• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.165.1-165.1
• /
• 2011

In the present study, two numerical methods were developed and compared for the performance prediction of the horizontal axis energy conversion turbine. The Blade Element Momentum Theory was adopted, and the rotating reference frame method for Computational Fluid Dynamics solver was also used. Hybrid meshing was used for the complex geometry of turbines. The analysis results using each method were compared to figure out a better method for the performance prediction.

• 조명전기설비학회논문지
• /
• 제18권4호
• /
• pp.83-87
• /
• 2004

본 논문에서는 Magnetic Levitation Model 시스템을 이용하여 선형 액추에이터의 기본모델을 제안하고 전원 공급부의 입력 주파수의 변화로부터 액추에이터에 나타나는 현상을 Matlab프로그램을 활용하여 간접적 방법으로 고찰하였다. 그 결과는 실제적인 설계에 적용할 경우 설계 프로그램의 자료나 부분적 변경 시 참조 할 수 있으리라 사료된다. 본 논문에서 제안한 에너지 변환을 고려한Linear Actuator M3d진 시스템의 출력은 입력 주파수의 변화로부터 액추에이터가 고주파보다는 저주파에서 권선부에 나타나는 파형의 응답이 기준 입력파형에 더 근접함을 알 수 있었다. 이 결과를 바탕으로 Linear Actuator Model 시스템의 동작 시 특성이 실제 시스템에 활용할 때 간접적 방법으로 상당히 유용함을 확인 할 수 있었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.155-162
• /
• 2010

Recently, due to high oil prices and environmental pollution issues, interest of alternative energy development increases and the related research is widely conducted. Among those research activities the tidal stream power generation utilizes the tidal flow as its mechanical power resource and less depends on the environmental condition for installation and operation than other renewable energy resources. Therefore the amount of power generated is quite consistent and straightforward to predict. However, research on the tidal stream energy conversion turbine is rarely found. In the present study, two numerical methods were developed and compared for the open water Momentum Theory, which is widely used for wind turbines, was adopted. The moving reference frame method for Computational Fluid Dynamis solver were also used. Hybrid meshing was used for the complex geometry of turbines. The analysis results using each method were compared to figure out a better method for the performance prediction.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.469-472
• /
• 2004

본 논문에서는 직선형 피스톤 액추에이터의 응용모델을 제안하고 이를 구현하였다. 구성된 액추에이터의 해석을 위해서 패러데이 법칙으로부터 기본 방정식을 유도하였고, 이를 바탕으로 소형, 경량, 고속 응답을 요구하는 시스템에 적용 가능한 실험적 자료를 얻었다. 또한 본 논문에서는 자계로부터 일반적으로 구할 수 있는 전자기력을 에너지 변환 이론적 관점에서 기계 방정식과 결합하고 전원 공급부의 인가 전압의 변화로부터 액추에이터에 나타나는 현상을 Matlab 프로그램을 활용하여 간접적 방법으로 고찰하였다. 그 결과는 실제적인 설계에 적용할 경우 설계 프로그램의 자료나 부분적 변경시 참조 할 수 있으리라 사료된다. 이 결과를 바탕으로 Linear Actuator MfdBl 시스템과 구현된 직선형 피스톤 액추에이터의 동작이 실제 시스템에 활용될 수 있는 방법으로 가능함을 검증할 수 있었다.

• 한국해양공학회지
• /
• 제10권2호
• /
• pp.136-145
• /
• 1996

The theory is based on two thermodynamic equations for the air mass in the air column and bydrodynamic equation for the relation between the response of the air in the water column and the incident wave. The numerical model is experimented in a two dimensional water tank and the caisson model with sloped front wall is tested in the large towing tank.

• Korean Journal of Acupuncture
• /
• 제21권1호
• /
• pp.129-147
• /
• 2004

Objectives and methods : This research aims to study about conversion system of channels. In the present study, we investigated the movement and conversion of channels on the base of three step theory(三才論), Yeak(易), Hado.Laksea(河圖洛書) and five elements motion and six kinds of factors(Six-Qi). Results and Conclusions : The organization of meridian is composed of the following three parts: hand and foot, Yin and Yang, and the viscera and bowals. It is play an important role in energy flow and its conversion. The law governing energy conversion is divided into three groups i.e. taiyin-yangming channel, shaoyin-taiyang channel and jueyin-shaoyang channel group. Those are composed of Deadea(對待) of Six-Qi, making the body homeostasis. Taken together, we suggest that the conversion system of meridian is founded on the unity between the human body and nature which provides the medical workers with a necessary method of thinking in treating diseases.

