• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1556-1570
• /
• 2016

In the process of virtual inertia control (VIC), the frequency regulation capability of the directly-driven wind turbine with permanent-magnet synchronous generator (D-PMSG) on wind farm is related to its rotor kinetic energy and capacity margin. This paper proposes the method for assessing the D-PMSG frequency regulation capability and defining its coefficient according to the operating state of wind power generators. In addition, the calculating method of parameters in VIC is also discussed according to the principles of primary frequency regulation and inertia response of synchronous generators. Then, by introducing the capability coefficient into the proportion-differential virtual inertia control (PD-VIC) for power coordination, a coordinated virtual inertia control (C-VIC) strategy is developed, with the consideration of the difference in frequency regulation capability between wind power generators. The proposed control method can not only give full play to the frequency regulation capability of wind power generators, decrease the movements of the pitch angle control system but also bring some self-coordination capability to different wind power generators thus to avoid a secondary drop in system frequency. The simulations and experiments prove the proposed method to be effective and practicable.

• 조명전기설비학회논문지
• /
• 제29권4호
• /
• pp.18-29
• /
• 2015

The purposes of this research and development are as follows: first, to provide pleasant driving environments inside tunnels; second, to improve the current illumination environments lacking in diffusion luminance meters to meet tunnel lighting standards; and, third, to reduce the consumption of tunnel lighting energy accounting for approximately 65% of tunnel maintenance costs because of inadequate visual environments and tunnel operations. Further details are listed below. Firstly, an image luminance meter for tunnels that can implement the L20-method which is a tunnel luminance method that follows the international standards of CIE88, which was developed in order to improve and change the existing illumination-based tunnel lighting operation system to a luminance-based system. (The margin of error of below 5% according to the results of a test by an authorized agency and field test). Secondly, early illumination control is possible since the lighting control system that can be operated based on luminance enables interlocking control of the inside and outside of a tunnel using ethernet communication. Thirdly, guidelines for field application of the system are proposed. In addition, the luminance inducers of tunnels are found and the reflexibility of each facility that may reduce luminance of the boundaries is also proposed. Fourthly, as a result of a test bed, power consumption of luminance-based lighting operations decreased by 15.6% compared to illumination-based operations. Applying the feedback controls and maintenance factors of internal/external luminance meters, it reduced by 36.4%. Therefore, we became able to provide a luminance-based lighting operation system that complies with tunnel lighting design standards and provides a visual environment for drivers.

• Nuclear Engineering and Technology
• /
• 제37권5호
• /
• pp.479-490
• /
• 2005

The thermalhydraulic performance of a CANDU-6 reactor loaded with various CANFLEX fuel bundles is evaluated by the NUCIRC code, which is incorporated with recent models of pressure drop and critical heat flux (CHF) predictions based on high-pressure steam-water tests for the CANFLEX bundle as well as a 37-element bundle. The distributions of channel flow rate, channel exit quality, critical channel power (CCP), and critical power ratio (CPR) for the CANFLEX bundles (with natural or recycled uranium fuel) in the CANDU-6 reactor fuel channel are calculated by the code. The effects of axial and radial heat flux on CCP are evaluated by assuming that the recycled uranium fuel (CANFLEX-RU) has the same geometric data as the natural uranium fuel bundle (CANFLEX-NU), but a different power distribution due to different fuel composition and refueling scheme. In addition, the effects of pressure tube creep and bearing-pad height are examined by comparing various results of uncrept, and $3.3\%\;and\;5.1\%$ crept channels loaded with CANFLEX bundles with 1.4 mm or 1.7 mm high bearing-pads with those of the 37-element bundle. The distributions of the channel flow rate and CCP for the CANFLEX-NU or -RU bundle show a typical trend for a CANDU-6 reactor channel, and the CPRs are maintained above at least 1.444 (NU) or 1.455 (RU) in the uncrept channel. The enhanced CHF of the CANFLEX bundle (particularly with 1.7mm height bearing-pads) produces a higher thermal margin and considerably less sensitivity to CCP reduction due to the pressure tube creep than the 37-element bundle. The CCP enhancement due to the raised bearing-pads is estimated to be about $3\%\~5\%$ for the CANFLEX-NU and $2\%\~6\%$ for the CANFLEX-RU bundle, respectively.

