• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.12
• /
• pp.713-715
• /
• 2005

The work in this paper presents development of fuzzy logic-based energy management strategy for a fuel cell hybrid electric vehicle. In order for the fuel cell system to overcome the inherent limitation such as slow response time and low fuel economy especially at the low power region, the battery system has come to compensate for the fuel cell system. This type of hybrid configuration has many advantages, however, the energy management strategy between power sources is essentially required. For the optimal power distribution between the fuel cell system and the battery system, a fuzzy logic-based energy management strategy is proposed. In order to show the validity and the robustness of suggested strategy, some simulations are performed for the standard drive cycles.

• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.238-247
• /
• 2023

The present work represents a technical guideline for decommissioning a disused teletherapy machine model Theratron-780 and contains category one ⁶⁰Co radioactive source. The first section predicts the dose rate from the source in case of normal and radiological emergency situations via FLUKA-MC simulation code. Moreover, the dose assessment for the occupational during the whole process is calculated and compared to the measured values. A suggested cordoned area for safety and security in a radiological emergency is simulated. The second section lists the whole process's technical procedures, including (preview, dismantle, securing, transport and storage) of the disused teletherapy machine. Results show that the maximum obtained accumulated dose for occupational were found to be 24.5 ± 4.9 μSv in the dismantle and securing process in addition to 3.5 ± 1.8 μSv during loading on the transport vehicle and unloading at the storage facility. It was found that the measured accumulated dose for workers is in good agreement with the estimated one by uncertainty not exceeding 5% in normal operating conditions.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.3
• /
• pp.299-305
• /
• 2015

Global environmental concerns and the ever increasing need of energy, coupled with steady progress in renewable energy technologies, are opening up new opportunities for utilization of renewable energy resources. Distributed electricity generation is a suitable option for sustainable development thanks to the load management benefits and the opportunity to provide electricity to remote areas. Solar energy being easy to harness, non-polluting and never ending is one of the best renewable energy sources for electricity generation in present and future time. Due to the random and intermittent nature of solar source, PV plants require the adoption of an energy storage and management system to compensate fluctuations and to meet the energy demand during night hours. This paper presents an efficient, economic and technical model for the design of a MPPT based grid connected PV with battery storage and management system. This system satisfies the energy demand through the PV based battery energy storage system. The aim is to present PV-BES system design and management strategy to maximize the system performance and economic profitability. PV-BES (photovoltaic based battery energy storage) system is operated in different modes to verify the system feasibility. In case of excess energy (mode 1), Li-ion batteries are charged using CC-CV mechanism effectively controlled by fuzzy logic based PID control system whereas during the time of insufficient power from PV system (mode 2), batteries are used as backup to compensate the power shortage at load and likewise other modes for different scenarios. This operational mode change in PV-BES system is implemented by State flow chart technique based on SOC, DC bus voltages and solar Irradiance. Performance of the proposed PV-BES system is verified by some simulations study. Simulation results showed that proposed system can overcome the disturbance of external environmental changes, and controls the energy flow in efficient and economical way.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.144-144
• /
• 2010

Reasonable usage methods of energy resources, which are limited for human beings to use, consists of new & renewable energy (NRE) and demand side management (DSM). All technologies and policies for energy resources are classified into two fields, methods for using new energy resources and methods for using conventional fuel energy resources. Various development activities for these fileds have been implemented and various subsidy programs have been operated to penetrate into markets rapidly. These subsidy programs have various types of subsidy by energy resources and programs and the budget are funded by government, which is called Electric Power Industry Basis Fund and is managed considering technology level, economic analysis, global environment, etc. These subsidy programs are managed by Korea Energy Management Corporation (KEMCO) for NRE and by Korea Electric Power Corporation (KEPCO) for DSM, the management are different among two corporations because the purposes and features of establishment are different though these are all public organization. KEMCO is managing the NRE subsidy programs according to the government will, while the management of KEPCO subjects to power system operations though the government will for DSM is considered. NRE which is on the initial phase of diffusion would not affect on power system seriously but the affects could be grown when the diffusion and importance are expanded. Hence some integrated affection analyses considering NRE and DSM are required and this paper shows the concept of integrated operation strategies with ground source heat pump systems which are related with two fields simultaneously.

