of the model with and without body weight (BW) on the lactation stage and parity for predicting methane-related traits using a first on-farm dataset (Farm 1; 400 records for 74 Holstein cows). Second, we estimated the genetic parameters for CH₄/CO₂ and methane-related traits using a second on-farm dataset (Farm 2; 520 records for 182 Holstein cows). Third, we compared the repeatability and environmental effects on these traits in both farm datasets. Results: The data from Farm 1 revealed that MCF can be reliably evaluated during the lactation stage and parity, even when BW is excluded from the model. Farm 2 data revealed low heritability and moderate repeatability for CH₄/CO₂ (0.12 and 0.46, respectively) and MCF (0.13 and 0.38, respectively). In addition, the estimated genetic correlation of milk yield with CH₄/CO₂ was low (0.07) and that with MCF was moderate (-0.53). The on-farm data indicated that CH₄/CO₂ and MCF could be evaluated consistently during the lactation stage and parity with moderate repeatability on both farms. Conclusion: This study demonstrated the on-farm applicability of the sniffer method for selecting cows with low CH₄ emissions.

• Radiation Oncology Journal
• /
• v.9 no.1
• /
• pp.131-141
• /
• 1991

A comprehensive set of dosimetric measurements has been made on the Varian Clinac 1800 15 MV photon beam. Beam quality, percentage depth dose, dose in the build up region, output, symmetry and flatness, transmission through iead (Cerrobend), tray attenuation, isodose curves for the open and wedged fields were measured using 3 dimensional water phantom dosimetry system (including film densitometer system) and polystyrene phantoms. These dosimetric measurements sufficiently characterized the beam to permit clinical use. The depth dose characteristics of photon beam is $d_{max}$ of 3.0 cm and percentage depth dose of $76.8\%$ at 10 cm,100 cm source-surface distance, field size of $10\times10\;cm^2$ for 15 MV X-ray beam. The Output factors ranged 0.927 for $4\times4\;cm^2$ field to 1,087 for $35\times35\;cm^2$ field. The build-up level of maximum dose was at 3.0 cm and surface dose was approximately $15.5\%$ for a field size $10\times10\;cm^2$ The stability of output is $within\pm1\%$ and flatness and symmetry are $within\pm3\%$. The half value thickness (HVL) of lead is 13 mm, which corresponds to an attenuation coefficient of $0.053\;mm^{-1}$. These figures compare facorably with the manufacturesr`s specifications.

• Journal of the Korean Electrochemical Society
• /
• v.17 no.4
• /
• pp.222-228
• /
• 2014

Ni-rich system $Li[Ni_{1-x-y}Co_xMn_y]O_2$ of lithium secondary battery cathode material keep a high discharge capacity. However, by the Ni content increases, there is a problem that the electrochemical properties and stability of the structure are reduced. In order to solve these problems, research for positive ion doping is performed. The one of the cathode material, barium-doped $Li[Ni_{0.6-x}Ba_xCo_{0.1}Mn_{0.3}]O_2$ (x=0.01), was synthesized by the precursor, $Ni_{0.6}Co_{0.1}Mn_{0.3}(OH)_2$, from the co-precipitation method. The barium doped materials have studied the structural and electrochemical properties. The analysis of structural properties, results of X-ray diffraction analysis, and those results confirmed the change of the lattice from the binding energy in the structure by barium doping. Increased stability of the layered structure was observed by $I_{(006)}+I_{(102)}/I_{(101)}$(R-factor) ratio decrease. we expected that the electrochemical characteristics are improved. 23 mAh/g discharge capacity of barium-doped $Li[Ni_{0.6-x}Ba_xCo_{0.1}Mn_{0.3}]O_2$ (x=0.01) electrode is higher than discharge capacity of $Li[Ni_{0.6}Co_{0.1}Mn_{0.3}]O_2$ due to decrease overvoltage. And, through the structural stability was confirmed that improved the cycle characteristics. We caused a reduction in charge transfer resistance between the electrolyte and the electrode was confirmed that the C-rate characteristics are improved.