• 한국항행학회논문지
• /
• 제20권4호
• /
• pp.292-297
• /
• 2016

항공안전 및 공역활용도를 높임과 동시에 항공기 소음, 조종사 관제사간의 교신, 연료소모 및 배기가스 등을 효과적으로 줄일수 있는 연속강하접근절차는 세계적으로 큰 기대를 모으며 확대 적용되고 있으며 한국에서도 많이 적용되어 환경적, 경제적 차원에서 많은 도움이 될 것으로 예상된다. 그러나 인천국제공항의 표준접근절차들을 면밀히 살펴본 결과 접근절차 중 일부절차의 최초접근지점에서의 고도제한이 다른 절차들에 비해 상대적으로 높아 조종사들이 연속강하접근절차의 목적에 역행하여 불필요한 항력장치를 사용하여야하는 경우가 종종 발생한다. 따라서 일부절차상의 문제점을 검토하여 연속강하접근절차의 취지에 맞도록 절차변경을 함으로써 안전하고 효율적이며 친환경적인 항공운항에 이바지하려한다.

• 조명전기설비학회논문지
• /
• 제24권2호
• /
• pp.16-26
• /
• 2010

본 논문에서 제안하는 전력계통계획 방법론은 계통계획이 신규 자원의 수익에 영향을 미칠 수 있다는 인식 하에 발전 및 송전 투자 결정에 관한 상호 작용을 반영하고, 이것으로 인하여 설비 투자자 및 전력계통계획자의 목적을 동시에 고려할 수 있게 된다. 이러한 관점에서 본 논문은 혼합정수계획 모형에 기초한 전력계통계획 전산모형 프로그램을 개발하고자 한다. 이 소프트웨어는 설비예비율, 발전원별 비율,순동예비력 양, 에너지 및 연료제약 조건, 송전선로 사고 및 손실, 파이 분기 등의 기술적 제약조건을 만족하면서 신규 발전설비, 송전선로, 변전소의 용량뿐만 아니라 건설 시기와 장소를 결정하도록 설계되어 있다. 최종적으로 간단한 Garver 계통을 통하여 본 논문에서 제안된 전산모형 프로그램의 정확성 및 효율성을 검증하고자 한다.

• 한국가스학회지
• /
• 제17권1호
• /
• pp.7-12
• /
• 2013

자동차 배기가스 규제가 강화됨에 따라 천연가스에 수소를 첨가하는 수소-천연가스 혼합연료(HCNG)를 기존의 압축천연가스(CNG) 엔진에 적용하려는 많은 연구들이 진행되고 있다. 그러나 수소의 높은 연소 속도로 인한 역화, 조기착화, 노킹(knocking) 등의 이상연소 발생 가능성은 엔진의 가열 또는 열효율 및 출력의 저하를 야기하는 문제점이 발생할 수 있다. 본 연구에서는 CNG 연료에 수소를 일정 부분 혼합한 HCNG 연료를 기존의 CNG 엔진에 적용하여 희박연소 한계 확장을 통해 연소 성능 개선을 확인하고, CNG와 HCNG 연료의 노킹 특성을 파악하고자 하였다. 공기과잉율의 변화에 따른 노킹 발생 조건을 관찰함으로써 HCNG 연료의 적용성 및 노킹마진을 평가하고자 하였다. HCNG 연료 사용 시 최적운전조건에서 노킹 문제없이 엔진을 운전할 수 있었으나 노킹이 일어날 수 있는 가능성이 높아져 이에 대한 대비가 필요할 것으로 판단된다.

• Journal of Electrical Engineering and Technology
• /
• 제11권1호
• /
• pp.86-92
• /
• 2016

Upon detecting a frequency event in a power system, the stepwise inertial control (SIC) of a wind turbine generator (WTG) instantly increases the power output for a preset period so as to arrest the frequency drop. Afterwards, SIC rapidly reduces the WTG output to avert over-deceleration (OD). However, such a rapid output reduction may act as a power deficit in the power system, and thereby cause a second frequency dip. In this paper, a hybrid reference function for the stable SIC of a doubly-fed induction generator is proposed to prevent OD while improving the frequency nadir (FN). To achieve this objective, a reference function is separately defined prior to and after the FN. In order to improve the FN when an event is detected, the reference is instantly increased by a constant and then maintained until the FN. This constant is determined by considering the power margin and available kinetic energy. To prevent OD, the reference decays with the rotor speed after the FN. The performance of the proposed scheme was validated under various wind speed conditions and wind power penetration levels using an EMTP-RV simulator. The results clearly demonstrate that the scheme successfully prevents OD while improving the FN at different wind conditions and wind power penetration levels. Furthermore, the scheme is adaptive to the size of a frequency event.

