• 국제지역연구
• /
• 제20권3호
• /
• pp.3-22
• /
• 2016

본 연구는 중국의 에너지 수요함수를 추정하기 위해 다양한 방법 중 Dynamic OLS(DOLS) 모형을 이용하고, 그 결과를 표준 공적분 모형과 비교하였다. 내생성을 고려한 DOLS 모형은 Johansen 방법과 비슷한 추정값을 보이지만, Engle-Granger(EG) 모형은 편의를 가지는 것으로 나타났다. DOLS 모형의 결과를 중심으로 살펴보면 중국의 에너지 수요함수 추정결과 노동인구 1인당 실질 GDP가 1% 상승하면 에너지 소비가 0.83% 증가하고, 에너지 가격 1%가 상승하면 에너지 수요는 0.45% 정도 감소하는 것으로 나타났다. 향후 중국의 에너지 소비는 지속적으로 성장할 것으로 예상되며, 우리나라는 세계 에너지 수요 증가와 온실가스 저감에 대비하는 에너지 정책을 수립해야 한다.

• 전기학회논문지
• /
• 제57권3호
• /
• pp.369-374
• /
• 2008

This paper presents the evaluation procedures and the estimation method for the estimation of optimal rebate level for EE(Energy Efficiency) programs. The penetration amount of each appliance is estimated by applying price function to preferred diffusion model resulted from model compatibility test. To estimate the optimal rebate level, two objective functions which express the maximum energy saving and operation benefit are introduced and by multi-objective function which can simultaneously consider two objective functions the optimal rebate level of each appliance is estimated. And then, using the decided rebate level and each penetration amount, the priority order for reasonable investment of each high-efficiency appliance is estimated compared to the results of conventional method. Finally, using a benefit/cost analysis based on California standard practice manual, the economic analysis is implemented for the four perspectives such as participant, ratepayer impact measure, program administrator cost and total resource cost.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권5호
• /
• pp.587-592
• /
• 2005

The ESS(Energy Saving System) is designed to have functions of controlling. monitoring for cooling system. etc. ESS consists of the I/O module, CPU module and Display module I/O module detects various ESS data on local area and treats signals via I/O interface system. The interface system receives various status data and outputs control signals. ESS is tested with dummy signal to verify proposed functions and is shown good results. For future study ESS will be tested under real condition in the ship.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2013년도 전력전자학술대회 논문집
• /
• pp.475-476
• /
• 2013

In single-phase flyback inverter for grid-connected PV-AC module, power ripple is occurred as two times grid frequency on input capacitor. So, decoupling method has attracted interest recently. Also, power generation of PV depending on irradiation is limited at particular time, so use of energy storage system can increase energy efficiency. In this paper, flyback inverter for grid-connected PV-AC module which can operate decoupling and energy storage functions is proposed and verified by PSIM simulation.

• 문화기술의 융합
• /
• 제9권6호
• /
• pp.1001-1006
• /
• 2023

전 세계적인 에너지 비용 상승과 에너지 수요 증가는 공급망 전반에 걸쳐 상당한 양의 에너지를 소비하는 식품가공·제조업에 있어 중요한 문제이다. 이에 에너지 사용을 최적화할 수 있는 실시간 에너지 모니터링 및 분석 시스템의 개발이 필요하다. 본 연구에서는 식품공장에 설치된 IoT를 기반으로 각 설비별 모니터링과 열처리 공정에 관한 에너지 공급·사용량 모니터링, 검색 기능이 포함된 식품 공장 에너지 모니터링 시스템이 제안되었다. 본 시스템은 식품가공공장의 IoT 센서를 기반으로 PLC, 데이터베이스 서버, OPC-UA서버, UI 서버 및 API 서버와 CIMON 사의 HMI 등으로 구성된다. 시스템은 식품공장의 빅데이터 구축과 함께 수집 기능을 통한 설비별 모니터링과 열처리 공정에 관한 에너지 공급·사용량 모니터링 및 검색 서비스 기능을 제공한다. 본 데이터 수집 기반 에너지 모니터링 시스템은 에너지 절감을 위한 중소기업형 공장 에너지 모니터링·관리 시스템 개발을 위한 가이던스 역할이 될 것이다. 향후, 본 시스템을 활용하여 에너지 사용량 파악 및 분석을 통한 공정 작업이 최적화된 정량적인 에너지 절감 방안이 마련될 수 있다.

