• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.9
• /
• pp.1193-1200
• /
• 2001

There are many regulation test methods to be related with engine emissions such as CVS-75, D-13, ECE-15 modes and so on. Most of these modes are consisted of lots of transient conditions that have rapid acceleration, deceleration and cranking modes. In this experimental research, the engine characteristics of cranking, accelerating and power output in a S.I. engine were studied to compare with neat gasoline and alternative fuels of M30 (methanol 30%, aromatic series 32%, non-aromatic 38%) and M50 (methanol 50%, aromatic 30%, non-aromatic 20%) for performance and exhaust emissions. The results show that reformulated methanol fuels are better emissions reduction of 15.7% over than that of neat gasoline fuel especially in HC and CO emissions at cranking mode. And the accelerating performances coincide with the results of distillation curve. CO concentration for M50 fuel is varied in a just little for the condition of slow acceleration. At wide-open throttle condition, brake specific energy consumption of reformulated fuels is increased and thermal efficiency is some what lower than that of gasoline fuel.

• Journal of KIISE:Information Networking
• /
• v.33 no.2
• /
• pp.131-138
• /
• 2006

To achieve security in wireless sensor networks(WSN), it is important to be able to encrypt and authenticate messages sent among sensor nodes. Due to resource constraints, many key agreement schemes used in general networks such as Diffie-Hellman and public-key based schemes are not suitable for wireless sensor networks. The current pre-distribution of secret keys uses q-composite random key and it randomly allocates keys. But there exists high probability not to be public-key among sensor nodes and it is not efficient to find public-key because of the problem for time and energy consumption. To remove problems in pre-distribution of secret keys, we propose a new cryptographic key management protocol, which is based on the clustering scheme but does not depend on probabilistic key. The protocol can increase efficiency to manage keys because, before distributing keys in bootstrap, using public-key shared among nodes can remove processes to send or to receive key among sensors. Also, to find outcompromised nodes safely on network, it selves safety problem by applying a function of lightweight attack-detection mechanism.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.2
• /
• pp.24-29
• /
• 2014

In general, a large-capacity axial flow fan is used for industrial processes or ventilation in a social overhead capital infrastructure. The main characteristics of the large axial-flow fan need a lot of electrical power consumption and operate 24 hours a day, 365 days a year. Since the large axial flow fan consumes several hundreds to thousands kW per hour, both manufacturer and consumer are struggling to select high efficiency products for saving energy and reducing operation cost. Therefore, the performance testing should be accurately conducted in experimental equipments. The performance estimation and uncertainty of measurement of the axial-flow fan gathered from the result from nozzle shaped testing equipments certified with ANSI/AMCA standard and duct shaped testing equipment under the same experimental condition. The experimental results from both facilities have maximum 17% differences in performance evaluation and uncertainty of measurement. As considering that the differences, it is doubt about the reliability of testing result. The test was repeated with the specific term during 12 months because it is important to fully reflect the real conditions and to decide the repeatability of data. The evaluation of duct type testing facilities was failed to get an uncertainty measure. Testing results were previously published. As a series of previous paper, axial fan (∅1690 mm) and duct type testing facilities were fabricated. The purpose of fabricating testing equipment was testing an uncertainty measurement under the controlled environments.

• Preventive Nutrition and Food Science
• /
• v.9 no.1
• /
• pp.58-64
• /
• 2004

This study investigated the effects of carnitine and/or ${\gamma}$ -aminobutyric acid (GABA) supplementation on lipid profiles and some immune related nutrient in mice. Balb/c male mice were orally treated with either an AIN-76 diet (Con), a control diet plus carnitine (CS, 0.5 g/kg bw), a control diet plus GABA (GS, 0.5 g/kg bw) or a control diet plus carnitine plus GABA (CGS, 0.25 g/kg bw, respectively) for 6 weeks. There were no significant differences in feed consumption, energy intake, body weight gain or feed efficiency ratio among the groups during the experimental period. However, abdominal fat deposits were smaller in CS, GS and CGS groups compared with the Con group. Serum and liver triglycerides also were lower in CS, GS and CGS and serum total cholesterol was significantly lower in the CGS group compared with the Con group. Serum LDL cholesterol was lower in the CGS group and liver HDL cholesterol was significantly higher in the CS group compared with Con group. In serum, stearic acid and selecholeic acid were lower, but arachidic acid was higher in the CS group. Liver stearic acid was higher but oleic acid lower in CGS group compared with Con group. In carnitine supplemented groups, serum and liver nonesterified carnitine (NEC), acidsoluble acylcarnitine (ASAC), total carnitine (TCNE) concentrations were higher in only the CS group, not CGS group. Serum vitamin A and E concentrations were not different among the groups. These results may suggest that carnitine and/or GABA supplementation improves lipid profiles in mice, but did not affect the immune-related nutrients that we measured under the experimental conditions of this study.

• Environmental Engineering Research
• /
• v.25 no.4
• /
• pp.571-578
• /
• 2020

In this work, a detailed study on the electrochemical degradation of an azo dye, Orange G is performed using a platinum electrode. Indeed, the influence of the dye concentration (50-150 mg/L), the pH of the medium and the density of the electric current is studied on the rate of discoloration, the rate of mineralization, the efficiency of the electric current and the energy consumption. The UV-visible spectra of OG plotted against the degradation time show the decrease of the intensity of the characteristic dye peaks. In an environment rich in chlorides, all peaks disappear after 15 min of degradation. However, the peaks at wavelengths of 200 and 290 nm appeared after one hour of treatment. In K₂SO₄, the eliminated percentages are respectively 46, 54 and 61% for wavelengths of 245, 330 and 480 nm. This suggests that the degradation mechanisms in K₂SO₄ and KCl environments are not the same. In the middle rich in chlorides, the eliminated percentage of OG did not seem to be affected by the concentrations increase. These results confirm the hypothesis that electrochemical oxidation process is very favorable for concentrated pollutants discharge.

