• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.6
• /
• pp.70-75
• /
• 2021

Recently, several efforts have been made to improve the thermal efficiency of a refrigerant compressor. In this study, we attempted to improve energy efficiency ratio (EER) performance by reducing the superheat of the linear compressor. To this end, heat generated inside the compressor must be effectively dissipated. Therefore, heat dissipation was improved by processing ribs in the gap-flow region generated owing to the vibration of the compressor body. The results showed that the convective heat transfer coefficient becomes significantly high when ribs are used, increasing the heat dissipation rate. This helps improve EER by reducing the superheat of the compressor.

• Progress in Superconductivity and Cryogenics
• /
• v.7 no.3
• /
• pp.39-42
• /
• 2005

In this paper, the thermal characteristics of multilayer insulation (MLI) were experimentally investigated by using boil-off calorimetry method for seeking optimum standards of thermal insulation conditions. It is necessary to design the thermal insulating efficiency for applying to cryogenic instruments such as HTS power cable system. It is well known that the thermal characteristics and heat transfer of MLI are greatly affected by various MLI structures such as the number of layers and layer density, etc. However, it is difficult to know the thermal characteristics of MLI correctly. The heat leak by MLI between room temperature and liquid nitrogen temperature was measured at various conditions using a cylindrical cryostat. The cryostat consists of two guard vessels located at both end sides and a test vessel between them. The guard vessels are also filled with liquid nitrogen to prevent radiation heat leak through the both end side of the cylindrical test vessel to measure the heat leak only through MLI.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.4
• /
• pp.82-87
• /
• 1999

The Asynchronous Transfer Mode(ATM) networks are being adopted as backbones over various parts of Internet. TCP is one of the most widespread transport protocols and can be used with ATM. But, TCP shows poor end-to-end performance on ATM networks. Effective throughput of TCP over ATM can be quite low when cells are dropped at the congested ATM switch. As congested link transmits cells from corrupted packets, it wastes bandwidth and throughput becomes low. This paper examines the behavior of TCP over ATM-UBR using EPD switch in a broadband environment. As threshold value closes to the buffer size, the buffer can be used more efficiently, but more drops and retransmission occur. If the threshold value is much less than buffer size, efficiency becomes low, but few drops can be happen. Therefore, the decision of threshold value becomes important factor.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.2
• /
• pp.134-139
• /
• 2017

In this study, an inductive power transfer (IPT) charger for electric vehicles is proposed to improve the entire system efficiency and power density by eliminating the DC-DC converter in the secondary side. In the proposed IPT charger, the DC-link voltage is adjusted according to the coupling coefficient through cascade buck-boost converter in the front-end side, and the bridgeless rectifier performs the charging of battery. The control algorithm for the proposed IPT system is theoretically explained, and the validity of the proposed system is verified by informative simulation.

• The KIPS Transactions:PartC
• /
• v.18C no.4
• /
• pp.265-278
• /
• 2011

The objective of this paper is to analyze and characterize end-to-end packet statistics after modeling and simulation of WiFi (IEEE 802.11g) and WiMAX (IEEE 802.16e) of a virtual wireless network using OPNET Modeler Wireless Suite. Wireless internal and external network simulators such as Remcom's Wireless InSite Real Time (RT) module, WinProp: W-LAN/Fixed WiMAX/Mobile WiMAX, and SMI system, are designed to consider data transfer rate based on wireless propagation signal strength. However, we approached our research in a different perspective without support for characteristic of these wireless network simulators. That is, we will discuss the purpose of a visual analysis for these packets, how to receive each point packets (e.g., wireless user, base station or access point, and http server) through end-to-end virtual network modeling based on integrated wired and wireless network without wireless propagation signal strength. Measuring packet statistics is important in QoS metric analysis among wireless network performance metrics. Clear packet statistics is an especially essential metric in guaranteeing QoS for WiMAX users. We have found some interesting results through modeling and simulation for virtual wireless network using OPNET Modeler Wireless Suite. We are also able to analyze multi-view efficiency through experiment/observation result.