• Applied Chemistry for Engineering
• /
• v.22 no.1
• /
• pp.15-20
• /
• 2011

Poly[2,3-dimethyl-5,8-dithiophene-2-yl-quinoxaline-alt-9,9-dihexyl-9H-fluorene] (PFTQT) and poly[2,3-dimethyl-5,8-dithiophen-2-yl-quinoxaline-alt-10-hexyl-10H-phenothiazine (PPTTQT) based on 2,3-dimethyl-5,8-dithiophen-2-yl-quinoxaline weresynthesized by Suzuki coupling reaction. All polymers were soluble in common organic solvents such as chloroform, chlorobenzene, o-dichlorobenzene, tetrahydrofuran (THF) and toluene. The maximum absorption wavelength and band gap of PFTQT were 440 nm and 2.30 eV, and PPTTQT were 445 nm and 2.23 eV, respectively. The HOMO and LUMO energy level of PFTQT were -6.05 and -3.75 eV, and PPTTQT were -5,89 and -3.66 eV, respectively. The organic photovoltaic devices based on the blend of polymer and PCBM (1 : 2 by weight ratio) were fabricated. Efficiencies of devices were 0.24% (PFTQT) and 0.16% (PPTTQT), respectively. The short circuit current density ($J_{sc}$), fill factor (FF), and open circuit voltage ($V_{oc}$) of the device with PFTQT were $0.97mA/cm^2$, 29% and 0.86 V, and the device based on PPTTQT were $0.80mA/cm^2$, 28% and 0.71 V, 31% and 0.71 V, respectively, under air mass (AM) 1.5 G and 1 sun condition ($100mA/cm^2$).

• Journal of Practical Agriculture & Fisheries Research
• /
• v.4 no.1
• /
• pp.119-127
• /
• 2002

This study was conducted to develop the heat exchanger by utilizing the heat energy of underground water(15℃), which might be used for cooling and heating system of the agricultural facilities. We developed the heat exchanger, parallel type plat fin tube made of Aluminum(Al 6063), which was named Aloo-Heat(No. of The registration design : 0247164, by Korean Intellectual property Office). The fin of exchanger was design of the granulated surface for minimizing fouling factor and dew forms, and also placed parallel to the tube in order to minimized the resistance of flows. 1. Aloo-heat was designed to have 0.03m for inside diameter, 0.036m for outside diameter of tube, 0.0012m for thickness of fin and 0.032m for length of plat fin. 2. t was also designed to have 1.5248m²/m for outside area of heat transfer, 0.0942m²/m for inside area contacting hot liquid, and the ratio (Ra) was 16.1869. 3. Efficiency of the fin was 93 percentage when fin length was 0.032m, and the fin thickness satisfied equation $\frac{h{\rho}}{k}$< 0.2 when it was 0.0012m. 4. According to the performance test of Aloo-heat, as the temperature and rate increased, the heating value also increased, heating value was 504kJ/h·m and 6,048kJ/h·m when it was 60℃, 10 𝑙/min and 80℃, 40 𝑙/min respectively. 5. The test of heating value was confident, because correlation value(R²) was 0.9898 for the temperature and 0.9721 for flow rate of hot liquid, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.10
• /
• pp.999-1005
• /
• 2008

The main reaction for soil washing with using sodium hydroxide(NaOH) and hydrogen peroxide(H$_2$O$_2$) was desorption and flotation of petrochemical contaminant by means of oxygen bubble. We found the rate of decomposition by rate constant according to various temperature. For the purpose of optimizing the operation factor, we examined the effect of concentration of NaOH and H$_2$O$_2$, washing time, and soil:water ratio. The rate of decomposition for H$_2$O$_2$ in liquid phase is the first order reaction by its concentration. The rate constant of k$_1$ was 0.9439 $\times$ exp(-1376.82/RT) when concentration of NaOH was lower than 0.1 M, and the rate constant of k$_2$ was 17.3588 $\times$ exp(-2320.06/RT) when it was higher than NaOH of 0.1 M. It found that NaOH was facilitated at the beyond of specific concentration. We confirmed the optimum concentration of NaOH/H$_2$O$_2$ by means of rate constants during soil washing. Also, the optimum conditions during soil washing were washing time of 15 min, soil : water ratio of 1 : 3, and NaOH/H$_2$O$_2$ concentration of 0.25 M/0.1 M.