• Journal of Biosystems Engineering
• /
• v.41 no.3
• /
• pp.177-183
• /
• 2016

Purpose: Mee (Madhuca longifolia) is an economically important tree growing throughout Sri Lanka. Its importance is mainly attributed to its oil with high nutritional and medicinal values. However, an inefficient extraction method limits its use. This study revealed the possibility of extracting oil from mee seeds by using a screw-type oil expeller. Methods: A popular screw-type oil expeller was used in the experiment. Extract bar clearance and speeds of the main spiral shaft were altered to increase the oil expelling efficiency of the machine. The quality of refined oil at the optimum oil yield was determined by measuring the refractive index, saponification value, iodine value, unsaponifiable matter, free fatty acid, and specific gravity. Results: An optimum yield of 35% oil was obtained when the machine capacity was 30 kg/h and energy consumption was 0.13 kWh/kg. This optimum machine condition was observed at an extract bar clearance of 0.5 mm and a main spiral shaft speed of 90 rpm. The refractive index, saponification value, iodine value, unsaponifiable matter, free fatty acid, and specific gravity of the oil were 1.4, 203, 59, 3.5%, 0.2%, and 0.907 g/cm3 respectively. Color of the mee oil was closer to yellow, which is revealed by the lightness value (L) of 24.93 and positive value (b) of 11.81. Conclusion: The screw-type oil expeller can be used for economically extracting mee oil on a commercial scale.

• Applied Chemistry for Engineering
• /
• v.20 no.2
• /
• pp.126-133
• /
• 2009

The surfactants applied in household detergents and industrial cleansers should satisfy the requirement of not just the basic function such as emulsification, solubilisation, dispersion, detergency, wetting and foaming, but also the economical efficiency and the safety to human and environment. In the viewpoint of the sustainable development, the surfactants, moreover, have to reduce raw materials and energy consumption and waste disposal when they are being manufactured and also consumed for their purposes. New high-performance surfactants have been extensively studied and developed in order to respond the change in social and economical environment. Noticeable progresses have been achieved so far, which are the significant increase in solubility and surface activity through the minor modification of existing surfactant molecular structure and the synergistic increase in a surface activity shown in the mixed surfactant system of anionic and cationic surfactants. In this review, the important and meaningful progresses achieved recently in technological advance and practical application will be summarized and discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.283-283
• /
• 2011

The n-doping effect by doping metal carbonate into an electron-injecting organic layer can improve the device performance by the balanced carrier injection because an electron ohmic contact between cathode and an electron-transporting layer, for example, a high current density, a high efficiency, a high luminance, and a low power consumption. In the study, first, we investigated an electron-ohmic property of electron-only device, which has a ITO/$Rb_2CO_3$-doped $C_{60}$/Al structure. Second, we examined the I-V-L characteristics of all-ohmic OLEDs, which are glass/ITO/$MoO_x$-doped NPB (25%, 5 nm)/NPB (63 nm)/$Alq_3$ (32 nm)/$Rb_2CO_3$-doped $C_{60}$(y%, 10 nm)/Al. The $MoO_x$doped NPB and $Rb_2CO_3$-doped fullerene layer were used as the hole-ohmic contact and electron-ohmic contact layer in all-ohmic OLEDs, respectively, Third, the electronic structure of the $Rb_2CO_3$-doped $C_{60}$-doped interfaces were investigated by analyzing photoemission properties, such as x-ray photoemission spectroscopy (XPS), Ultraviolet Photoemission spectroscopy (UPS), and Near-edge x-ray absorption fine structure (NEXAFS) spectroscopy, as a doping concentration at the interfaces of $Rb_2CO_3$-doped fullerene are changed. Finally, the correlation between the device performance in all ohmic devices and the interfacial property of the $Rb_2CO_3$-doped $C_{60}$ thin film was discussed with an energy band diagram.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.4
• /
• pp.347-355
• /
• 2016

In this study, a new designed propeller was applied on 24 ton class squid jigging vessel to reduce of fuel consumption. The selected squid jigging boat was under construction at the shipyard to determine the resistance of the hull through the model experiment. The propeller design was carried out by using the experimental data and ITTC procedures. Sea trials were performed by measuring the speed and the horsepower required by the condition of five power levels of engine load, namely 70%, 80%, 90%, MCR and maximum engine power. The speed and delivered horse power were compared between the conventional propeller and the new design propeller. Delivered horse power by installing the new propeller takes 90% engine load at start-up conducted by decreased 9.06%. The measuring speed is increased up to the 0.6 knots in the low-speed range to high range. This study showed that only the design and installation of a new propeller can improve the propulsion efficiency of the boats; furthermore, reduce fuel costs can be achieved at the same time by improving the increased cruising speed.

• Applied Chemistry for Engineering
• /
• v.19 no.2
• /
• pp.179-184
• /
• 2008

The separation and purification of succinate are necessary for the succinic acid production by a fermentation process. Among the purification processes, desalination of succinate is inevitable. In this work, electrodialysis was selected as a desalination method and its operating parameters affecting the degree of desalination and energy consumption were examined. Commercialized electrodialysis apparatus was used in this work and its optimum operating parameters were determined by using design of experiment (DOE) method. Voltage, concentration of succinate, and pH were selected as main parameters. Among them, voltage seemed to be the most important one. The final conversion of succinate to succinic acid was calculated when the operating parameters were optimized. Finally, the effect of impurities, such as corn steep oil, yeast extract, and dextrose on the electrodialysis efficiency was also studied.