• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.1
• /
• pp.181-193
• /
• 2014

The environment of supply chains is rapidly changed to global and eco-freindly work process. However, at current environment, it is not easy to grasp work flow and to analyze energy efficiency. Improving energy efficiency and visibility for goods flow can contribute to increases in customer attitudes and reductions in overall production costs Additionally, it can lead to increases in work efficiency and reductions in overall production costs. Until recently, efforts to improve energy performance focused on manufacturing industry. Those efforts have expanded to the supply chain. In this paper, we perform business process modeling about supply chain for visibility and sustainability - information and component flows - from assembly plants to logistics. This paper defines the work and information flows by modeling the underlying logical structures of the supply chain and the business processes that determine impact of visibility and sustainability. We model processes using the modeling methodology specified by UN/CEFACT. This methodology explains business process functionality and business transactions by UML diagram. The output of this paper would be useful in grasping work flow and capturing the used energy.

• Resources Recycling
• /
• v.21 no.1
• /
• pp.66-74
• /
• 2012

In order to evaluate the feasibility of selective sulfidization of uranium and rare-earth(RE) oxides, an analysis on thermodynamic data, such as $M-O_2-S_2$ phase stability diagram and changes of Gibbs free energy for sulfidization of uranium and rare-earth oxides were carried out. Comparing $RE-O_2-S_2$ with $U-O_2-S_2$ phase stability diagram at wide range of sulfur potential, $UO_2$ remains unreacted, while RE oxides are sulfidized. The Gibbs free energy change(${\Delta}G^{\circ}$) of sulfidization of RE oxides is lower than that of uranium oxides. Thus, the selective formation of RE sulfides is possible during sulfidization of RE and uranium oxides at lower temperature. $CS_2$ was selected as a sulfidizing agent, because it is a stronger sulfidizing agent than other agents and reacts at lower temperature.

• Conservation and Restoration of Cultural Heritage
• /
• v.1 no.1
• /
• pp.9-22
• /
• 2012

The most widely excavated iron artifacts used as weapons or farm tools from central southern regions of Korea were subjects of non-metallic inclusion analysis through metallographic examination, microhardness measurement, and scanning electron microscopy with energy dispersive X-ray spectroscopy. Through metallographic interpretation and study of the analyzed results, the steel manufacturing and iron smelting using heat processing in the iron artifacts excavated from the central southern region of the ancient Korean peninsula was studied, and the analysis of the non-metallic inclusions mixed within the metallic structures was interpreted as the ternary phase diagram of the oxide to infer the type of iron ores for the iron products and the temperature of the furnace used to smelt them. Most of the ancient forged iron artifacts showed $Al_2O_3/SiO_2$ with high $SiO_2$ contents and relatively low $Al_2O_3$ contents for iron ore, indicating t hat for $Al_2O_3$ below 5%, it is presumed that magnetic iron ores were reduced to bloom iron (sponge iron) with direct-reduction process for production. The temperature for extraction of wustite for $Al_2O_3$ below 1% was found to be $1,020{\sim}1,050^{\circ}C$. Considering the oxide ternary constitutional diagram of glassy inclusions, the steel-manufacturing temperature was presumed to have been near $1,150{\sim}1,280^{\circ}C$ in most cases, and minimum melting temperature of casting iron part excavated in Daeseong-ri. Gyeonggi was near $1,400^{\circ}C$, and it is thought that hypoeutectic cast iron of about 2.3% carbon was casted and fragility of cast iron was improved by decarburizing in solid state.

• International Journal of Advanced Culture Technology
• /
• v.10 no.3
• /
• pp.184-191
• /
• 2022