• Geomechanics and Engineering
• /
• 제37권1호
• /
• pp.9-19
• /
• 2024

This study presents an energy analysis for large-strain cavity expansion problem based on the general strength criterion and energy theory. This study focuses on the energy dissipation problem during the cavity expansion process, dividing the soil mass around the cavity into an elastic region and a plastic region. Assuming compliance with the small deformation theory in the elastic region and the large deformation theory in the plastic region, combined with the general strength criterion of soil mass and energy theory, the energy dissipation solution for cavity expansion problem is derived. Firstly, from an energy perspective, the process of cavity expansion in soil mass is described as an energy conversion process. The energy dissipation mechanism is introduced into the traditional analysis of cavity expansion, and a general analytical solution for cavity expansion related to energy is derived. Subsequently, based on this general analytical solution of cavity expansion, the influence of different strength criterion, large-strain, expansion radius, cavity shape and characteristics of soil mass on the stress distribution, displacement field and energy evolution around the cavity is studied. Finally, the effectiveness and reliability of theoretical solution is verified by comparing the results of typical pressure-expansion curves with existing literature algorithms. The results indicate that different strength criterion have a relatively small impact on the displacement and strain field around the cavity, but a significant impact on the stress distribution and energy evolution around the cavity.

• 한국항해학회지
• /
• 제14권4호
• /
• pp.41-52
• /
• 1990

부유식 진동수주형 파력발전기는 불규칙한 해상 상태에서의 작동으로 인하여 흡수효율의 저하를 필수적으로 수반한다. 본 논문에서는 입사파의 에너지를 적절히 흡수할 수 있는 파력발전기를 초기설계하여 모델로 이용하였으며, 이 모델의 유체력추정에는 3차원 특이점 분포법을 사용하였다. 그리고, 가변구조 시스템으로 알려진 슬라이딩 모드기법을 이용하여 파의 상태 변화에 따른 파력발전기의 자세와 위치를 제어함으로써 흡수파력의 효율을 중대시킬 수 있는 시스템을 제안하고 있다.

• 전기의세계
• /
• 제30권4호
• /
• pp.219-226
• /
• 1981

The magnetic field distribution in saturable iron part of electromagnetic energy conversion divices is defined by the nonlinear quasi-Poisson enquation that is described the electromagnetic field characteristics and satisfied the natural boundary condition. The solution of this equation is obtained by minimizing an energy functional by means of trial function that defined in triangular subregion of two-dimensional field region. As a result, the accuracy of the machine design is increased by use of its solution. In this respect, this study is developed the basic theory to analyze the magnetic flux distribution in saturable iron part and air gap of induction motor that its secondary part is short circuit by the variational principle, the minimized theory of energy functional, the application of F.E.M., and treatment of computer. As theoritical data compared with the practics, the validity of the theory in this study is supported by experimental findings.

• Journal of Power Electronics
• /
• 제10권5호
• /
• pp.538-547
• /
• 2010

This paper deals with a stand-alone wind energy conversion system (WECS) with an isolated asynchronous generator (IAG) and voltage and frequency (VF) control feeding three-phase four-wire loads. The reference generator currents are estimated using the instantaneous symmetrical component theory to control the voltage and frequency of an IAG system. A three-leg voltage source converter (VSC) with an isolated star/delta transformer is used as an integrated VSC. An integrated VSC with a battery energy storage system (BESS) is used to control the active and reactive powers of the WECS. The WECS is modeled and simulated in MATLAB using the Simulink and the Sim Power System (SPS) toolboxes. The proposed VF controller functions as a voltage and frequency regulator, a load leveler, a load balancer and a harmonic eliminator in the WECS. A comparison is made on the rating of the VSC with and without ac capacitors connected at the terminals of an IAG. Simulation and test results are presented to verify the control algorithm.