• Nuclear Engineering and Technology
• /
• 제46권2호
• /
• pp.273-280
• /
• 2014

The spectrum weighted responses of various detectors were calculated to provide guidance on the proper selection and use of survey instruments on the basis of their energy response characteristics on the neutron fields. To yield the spectrum weighted response, the detector response functions of 17 neutron-measuring devices were numerically folded with each of the produced calibration neutron spectra through the in-house developed software 'K-SWR'. The detectors' response functions were taken from the IAEA Technical Reports Series No. 403 (TRS-403). The reference neutron fields of 21 kinds with 2 spectra groups with different proportions of thermal and fast neutrons have been produced using neutrons from the $^{241}Am$-Be sources held in a graphite pile, a bare $^{241}Am$-Be source, and a DT neutron generator. Fluence-average energy ($E_{ave}$) varied from 3.8 MeV to 16.9 MeV, and the ambient-dose-equivalent rate [$H^*(10)/h$] varied from 0.99 to 16.5 mSv/h.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2003년도 추계총회 및 학술발표회
• /
• pp.51-51
• /
• 2003

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.203-206
• /
• 2002

The present study proposes a theoretical model for predicting the matrix crack density growth of each layer in composite laminates subjected to thermo-mechanical loads. Each layer with matrix cracks is treated as an equivalent continuum of degraded elastic stiffnesses which are functions of the matrix crack density in each slyer. The energy release rate as a function of the degraded elastic stiffnesses is then calculated for each layer as functions of thermo-mechanical loads externally applied to the laminate. The matrix crack densities of each layer in general laminates are predicted as functions of the thermo-mechanical loads applied to a number of laminates. Comparisons of the present study with experimental data in the open literatures are also provided.

• Journal of Communications and Networks
• /
• 제14권4호
• /
• pp.410-417
• /
• 2012

One of the premier mechanisms used in extracting unobserved signals from observed mixtures in signal processing is employing a blind source separation (BSS) algorithm. Orthogonal frequency division multiplexing (OFDM) techniques are playing a prominent role in the sphere of multicarrier communication. A set of remedial solutions taken to mitigate deteriorative effects caused within the air interface of OFDM transmission with aid of BSS schemes is presented. Four energy functions are used in deriving the filter coefficients. Energy criterion functions to be optimized and the performance is justified. These functions together with iterative fixed point rule for receive signal are used in determining the filter coefficients. Time correlation properties of the channel are taken advantage for BSS. It is tried to remove colored noise and jamming components from themixture at the receiver. Themethod is tested in a slow fading channel with a receiver containing equal gain combining to treat the channel state information values. The importance is that, these are quite low computational complexity mechanisms.

• Structural Engineering and Mechanics
• /
• 제44권3호
• /
• pp.267-288
• /
• 2012

Free vibration analysis of arbitrary quadrilateral thick plates with internal columns and elastic edge supports is presented by using the powerful pb-2 Ritz method and Reddy's third order shear deformation plate theory. The computing domain of arbitrary quadrilateral planform is mapped onto a standard square form by coordinate transformation. The versatile pb-2 Ritz functions defined by the product of a two-dimensional polynomial and a basic function are taken to be the admissible functions. Substituting these displacement functions into the energy functional and minimizing the total energy by differentiation, leads to a typical eigenvalue problem, which is solved by a standard eigenvalue solver. Stiffness and mass matrices are numerically integrated over the plate by using Gaussian quadrature. The accuracy and efficiency of the proposed method are demonstrated through several numerical examples by comparison and convergency studies. A lot of numerical results for reasonable natural frequency parameters of quadrilateral plates with different combinations of elastic boundary conditions and column supports at any locations are presented, which can be used as a benchmark for future studies in this area.