• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.11 no.5
• /
• pp.1-6
• /
• 2002

This study is to investigate the characteristics of the surface around a hole on inlet and outlet of product which are manufactured by face mill or end mill cutting with a hole or a pocket in its surface. Furthermore, experiments for optimization of process conditions to minimize the change of characteristics of milling cut surface after a hole cutting operation are implemented. This result is apply to manufacture of mold products and metal products by diecasting.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.393-396
• /
• 2000

본 연구에서는 필렛엔드밀을 이용하여 복합곡면을 가공하기 위한 새로운 접근방법을 제안한다. 이 방법은 "곡선기반 접근방법"으로 기존의 "점기반 접근방법"에 비하여 몇 가지 특징들을 가지고 있다. 본 연구에서는 다면체로 표현된 곡면을 대상으로 하고 있는데, 볼록한 모서리와 꼭지점에서는 정확히 옵셋시키고 오목한 부위에서는 옵셋 곡면이 겹치는 것을 허용한다. 옵셋된 곡면을 절단 평면으로 자르고, 같은 평면상에 있는 교선 중에서 겹치는 부분의 윗 부분을 택하면 공구 간섭이 제거된 공구 경로를 얻게된다. 즉 계산이 복잡한 오목지역에서의 옵셋 시 발생되는 간섭을 2차원 평면상에서 제거함으로써 계산 과정을 단순화시키고 안정적으로 만든다. 본 연구에서 제안한 방법은 PC에서 VC++로 구현되었으며 몇 가지 적용 예를 보여 주고 있다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.265-265
• /
• 2004

최근 IT산업으로 대표되는 광통신 및 광신호 전달에 이용되는 광 반사경 및 렌즈어레이, 광가이드 판넬(BLU, FLU)등 광부품의 수요가 급증하고 있고, 이의 생산을 위한 다양한 제조공정이 연구 개발되고 있다 근년까지 이러한 마이크로 광부품의 제조방법은 포토리소그래피, 에칭기술을 베이스로 한 MEMS 기술, PDMS를 이용한 복재기술에 크게 의존하고 있다. 기계적 가공법으로는 오래전부터 초정밀 경면 선삭이나 연삭에 의한 마이크로 렌즈와 미세 패턴의 금형가공이 이루어져 왔다.(중략)

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.1
• /
• pp.33-40
• /
• 2010

In this research, the effects for surface Improvement of plasma ion implanted carbide endmill tools were observed by measuring cutting forces and tools wear affecting surface roughness in high speed cutting. From the 2nd ion mass analysis, the oxidation layer was found to be built up by sputtering. The residual gas contamination of oxygen was found to be contained impurities in nitrogen gas. The plasma implanted ion was found to be spreaded, especially the nitrogen was implanted up to 150nm depth as impressed voltage and ion implanting time. It is analyzed as bring surface improvement by spreading deeply forming oxidation on surface. The factors in Analysis of Variance(ANOVA) about mutuality cause reference of cutting force. The cutting force Fx is affected by the interaction of spindle rpm and federate, the cutting force Fy is influenced by spindle rpm and time injected ion, and cutting force Fz is affected by the interaction of impressed voltage and feedrate. Also, it was found that the cutting forces of implanted tools become lower and the surface roughness is improved by the effect of nitrogen according to the implantation.

• Journal of the Korean Society of Safety
• /
• v.24 no.2
• /
• pp.7-12
• /
• 2009

The machining process of ceramics can be characterized by cracking and brittle fracture. In the machining of ceramics, edge chipping and crack propagation are the principal reasons to cause surface integrity deterioration. Such phenomenon can cause not only poor dimensional and geometric accuracy, but also possible failure of the ceramic parts. Thus, traditional ceramics are very difficult-to-cut materials. Generally, ceramics are machined using conventional method such as grinding and polishing. However these processes are generally costly and have low MRR(material removal rate). To overcome such problems, in this paper, h-BN powder, which gives good cutting property, is added for the fabrication of machinable ceramics by volume of 10 and 15%. The purpose of this study is an analysis of endmill's rake angle for appropriate tools design and manufacturing for the machinable ceramics. In this study, Experimental works are executed to measure cutting force, surface roughness, tool fracture, on different axial rake angle of endmills. Cutting parameters, namely, feed, cutting speed and depth of cut are used to accomplish purpose of this paper. Required experiments are performed, and the results are investigated.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.1
• /
• pp.81-86
• /
• 2010

This paper investigated into process characteristics of AlTiN coated layers for machining to the direction of upper and lower in plastic mold material (KP-4) with the cemented carbide ball endmill with the diameter of 8mm coated AlTiN layers (1~4) step by step using machining center. The material used in experiments was KP-4 that was machined by three types of inclined angles; $15^{\circ}$, $30^{\circ}$ and $45^{\circ}$ As estimated mechanical properties of AlTiN coated layers, it was shown the most result in the condition of three layered coating that the coating that the coating depth, the hardness of the coated layer and the surface roughness of the coated layer were $13{\mu}m$, Hv 3027.3 and $0.042{\mu}m$, respectively. The cutting component was better at the condition of upper direction than that of lower direction in all experimental conditions and indicated to be less which the bigger angle of the material was increased the effective diameter of the tool.

• Design & Manufacturing
• /
• v.17 no.1
• /
• pp.33-39
• /
• 2023

The ball end mill is a type of cutting tool that is widely used to process complex mold shapes including aspheric surfaces. Unlike the flat end mill in which the cutting edge is formed on the cylindrical handle, the cutting edge is formed from the cylindrical handle to the hemispherical shape, which is advantageous for processing curved shapes. However, since the cutting speed continuously changes during machining due to the helix angle of the cutting edge or the machining inclination angle, it is difficult to obtain a precise machined surface. Therefore, in this paper, machining was performed while changing the helix angle of the ball end mill and the angle of the machining slope under the same cutting conditions for STD 11 material, which is widely used as a mold material. Through this, the effect of the two variables on the roughness of the machined surface was analyzed. As a result, if the helix angle was 0 degrees, it showed the best surface roughness of Ra. 0.16 ㎛. When the helix angle was 20 degrees, the best surface roughness of Ra. 0.18 ㎛ was occurred.