Unity Painting is a concept that the researcher put forward to locate his own creative style in his creation. Unity Painting, with a clue of reflecting the characteristics of contemporary oriental visual culture, combines the contemporary painting features of a variety of western painting languages. It aims to link the painting system formed in the context of oriental culture with the world's contemporary art and try to present a new contemporary painting with oriental genes. According to the Chinese literature, the researcher sorted out the five main colors (五正色), ten colors for Heavenly Stems (十天干色彩), five intermediate colors (五间色), and five colors as the expression of the Chi of Thriving and Fading and the Chi of Birth and Death, and deduced the summary and stipulation of the color of yin-yang and five elements under the concept of Unity Painting. Based on this, the researcher drew the color-phase and its variation stipulation diagram of ten colors for Heavenly Stems, the orientation of Heavenly Stems (天干方位), color-phase variation diagram (色相变化图), as well as the stipulation system diagram of the five elements (五行), Heavenly Stems and Earthly Branches (干支), energy, time and colors. Through the research and collation of the literature, the researcher took the stipulated five elements color (五行色彩) as the basis of the color concept of creation to complete the work. This paper discusses how to find the starting point of contemporary art creation in the context of traditional oriental culture, sorts out the practical creation logic, and provides ideas for subsequent researchers, with a view to better establishing the identity of the creator and providing research significance and value in the context of the study of oriental art.

• Ocean Systems Engineering
• /
• v.14 no.2
• /
• pp.171-210
• /
• 2024

This paper focuses on the rigorous and holistic fatigue analysis of mooring chains for a deep draft semi-submersible platform in the challenging environment of the central Gulf of Mexico (GoM). Known for severe hurricanes and strong loop/eddy currents, this region significantly impacts offshore structures and their mooring systems, necessitating robust designs capable of withstanding extreme wind, wave and current conditions. Wave scatter and current bin diagrams are utilized to assess the probabilistic distribution of waves and currents, crucial for calculating mooring chain fatigue. The study evaluates the effects of Vortex Induced Motion (VIM), Out-of-Plane-Bending (OPB), and In-Plane-Bending (IPB) on mooring fatigue, alongside extreme single events such as 100-year hurricanes and loop/eddy currents including ramp-up and ramp-down phases, to ensure resilient mooring design. A detailed case study of a deep draft semi-submersible platform with 16 semi-taut moorings in 2,500 meters of water depth in the central GoM provides insights into the relative contributions of wave scatter diagram, VIMs from current bin diagram, the combined stresses of OPB/IPB/TT and extreme single events. By comparing these factors, the study aims to enhance understanding and optimize mooring system design for safety, reliability, and cost-effectiveness in offshore operations within the central GoM. The paper addresses a research gap by proposing a holistic approach that integrates findings from various contributions to advance current practices in mooring design. It presents a comprehensive framework for fatigue analysis and design optimization of mooring systems in the central GoM, emphasizing the critical importance of considering environmental conditions, OPB/IPB moments, and extreme single events to ensure the safety and reliability of mooring systems for offshore platforms.

• Journal of the Korean Society of Combustion
• /
• v.20 no.4
• /
• pp.26-33
• /
• 2015

American NREL (National Renewable Energy Laboratory) reported that BD20 could reduce PM, CO, SOx and cancerogenic matters by 13.6%, 9.3%, 17.6% and 13% respectively, compared to diesel fuel. BD20 has been being tested on garbage trucks and official vehicles at Seoul City, which is positive on air environment, but negative on combustion by higher viscosity in winter season. This study investigated the combustion characteristics by employing multi cavity piston for improving the deterioration of combustibility caused by the higher viscosity of the biodiesel fuel such as BD20 with the combustion flames taken by a high speed camera and the cylinder pressure diagram. A 4-cycle single cylinder diesel engine was remodeled to a visible 2-cycle engine for taking the flame photographs, which has a common-rail injection system. The test was done at laboratory temperature of about $4{\sim}5^{\circ}C$.

• YAKHAK HOEJI
• /
• v.35 no.5
• /
• pp.372-378
• /
• 1991

To increase the stability and bioavailability of Omeprazole(OMP), which is used newly as a proton-pump inhibitor, inclusion complex of OMP with $\beta$-cyclodextrin($\beta$-CD) was prepared by coprecipitation method and its characteristics were ascertained by means of solubility test, DSC, IR, and the accelerated stability analysis. The type of OMP inclusion complex is classified as Bs-type on phase solubility diagram, and the stoichiometric ratio of OMP: $\beta$-CD complex is 1:2 and formation constant is 80.82/mole. The solubility of the complex could be increased remarkably by complexation compare with OMP. Degradation process of both OMP and OMP complex followed apparent first-order kinetics, of which degradation rate constants and activation energies are k$_{25}$=8.1$\times$10$^{-4}$/day, E$_{a}$=22 Kcal/mole (OMP), and k$_{25}$=4.65$\times$10$^{-6}$/day, E$_{a}$=35 Kcal/mole (complex), respectively. These results show the increase of the stability and solubility of OMP markedly, therefore it is believed that the improvement of stabilization for OMP by inclusion complexation might be practically available.

• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.5
• /
• pp.509-515
• /
• 2014

At the fuel processing system (FPS) of fuel cell vehicle, hydrogen recirculation blower (HRB) is used for the recirculation of remained hydrogen after reaction. In this paper, noise and vibration improvement of HRB is studied by changing design and control. It is checked the campbell diagram and critical speed for stability of rotor, and housing stiffness is improved using simulation of frequency response function (FRF). A method is suggested that can decrease the unbalance amount of the rotor and impeller which main source of noise and vibration. In order to reduce the noise during deceleration of blower, electrical braking is applied and tested the risk impact of durability. Founded the optimum switching frequency of the motor control, and reduced the idle rpm by increasing of aerodynamic performance. The superiority of paper is proved by measurement of the improved product's noise and vibration.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.18 no.5
• /
• pp.1285-1290
• /
• 2004

From a view point of Hyungsang medicine a study is made on depressive syndromes through 'Donguibogam(東醫寶鑑)' ,'Clinical lectures by Mr. Jeesan(芝山先生 臨床學特講)' and other literature. Depressed energy(?) originally meant the disorder of vital energy in the circulation of nature with the lapse of time. In later, it has been changed to mean the disease of man, especially related to the mind. Depressive syndromes come from the stagnation of the Ki or the abnormal circulation(rising, falling, coming and going), which happens when man cannot adjust oneself to the circumstances due to the disharmony between internal and external conditions. Depressive syndrome easily attacks the following types of persons; Dam type person with excessive Ki and deficient Hyung(形), manly woman, womanly man, Bird type person who shows a great variety of emotion, Turtle type person declined to melancholy, Ki type person apt to be depressive, and Shin type person with upward gush of the fire. It also attacks the persons who have smudgy face with the scar between eyebrows, those whose pulses are mixture of two different kinds and those whose pulses extend on two ranges in Jeesan's diagram. Depressive syndromes recorded in 'Donguibogam' are globus hystericus, chest congestion, gastric discomfort, cough and asthma caused by depressed Ki, abdominal mass, edema, and tympanites. The most effective prescriptions for depressive syndromes are Eajintang(二陳湯), Guibitang(歸脾湯), Hyangsosan(香蘇散), and Gamisachiltang(加味四七湯).

• Korean System Dynamics Review
• /
• v.4 no.2
• /
• pp.153-171
• /
• 2003

In this study, we tried to build a model which can deal with the efficient and effective operation of electric power industry, especially focused on the nuclear industry. Here, SD(system Dynamics) approach is used to visualize the underlying phenomenon of the nuclear power industry. SD is a methodology for studying and managing complex feedback systems, such as one finds in business and other social systems, The span of SD applications has grown extensively and now encompasses work in corporate planning and policy design, public management and policy, biological and medical modeling, energy and the environment. Recently, according to the report from KEPCO(Korea Electric Power Corporation), they are considering delaying a new power plant construction. It may be based upon business fluctuation downsized from Korean economic crisis in 1997 and freezing of construction funds due to unstable foreign exchange rate. At this point, we need desperately a kind of strategic model that would contribute to cope with the current business situation, energy generation, Production, and resulting Pollution. Specifically, this model, using SD approach, starts with the detailed drawing of influence diagram, which describes those relevant key points on nuclear power generation systems in electric power industry of Korea. These include such (actors as the operation of nuclear industry and parameters related to the decision making for business policy. Based upon the above-mentioned influence diagram drawn, we developed SD simulation model to evaluate and analyze strategic management of KBPCO. Based on our analysis, we could demonstrate how simulation model can be applied to the real electric power generation in Korea.