• International Journal of Precision Engineering and Manufacturing
• /
• 제4권4호
• /
• pp.19-24
• /
• 2003

In end milling process, which is characterized by the use of a rotating tool, the undeformed chip thickness varies periodically with phase change of the tool. Although many efforts have concentrated on the study of end milling process, the analysis of shear and chip-tool friction behaviors has not been reported. Recently, a model has been proposed to simulate the shear and friction characteristics of an up-end milling process in terms of the equivalent oblique cutting. In the current study, the varying undeformed chip thickness and the cutting forces in a down-end milling process are replaced with the equivalent ones of oblique cutting. Then it is possible to simulate the shear and the chip-tool friction characteristics of a down-end milling process. The proposed model has been verified through two sets of cutting tests i.e., down-end milling and the equivalent oblique cutting tests. The experimental results show that the proposed model is suitable to analyze the shear and chip-tool frictional characteristics of down-end milling process. The specific cutting energy decreases with increase in equivalent undeformed chip thickness in a down-end milling process.

• 한국의류학회지
• /
• 제30권1호
• /
• pp.12-19
• /
• 2006

This study was administered to identify features of masstiege high-end products by comparing to original old high-end products. For this purpose, the differences in shopping orientation between each consumer groups by product types(high-end products, original old high-end products) preferred were examined. 300 female consumers were surveyed and 279 data were used for analysis. The results are as follows. First, three elements(efficiency, enjoyment, convenience) of shopping orientation were constructed by factor analysis and efficiency element of all elements had highest explanation power. The differences in shopping orientation between masstiege high-end products and original old high-end products were identified by t-test. The consumers preferring original old high-end products regarded convenience element as an important factor and the consumers preferring masstiege high-end products considered efficiency element more. The correlation analysis between shopping orientation factors and demographic characteristics were administered. The consumers who were of low age, low education, low income and unmarried pursued efficiency more, the consumers who were unmarried, of high education and high income showed to pursue enjoyment more, and the consumers who were of high age, high education, high income and married considered convenience element more. Finally marketing strategies for masstiege brands were suggested.

• Journal of Yeungnam Medical Science
• /
• 제3권1호
• /
• pp.237-241
• /
• 1986

본 교실에서 백서의 대퇴동맥을 이용하여 혈관감자의 회전없이 continuous suture로 미세혈관 문합을 시행해본 결과 다음과 같은 결론을 얻었다. end-to-end anastomosis시 double c1app의 회전이 어려울 정도로 작업공간이 제한된 경우나 end-to-side anastomosis시 secondary Vessel의 길이가 짧아서 후벽을 잘 볼 수 없는 경우에 continuous suture을 이용하면 Back wall을 완전히 노출시킨 상태에서 쉽게 혈관 문합을 시행할 수 있으며 문합시간도 단축시킬 수 있을 것으로 사료된다.

• Journal of Astronomy and Space Sciences
• /
• 제24권1호
• /
• pp.69-78
• /
• 2007

Earth-Sun-Heliosphere Interactions Experiments(EARTHSHINE) 미션의 주 탑재체인 Albedo Monitor and Radiometer(Amon-Ra) 광학계는 최초로 제1 라그랑제 지점(Lagrange point 1) 주위의 혜일로(Halo) 궤도에 위치하여 태양 복사 활동 및 지구 반사율 변화를 1% 정확도 이내로 측정함으로서 현존하는 지구 반사율 추이의 모순을 해결할 수 있는 과학적 측정 자료를 제시하는데 그 목적을 가지고 있다. 이에 이미 개발된 광학 성능 검증용 Amon-Ra 광학계의 가시광채널 시험 모델 및 광선 추적 기법을 이용한 통합적 광선 추적 end-to-end 과학 임무 성능 평가 수치 모사 기법을 확립하였으며, 개발된 기법을 이용하여 실제 제작된 Amon-Ra 광학계를 제1라그랑제 지점에 위치시키고 태양과 지구 밝기를 다양하게 변화시킨 후 광학계에 입사되는 에너지 복사량을 수치 모사로 측정하였다. 관측된 지구 및 태양 밝기로부터 지구 반사율 변환을 위하여 각 분포 모델(GLobal Angular Distribution Model, ADM)을 이용하였으며 수치 모사에 의한 지구 반사율 측정 결과를 Amon-Ra 광학계의 측정 오차 범위인 ${\pm}0.28%$와 비교함으로서 개발된 end-to-end 성능 검증 기법의 계산 정밀도를 확인하였다. 이는 기존의 광학계 성능 검증법의 한계를 뛰어넘어 광학계 성능 평가를 실시간으로 검증할 수 있다는 점에서 큰 의의를 지닌다.

• 정보보호학회논문지
• /
• 제24권4호
• /
• pp.625-634
• /
• 2014

전술통신망은 이기종 다양한 특성의 통신장비로 구성된 네트워크가 복합적으로 운용되고 있다. 이러한 구성으로 인해 종단간 통신을 위해 기종별 데이터 포맷으로 변환하기 위한 망연동 게이트웨이를 적용하고 통신 정보보호를 위해 네트워크별 암호기술이 적용되고 있다. 이는 이기종 망간 암호화된 데이터를 직접 전송할 수 없고 통신데이터의 재가공 및 처리지연의 문제점이 있다. 서로 다른 전술통신망 사이에 위치하는 망연동 게이트웨이에서 통신데이터에 대한 재가공과 암호화 데이터에 대한 복호화 및 재암호화가 요구된다. 본 논문에서는 전술통신망에서 이기종간 종단간 암호화 통신을 위한 통신방식을 제안한다. 제안한 방식을 이용하여 PSTN과 UHF 통신망간 게이트웨이에서 재가공, 재암호화, 전송 지연요소 등을 없애 실시간 음성 및 데이터 통신을 가능하게 한다. 또한, 종단간 정보보호를 위해 단대단 정보보호방식을 적용한다. 이를 통신망에 적용하여 기존 방식 대비 제안한 방식의 성능을 비교 분석한다. 제안한 방식은 기존방식의 문제점을 해결하고 이기종 전술통신망간 종단간 암호화 통신이 가능함을 확인하였다.

