• 한국수소및신에너지학회논문집
• /
• 제22권4호
• /
• pp.443-450
• /
• 2011

The three-reactor chemical-looping process (TRCL) for the production of hydrogen from natural gas is attractive for both $CO_2$ capture and hydrogen production. In this study, redox property of $Fe_2O_3$ and $WO_3$ supported with $ZrO_2$ and $MgAl_2O_4$ were studied with temperature programmed oxidation/reduction (TPO/R) experiment. All metal oxides were prepared by ball mill method. Metal oxides supported with $ZrO_2$ showed the good redox property in TPO and TPR tests. Reduction behavior was matched well the theoretical reduction mechanism. Metal oxides supported with $MgAl_2O_4$ formed a solid solution ($MgFe_{0.6}Al_{1.4}O_4$, $MgWO_4$). $Fe_2O_3$ showed more narrow reaction range and lower reaction temperature than $WO_3$.

• 공업화학
• /
• 제21권2호
• /
• pp.129-136
• /
• 2010

이온성 액체는 휘발성이 거의 없고, 열적 안정성이 높으며, 탄화수소화물에 잘 섞이지 않고, 다양한 무기 및 유기금속 화합물을 쉽게 용해시킬 뿐만 아니라 전기전도도가 높고 산도와 염기도를 용이하게 조절할 수 있는 등 독특한 물리화학적 성질로 인하여 청정용매, 촉매, 분리, 전해질, 바이오 분야에서 다양하게 응용되고 있다. 본 총설에서는 이온성 액체에 대한 기본지식과 함께 현재 이온성 액체를 응용한 상용화 예를 포함하여 이온성 액체의 다양한 활용분야, 특히 $CO_{2}$ 흡수 및 전환분야에 대한 최근 연구 동향을 기술하였다.

• KEPCO Journal on Electric Power and Energy
• /
• 제5권4호
• /
• pp.337-341
• /
• 2019

In this study, the effects of two materials, active alumina and CaO based inorganic binder, which cause the side reaction on the K₂CO₃-based solid CO₂ sorbents was investigated. K₂CO₃-based solid sorbents called KAM series was prepared by spray drying method and then measured its physical properties and CO₂ sorption capacity. Among the KAM series sorbents, KAM(0.5) maintained high CO₂ sorption capacity of 7.6 wt% after 3 cycle of sorption/regeneration reaction and showed very low attrition loss as low as 3.1 % which was measured by ASTM D5757-95.

• 대한환경공학회지
• /
• 제35권5호
• /
• pp.307-311
• /
• 2013

대기 중 $CO_2$ 포집 기술은 비점오염원 배출 $CO_2$를 포집할 수 있는 유일한 기술 중 하나이다. 본 논문에서는 저농도 $CO_2$를 이용한 흡착 실험을 수행하였다. 세 종류의 흡착제를 이용한 흡착과 열재생을 반복하는 실험을 수행한 결과 제올라이트 5A, 13X 그리고 활성탄의 $CO_2$ 흡착량은 21 mg/g, 12 mg/g 그리고 6 mg/g으로 나타났으며, 열재생 반복실험 결과에서 제올라이트 5A가 가장 우수한 흡착 성능을 보여주었다.

• Journal of Ecology and Environment
• /
• 제33권2호
• /
• pp.149-155
• /
• 2010

This study was conducted to investigate the feeding efficiency of the cattle egret (Bubulcus ibis) and the intermediate egret (Ardea intermedia) in relation to the stage of rice culture during two breeding seasons, 2006 and 2007, in Asan city, Chungcheongnam-do, South Korea. Cattle egrets caught mainly small invertebrate prey (insects and spiders, 98.4%) during all stages of rice cultivation, and had a higher prey capture rate in the plowing stage (14.98 prey/min) than in other stages (2.82-3.51 prey/min). Therefore, the biomass intake rate of cattle egrets was highest in the plowing stage. The intermediate egret captured both loaches (43.4%) and small invertebrates (50.6%). The prey capture rates of intermediate egrets increased gradually from the flooding stage (0.38 prey/min) to the planting stage (1.09 prey/min), and decreased in the growing stage (1.04 prey/min). However, intermediate egrets had the highest biomass intake rates in the plowing stage because more loaches were caught in the plowing stage (0.54 loaches/min) than other stages (0.23-0.36 loaches/min). Consequently, both intermediate egrets and cattle egrets had high energy intakes in the plowing stage and rice fields provided an important feeding habitat for both species.

• 설비공학논문집
• /
• 제26권11호
• /
• pp.535-540
• /
• 2014

This paper investigates the exhaust effectiveness of smoke, in the case of fire in a large atrium space. Numerical analysis was conducted to simulate transient fire growth in a test room, modeled by the Murcia atrium fire test. Various indices representing the exhaust performance of the exhaust system were obtained, such as the height of the smoke layer, and the instantaneous and accumulative capture efficiency of the smoke. The residual life time of smoke from the fire was also obtained, by injecting tracer gases at the fire location, depending on the airflow rate, and the location of the exhausts. The capture efficiency based on smoke concentration at the exhausts exhibits how much smoke can be removed by the exhaust system; whereas, the exhaust effectiveness based on residual life time indicates how rapidly the smoke can reach the exhaust locations, before being exhausted. The definitions and meanings of the indices to be used in representing the exhaust performance of a smoke exhaust system installed in a large space are discussed.