• Land and Housing Review
• /
• v.2 no.4
• /
• pp.379-385
• /
• 2011

Energy consumption of building is given a sizable portion in total national energy conservation and if current trends continues, energy conservation level will rise as level of developed country. For this reason, a basic plan is proposed for integrated management system to manage energy conservation of buildings using a link with energy information and building information. Specifically, the questionnaire investigation conducted by building energy expert is performed to determine the projects along with time schedule and demands level of management system. In addition, to investigate study on energy usage information and management situation the management architecture of energy supplier is also studied.

• Korean Management Science Review
• /
• v.32 no.3
• /
• pp.37-54
• /
• 2015

This paper suggests energy efficiency which can be the foundation on corporate profit and effective energy management following by change of global climate and of energy-related regulations. Using comparable financial information and information related to energy use, an DEA (Data Envelopment Analysis) model has been used to identify energy efficiency with DMU (Decision Making Unit)s which are companies subjected to reduce greenhouse gas emission in 2009. Through this research, different from existing researches, environmental variables which can influence on energy efficiency are identified. The results show as follows. First, most of companies follow IRS, which means scale of economy exists among units so that they have more opportunity to increase efficiency by increasing scale of inputs. Second, this research identified that depending on the difference of environmental characters such as the emission structure and the size of companies, energy efficiency of the companies turns out differently.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.4
• /
• pp.343-350
• /
• 2012

The major goal of building energy management is to minimize the energy consumption while maintaining the comfortable environment condition. Nowadays building energy management to save HVAC energy and so on is the most critical issue for existing building service branch with high efficiency equipments and their optimal operation. The effects on the building energy savings of the building equipment retrofit and the improvement of its operation method, especially in the field of HVAC system, were analyzed in this study for domestic small and/or medium sized buildings. Over 8.8% of energy saving was achieved compared withe total energy consumption in commercial building. These results could be used for reasonable maintenance and efficient management of the various building service equipments and related systems.

• Journal of Power Electronics
• /
• v.12 no.6
• /
• pp.954-959
• /
• 2012

A hybrid switch that uses a microelectromechanical system (MEMS) switch as a gate driver of a MOSFET is applied to an energy harvesting system. The power management circuit adopting the hybrid switch provides ultralow leakage, self-referencing, and high current handling capability. Measurements show that solar energy harvester circuit utilizing the MEMS-MOSFET hybrid switch accumulates energy and charges a battery or drive a resistive load without any constant power supply and reference voltage. The leakage current during energy accumulation is less than 10 pA. The power management circuit adopting the proposed hybrid switch is believed to be an ideal solution to self-powered wireless sensor nodes in smart grid systems.

• International Journal of Advanced Culture Technology
• /
• v.6 no.4
• /
• pp.284-291
• /
• 2018

As environmental pollution has become worse green technologies to replace or reduce consumption of fossil fuel get spotlight from government, industry and academia globally. It is reported that 40% of carbon dioxide emission is caused by electricity power generation. And 37% of end user electricity power is used by residential costumer in US. Smart Grid is considered as one of promising technology to alleviate severe environmental problem. In residential environment, Home Energy Management System (HEMS) can play a key role for green smart home. The HEMS can give several benefits like aslowering electric utility bill, improvement of efficiency of electric power consumption and integration of generator using renewable energy resources. However just limited functions of HEMS can be used for residential customer in real life because of lack of smart function in home appliances and optimal managing software for HEMS. This study provides comprehensive analysis for Home Energy Management System for residential customer. Simple HEMS system with real products on the market are explained and limitation of current HEMS are also discussed.

• Advances in Energy Research
• /
• v.8 no.3
• /
• pp.145-153
• /
• 2022

Recent concerns about rising fuel prices and greenhouse gas emissions have focused attention on alternative energy sources, particularly in the transport sector. Transportation consumes 40% of overall fuel usage. As a result, a growing majority of researches on Electric Vehicles (EVs) and their Energy Management Systems (EMS) have been done. In order to enhance the performance and to meet the needs of drivers, more information regarding the EMS is needed. A new Energy Management System is proposed using a FOPID controller. To put the concept into practice, state equations are utilised. The fifth-order state-space model under study is a linked model with several inputs and outputs and the transfer matrices are calculated for decoupling the system. Utilizing these transfer matrices to decouple the system and FOPID controller is used to tune the system. The tuned parameters are minimized using a Particle Swarm Optimization (PSO) approach with Integral Time Absolute Error (ITAE) as the goal. When the suggested FOPID system's results are compared to those of PID-controlled systems, a sizable improvement is observed, which is explained by the results.