• 한국기계가공학회지
• /
• 제20권1호
• /
• pp.57-65
• /
• 2021

With the increased utilization of CAM programs, end-mill processing is most commonly used for machining and metal processing. In particular, hole or shaft machining has high assembly precision, which inevitably leads to high utilization of end mills. However, the analysis of quality characteristics according to the process conditions of end mills is not performed systematically at the site, causing poor quality and productivity. The most influential factor of quality is the runout of the end mill. In this paper, the number of turns of the end mill, number of tool blades, cutting direction, and artificial runout volume were determined to identify the correlation between the epicenter, cylindricality, and surface roughness. Two types of end mills, three levels of runout, three levels of rotational speed, and two cutting directions were considered and 36 rounds of hole processing were conducted. For the analysis of shape characteristics according to the set process variables, the experimental planning method was applied to the measured specimen and the processing characteristics were analyzed according to the runout of the end mill through correlation analysis.

• Journal of Hospice and Palliative Care
• /
• 제23권3호
• /
• pp.139-150
• /
• 2020

Purpose: The purpose of this study was to investigate the levels of end-of-life care competency; knowledge, attitudes, and experiences regarding advance directives; perceptions of good death; and end-of-life care obstacles and supportive behaviors among tertiary care nurses. Methods: The participants were 150 nurses at a tertiary hospital in Jinju, Korea. The data collected using a questionnaire were analyzed using descriptive statistics, the t-test, analysis of variance, Pearson correlation coefficients, and stepwise multiple regression in SPSS for Windows version 24.0. Results: The mean (±SD) score of end-of-life care competency was 3.63 (±0.53) on a 5-point scale. A significant difference in end-of-life care competency was found according to whether nurses had experienced the death of a family member or acquaintance (P=0.029). According to stepwise multiple regression analysis, the factors affecting end-of-life care competency were the frequency of end-of-life care supportive behaviors (β=0.38, P<0.001), experience with advance directives (β=0.29, P<0.001), and marriage (β=0.15, P=0.039). This model had an explanatory power of 27.9% (F=18.87, P<0.001). Conclusion: In order to improve nurses' end-of-life care competency, it is important to strengthen end-of-life care supportive behaviors by exposing nurses to those behaviors and providing frequent experience with advance directives.

• Design & Manufacturing
• /
• 제13권3호
• /
• pp.19-23
• /
• 2019

In the mold industry, CAM software has been introduced to solve the impossible or time-consuming part of the mold industry because the increase in labor costs, the drop in mold price, and the short delivery time are tasks to be solved not only in the manufacturing industry but also in the mold industry as a whole. In order to reduce the processing time and improve the surface roughness, we have been conducting various researches for efficient machining. This study was carried out to compare the ball end mill and radius end mill tools with the Power mill software and NC brain software under the same conditions and to find out the most efficient method of machining the smooth drafting surface and improving the surface roughness. (1) By machining the smooth drafting surface using radius end mill, the machining time is 23.7% faster than when using ball end mill. (2) Surface roughness when machined with radius end mill is smoother than when using ball end mill. Based on these results, it can not be applied to all shapes, but if it is a relatively wide and simple gradient shape, the raster machining method using radius end mill can be more effective in terms of delivery and quality than machining with ball end mill.

• 가정간호학회지
• /
• 제29권2호
• /
• pp.143-152
• /
• 2022

Purpose: This study aims to describe and explore the experiences of visiting nurses so as to providing high-quality end-of-life care at home. Methods: Data was collected and recorded through in-depth interviews with 11 visiting nurses and transcribed verbatim. The data were analyzed with qualitative contents analysis. Data were collected from April 8 to July 30, 2021. Results: The results revealed the following four themes and ten sub-themes: The main themes were 'Dignified end-of-life caring practice at home', 'Providing integrated support of end-of-life family caregivers', 'Confronting the limits of visiting nursing at the end of life' and 'Reflection on life and feeling rewarded'. Visiting nurses have performed dignified end-of-life care at home and integrated support for family caregivers. Although the visiting nurse sometimes faced the limits of visiting nursing during end-of-life care, it was surveyed that they rewarded on their lives and felt rewarding through the end-of-life nursing experience. Conclusion: Practical and systematic training is needed to positively change the end-of-life care of visiting nurses. We propose programs, such as expert counseling, to improve coping skills in end-of-life care practice at home. Additionally, we propose various institutional supports which can support the limitations of end-of-life care provision.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.399-406
• /
• 2001

This study describes the geometric characteristic and the 5-axis machining method of end mill body with insert tip. The geometry of end mill body is consisted of the flute part and the insert tip part. Thus, this study defines the flute part as ruled surface with constant helix angle and the insert tip part as rectangular plane on general direction. The geometric algorithm and the 5-axis NC part program were calculated by our programmed software and a sampled end mill body was machined on 5-axis machining center equipped with two index tables. The machined end mill body with insert tip was very agreeable to the designed end mill body with insert tip. Thus, the method proposed in this study may be very useful for the machining of end mill body with insert tip.