• Bulletin of the Korean Chemical Society
• /
• 제33권11호
• /
• pp.3749-3754
• /
• 2012

Nanoporous carbons with a high specific surface area were prepared directly from thermoplastic acrylic resin as carbon precursor and MgO powder as template by carbonization over the temperature range, $500-1000^{\circ}C$. The effect of the carbonization temperature on the pore structure and $CO_2$ adsorption capacity of the obtained porous carbon was examined. The textural properties and morphology of the porous carbon materials were analyzed by $N_2/-196^{\circ}C$ and $CO_2/0^{\circ}C$ adsorption/desorption isotherms, SEM and TEM. The $CO_2$ adsorption capacity of the prepared porous carbon was measured at $25^{\circ}C$ and 1 bar and 30 bar. The specific surface area increased from 237 to $1251m^2/g$, and the total pore volumes increased from 0.242 to $0.763cm^3/g$ with increasing the carbonization temperature. The carbonization temperature acts mainly by generating large narrow micropores and mesopores with an average pore size dependent on the level of carbonization of the MgO-templated nanoporous carbons. The results showed that the MgO-templated nanoporous carbons at $900^{\circ}C$ exhibited the best $CO_2$ adsorption value of 194 mg/g at 1 bar.

• 한국분무공학회지
• /
• 제17권1호
• /
• pp.14-19
• /
• 2012

The present study conducts experimental investigation on spreading and deposition characteristics of a $4.3{\mu}l$ de-ionized (DI) water droplet impacting upon aluminum (Al 6061) flat and textured surfaces. The micro-textured surface consisted the micro-hole arrays (hole diameter: $125{\mu}m$, hole depth: $125{\mu}m$) fabricated by the conventional micro-computer numerical control (${\mu}$-CNC) milling machine process. We examined the surface effect of texture area fraction ${\varphi}_s$ ranging from 0 to 0.57 and impact velocity of droplet ranging from 0.40 m/s to 1.45 m/s on spreading and deposition characteristics from captured images. We used a high-speed camera to capture sequential images for investigate spreading characteristics and the image sensor to capture image of final equilibrium deposition droplet for analyze spreading diameter and contact angle. We found that the deposition droplet on textured surfaces have different wetting states. When the impact velocity is low, the non-wetting state partially exists, whereas over 0.64 m/s of impact velocity, totally wetting state is more prominent due to the increase kinetic energy of impinging droplet.

• 방사성폐기물학회지
• /
• 제21권2호
• /
• pp.205-224
• /
• 2023

The emission of off-gas streams from used fuel recycling is a concern in nuclear energy usage as they contain radioactive compounds, such as, ³H, ¹⁴C, ⁸⁵Kr, ¹³¹I, and ¹²⁹I that can be harmful to human health and environment. Radioactive iodine, ¹²⁹I, is particularly troublesome as it has a half-life of more than 15 million years and is prone to accumulate in human thyroid glands. Organic iodides are hazardous even at very low concentrations, and hence the capture of ¹²⁹I is extremely important. Dynamic adsorption experiments were conducted to determine the efficiency of sodium mordenite, partially exchanged silver mordenite, and fully exchanged silver mordenite for the removal of methyl iodide present at parts per billion concentrations in a simulated off-gas stream. Kinetic analysis of the system was conducted incorporating the effects of diffusion and mass transfer. The possible reaction mechanism is postulated and the order of the reaction and the values of the rate constants were determined from the experimental data. Adsorbent characterization is performed to investigate the nature of the adsorbent before and after iodine loading. This paper will offer a comprehensive understanding of the methyl iodide behavior when in contact with the mordenites.

• 한국해양환경ㆍ에너지학회지
• /
• 제19권1호
• /
• pp.52-61
• /
• 2016

대용량의 $CO_2$를 지중에 저장하기 위한 CCS(Carbon Capture and Storage)는 고압의 파이프라인 수송공정을 수반한다. 또한, 사고 및 유지보수와 같은 비정상상태가 발생할 경우 고압의 $CO_2$를 대기 중으로 방출시키는 감압공정이 필요하다. 본 연구에서는 고압 $CO_2$ 파이프라인에서의 감압현상을 수치해석적 방법을 이용하여 분석하였다. 수치계산 결과를 실험데이터와 비교분석함으로써 수치해석의 예측 능력을 검증하였다. 수치모델이 기체-액체 혼합 구간에서의 2상 감압현상을 잘 예측하였다. 그러나 초임계 액체 단상 감압과 기체 단상 감압현상에 대해서는 온도변화 등을 예측하는데 한계가 있음을 밝혔다.