• Carbon letters
• /
• v.16 no.1
• /
• pp.41-44
• /
• 2015

We report the preparation of sulfonated reduced graphene oxide (SRGO) by the sulfonation of graphene oxide followed by radiation-induced chemical reduction. Graphene oxide prepared by the well-known modified Hummer's method was sulfonated with the aryl diazonium salt of sulfanilic acid. Sulfonated graphene oxide (SGO) dispersed in ethanol was subsequently reduced by ${\gamma}$-ray irradiation at various absorbed doses to produce SRGO. The results of optical, chemical, and thermal analyses revealed that SRGO was successfully prepared by ${\gamma}$-ray irradiation-induced chemical reduction of the SGO suspension. Moreover, the electrical conductivity of SRGO was increased up to 2.94 S/cm with an increase of the absorbed dose.

• Journal of Radiation Industry
• /
• v.5 no.2
• /
• pp.107-112
• /
• 2011

Electron beam-induced crosslinking of polycaprolactone (PCL) films containing various crosslinking agents (CAs) was investigated in this study. PCL films containing various CAs prepared by a solution casting method were irradiated by electron beams at various absorption doses and the irradiated PCL films were investigated in terms of their crosslinking degree, thermal and mechanical properties, and biodegradability. Based on the results of the crosslinking degree measurement, triallyl isocyanurate was found to be most effective for the electron-beam induced crosslinking of PCL films. The results of the UTM, DMA, and TMA revealed that the thermal and mechanical properties of the crosslinked PCL films were greatly improved in comparison to those of the pure PCL. The results of the enzymatic degradation test revealed that the biodegradability of the crosslinked PCL films was reduced in comparison to that of the pure PCL.

• Journal of Radiation Industry
• /
• v.8 no.1
• /
• pp.53-57
• /
• 2014

The kenaf is quickly developing as a renewable resource. Kenaf can be grown under a wide range of weather conditions. Modification of kenaf fiber by graft polymerization provides a significant route to alter the chemical properties, including surface hydrophilicity or hydrophobicity. In this study, kenaf fiber surfaces were grafted with acrylic acid as a hydrophilic group using electron beam irradiation. The grafting rate increased with an increase in grafting time. The FT-IR results confirmed that acrylic acid was successfully grafted onto the kenaf fibers. The wettability of the kenaf fiber was increased, accompanied by acylic acid grafting on the fiber surface. According to the permeability test result, it was found that acrylic acid grafted kenaf fiber reinforced cement composite was more reduced than non-grafted kenaf fiber reinforced cement composite.

• Journal of Radiation Industry
• /
• v.7 no.1
• /
• pp.23-28
• /
• 2013

In this study, we fabricated high density polyethylene (HDPE) composites filled with antioxidants and UV stabilizers. The electron beam irradiation on the fabricated composites was carried out over a range of absorbed doses from 50 to 200 kGy to confirm the changes of discoloration. The changes of discoloration were characterized using a color difference meter and FT-IR for confirming the changes of the color difference and structural change. It was observed that the color difference of IRGANOX 1010-, IRGAFOS 168-, and TINUVIN 328- added HDPE was higher than that of the control HDPE by electron beam irradiation. The melting temperature of UV stabilizer-added HDPE was not significantly changed by electron beam irradiation. However, the melting temperature of phenol-containing antioxidant-added HDPE was increased with increasing the absorbed dose. And the melting temperature of phosphorus-containing antioxidant-added composite was decreased with increasing the absorbed dose.

• Journal of Radiation Industry
• /
• v.5 no.4
• /
• pp.353-357
• /
• 2011

Degradation of p-nitrophenol has been carried out using only gamma irradiation or gamma irradiation with $H_2O_2$ or $Na_2S_2O_8$. Effects of different operating parameters such as initial concentration ($50mg\;l^{-1}$, $100mg\;l^{-1}$, $200mg\;l^{-1}$, $300mg\;l^{-1}$, $400mg\;l^{-1}$, $500mg\;l^{-1}$ and $600mg\;l^{-1}$) on the extent of degradation has been investigated. At 5 kGy, $50mg\;l^{-1}$ p-nitrophenol was completely degraded, and the radiolytic degradation of p-nitrophenol was described by the pseudo-first-order kinetic model. The combination of gamma irradiation with $H_2O_2$ or $Na_2S_2O_8$ leads to an enhanced effect, which remarkably increased the degradation efficiency of p-nitrophenol and TOC removal. However, at high $H_2O_2$ concentration, the efficacy of p-nitrophenol degradation is reduced because ${\cdot}OH$ radicals are scavenged by $H_2O_2$ and $Na_2S_2O_8$.

• Journal of Radiation Industry
• /
• v.6 no.4
• /
• pp.317-322
• /
• 2012

In this study, the preparation of a temperature-responsive poly(N-isopropylacrylamide) (PNIPAAm)-grafted surface was performed using an eco-friendly and biocompatible ion beam-induced surface graft polymerization. The surface of a perfluoroalkoxy (PFA) film was activated by ion implantation and N-isopropylacrylamide (NIPAAm) was then graft polymerized selectively onto the activated regions of the PFA surfaces. Based on the results of the peroxide concentration and grafting degree measurements, the amount of the peroxide groups formed on the implanted surface was dependant on the fluence, which affected the grafting degree. The results of the FT-IR-ATR, XPS, and SEM confirmed that the NIPAAm was successfully grafted onto the implanted PFA. Moreover, the contact angle measurement at different temperatures revealed that the surface of the PNIPAAm-grafted PFA film was temperature-responsive.

• Journal of Radiation Industry
• /
• v.12 no.4
• /
• pp.349-353
• /
• 2018

Metronidazole (MD), which is used as an antibiotic, is largely used as an oral and skin application agent, and has inhibiting effect on the production of the fungus causing malodor. However, the maximum drug inclusion concentration is 0.75% of skin ointment in commercially available. In this study, hydrogels containing high concentration of metronidazole were prepared by using radiation crosslinking technique based on biocompatible polymers, and release characteristics and antimicrobial properties were evaluated. This study was preliminary carried out to investigate whether it could be used effectively as antibacterial dressing materials.

• Asian-Australasian Journal of Animal Sciences
• /
• v.2 no.3
• /
• pp.299-300
• /
• 1989

• Nuclear industry
• /
• v.17 no.11 s.177
• /
• pp.78-85
• /
• 1997

• Environmental and Resource Economics Review
• /
• v.24 no.1
• /
• pp.189-224
• /
• 2015

To meet sectoral emission target by 2020 and prepare for the emission trading scheme from 2015, decomposition analysis of energy consumption and GHG emission is required by 18 subsectors in industry sector where emission targets are established. Log Mean Divisia Index decomposition method was used to analyze factors' effects on energy and emission in the industry sector and by 18 subsectors from 2004 to 2011. Industrial energy consumption was increased due to the production effect and energy intensity effect. However structure effect contributes to the decrease of energy consumption. In terms of emissions (including indirect emission due to electricity consumption) in the industry sector, only structure effect contributed to the emission reduction. Factors' effects by subsectors were different. Cement industry, which is included at Nonmetal shows different results from those of Nonmetal industry and machinery industry, which is a subsector of Fabricated Metal, was also similar. In this regard, we should not apply the policy implications from decomposition analysis of aggregated industry such as Nonmetal or Fabricated Metal to its subsectors uniformly and develop a differentiated policy for each subsector industry.