• The Journal of the Korea Contents Association
• /
• v.8 no.6
• /
• pp.34-42
• /
• 2008

MAC(Medium Access Control) is demanded to provide end-to-end QoS(Quality of Service) for a variety of traffic in the wireless networks. When all the traffic is integrated in the channel, the main difficulty of the MAC protocol is how to efficiently support multi-class traffic in the limited bandwidth wireless channel. In this paper, we proposed the dynamic bandwidth slot method for improving QoS of the real time traffics. In this paper, we used in-band scheme to send dynamic parameter and considering buffer size and delay variation, we enabled 2 state bits to send to base station in mobile station. The proposed algorithm is to guarantee QoS of real time traffic and maximize transfer efficiency in wireless networks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.12
• /
• pp.5928-5947
• /
• 2019

Multicast Mesh based Mobile Ad-hoc NETworks (MANETs) provide efficient data transmission in energy restraint areas without a fixed infrastructure. In this paper, the authors present an improved version of protocol SLIMMER developed by them earlier, and name it SLIMMER-SN. Most mesh-based protocols suffer from redundancy; however, the proposed protocol controls redundancy through the concept of forwarding nodes. The proposed protocol uses remaining energy of a node to decide its energy efficiency. For measuring stability, a new metric called Stability of Node (SN) has been introduced which depends on transmission range, node density and node velocity. For data transfer, a weighted cost function selects the most energy efficient nodes / most stable nodes or a weighted combination of both. This makes the node selection criteria more dynamic. The protocol works in two steps: (1) calculating SN and (2) using SN value in the weighted cost function for selection of nodes. The study compared the proposed protocol, with other mesh-based protocols PUMA and SLIMMER, based on packet delivery ratio (PDR), throughput, end-to-end delay and average energy consumption under different simulation conditions. Results clearly demonstrate that SLIMMER-SN outperformed both PUMA and SLIMMER.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.283-287
• /
• 1996

The exhaust noise reduction of automobile with the active muffler is experimentally investigated. The control algorithm is the filtered-x LMS algorithm and the inverse algorithm with the adaptive line enhancer. Also, the control efficiency is increased with synthesized second harmonic engine frequency. In the experiment, the active muffler is applied to the end of exhaust system in automobile and the control with on-line secondary path modeling method(inverse algorithm) is compared the control of off-line secondary path modeling method. As secondary path transfer functions are changed, the experimental results show that the control performance with on-line method is more efficient than that with off-line method in the exhaust noise reduction of automobile.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.8
• /
• pp.735-746
• /
• 2020

This research is defined as a study regarding on structured and systematized of existing literature review of the intersection between intellectual property management, management and technology transfer offices (TTOs). It takes a deeper look at requirements within universities, scientific institutions and the business environment should be interconnected with each other. The literature review shows that TTOs have control over the process of knowledge transfer and they have contributed to improving the efficiency of the use of production and human resources. In this paper, authors proposed the methodological tools based on methodology model, which identified success factors for using project management in TTO between two countries - Kazakhstan and Spain. Further, we used methodology is focused on solving the problems of quantitative analysis based on the use of primary data, which allowed us to reach a huge number of respondents without any restrictions, and secondary data from statistical database. Findings and results are summarized at the end of article show that Kazakhstan is following the path of the Spanish experience. However, Kazakhstan can become more successful in commercializing scientific technologies and transferring knowledge and technologies. In turn, Spain can use the data from our analysis to work on barriers and improve the activities of TTOs.

• Journal of Chest Surgery
• /
• v.15 no.2
• /
• pp.259-265
• /
• 1982

We have designed a new type of bubble oxygenator (KOREA-KIM VENOTHERM OXYGENATOR) made of PVC sheet and deforming mesh incorporated in the heat exchanger, and evaluated in experimental animal for the analysis of it`s efficiency. The Oxygenator has low priming volume with high flow rate up to 6 L/rain, and efficiency of heat exchanger was excellent as 1-$1.5^{\circ}C.$ using total cardiopulmonary bypass method under moderate to deep hypothermia. Average priming volume of 1317 ml with 30% hemodilution method was perfused with an average of 1.1-3.0 L/min.$M^2$of arterial blood and pure oxygen at a rate of 2-3.4 L/min for 49.6 minutes continuously in average. During total cardiopulmonary bypass, average $PaO_2$ was $159.8{\pm}60$mmHg, $PaCO_2$ $41.0{\pm}3$mmHg respectively under $SaO_2$ over 96% with systolic arterial pressure of 70 mmHg and CVP of 5-10 cm$H_2O$. Plasma free Hemoglobin was $7.0{\pm}4$ mg/dl with 25% drop of hemoglobin and hematocrit at the end of cardiopulmonary bypass. This KKV Oxygenator was observed to have excellent capabillty of oxygen and carbon dioxide gas transfer with small amount of blood trauma, and the efficiency of heat exchanger was satisfactory during cooling and rewarming of the bubbled blood. Disadvantages have included the somewhat poor deforming effect due to loose PVC fiber mesh, the extracompact character of Teflon filters, and the rough inner surface of the heat exchanger copper pipes.