• 자원환경지질
• /
• 제23권1호
• /
• pp.87-104
• /
• 1990

Foliated granites between Damyang and Jinan are subdivided into Daegang foliated granite, Foliated hornblende biotite granodiorite, Sunchang foliated granodiorite, Foliated two mica granite and Samori foliated granite by mineral and texture. From EPMA data of the foliated granites following results are achieved. Composition of plagioclase are correspond to andesine, oligoclase and albite in Foliated hornblende biotite granodiorite, Sunchang foliated granodiorite and other foliated granites, respectively. And amphiboles are calcic hornblende in Foliated hornblende biotite granodiorite, and riebeckite in Daegang foliated granite. In differentiation index(D. I.) and Larsen index(L. I.), Daegang foliated granite, Foliated two mica granite and Samori foliated granite which belong to granite are 83.12-95.54 and 25.86-29.05 and Foliated hornblende biotite granodiorite and Sunchang foliated granodiorite of diorite to granodiorite are 54.99-78.54(D. I.) and 6.48-21.01(L. I.). Harker and AMF diagrams plotted from foliated granites show that the granites are product of calc alkali rock series orignated from co-magma. Characteristic foliation of foliated granites fromed by ductile deformation at deep zone of dextral strike slip fault. Foliated granites are considered as a series of differentiated product of Triassic Igneous activity of Songrim disturbance. According to REE, (La/Lu) and Eu/Sm, Foliated hornblende biotite granodiorite and Sunchang foliated granodiorite are correspond to granodiorite, and other foliated granites are monzo-and syeno-granite. Foliated granites having 0.20-0.01 of Em/Sm ratio are plutons emplaced by the tectonic setting in continents and continental margin.

• 경영과학
• /
• 제17권1호
• /
• pp.117-134
• /
• 2000

Pubilc utility industries including the electric utility industry are facing a new stream of privatization com-petition with the private sector and deregulation. The necewssity to solve now and in the future power supply and demand problems has been increasing through the sophisticated generation expansion plan(GEP) approach con-sidering not only KEPCo's supply-side resources but also outside resources such as non-utility generation(NUG) demand-side management (DSM). Under the environmental situation in the current electric utility industry a new approach is needed to acquire multiple resources competitively. This study presents the development of a modified electric generation expansion analysis system(EGEAS) model with avoided cost based on the existing EGEAS model which is a dynamic program to develope an optimal generation expansion plan for the electric utility. We are trying to find optimal GEP in Korea's case using our modified model and observe the difference for the level of reliabilities such as the reserve margin(RM) loss of load probability(LOLP) and expected unserved energy percent(EUEP) between the existing EGEAS model and our model. In addition we are trying to calculate avoided cost for NUG resources which is a criterion to evaluate herem and test possibility of connection calculation of avoided cost with GEP implementation using our modified model. The results of our case study are as follows. First we were able to find that the generation expansion plan and reliability measures were largely influenced by capacity size and loading status of NUG resources, Second we were able to find that avoided cost which are criteria to evaluate NUG resources could be calculated by using our modified EGEAS model with avoided cost. We also note that avoided costs were calculated by our model in connection with generation expansion plans.

• 전자공학회논문지
• /
• 제54권8호
• /
• pp.115-122
• /
• 2017

본 논문에서는 슬라이닥을 이용하는 새로운 역률보상시스템을 제안한다. 제안하는 역률보상시스템은 슬라이닥의 출력전압을 커패시터에 인가하여 역률을 보상하는 구조이다. 기존의 커패시터 뱅크 방법을 이용하는 역률보상시스템은 선택 가능한 커패시터 용량이 한정되어 있어 부하 상황에 따라 역률 보상 오차가 발생하지만, 제안 시스템은 커패시터 인가 전압을 슬라이닥을 이용하여 세밀하게 변화시킬 수 있어 변화하는 부하를 추종하여 오차 없이 역률을 100%까지 보상할 수 있다. 기존 시스템과 제안 시스템을 비교하여 제시하고, 제안 시스템의 역률 보상 성능이 우수함을 모의실험과 실험을 통해 확인한다. 제안 시스템을 수용가에 설치할 경우 역률 개선을 통한 전기료 감소, 선로손실 감소, 부하 용량 증대 효과가 기대된다. 특히 발전 사업가측에서는 역률 보상 성능의 향상으로 송전 여유 용량 확보와 발전량 절감이 가능하다.