• Nuclear Engineering and Technology
• /
• v.45 no.5
• /
• pp.589-596
• /
• 2013

In a pressurized heavy water reactor, following loss of the primary coolant, severe core damage would begin with the depletion of the liquid moderator, exposing the top row of internally-voided fuel channels to steam cooling conditions on the inside and outside. The uncovered fuel channels would heat up, deform and disassemble into core debris. Large inventories of water passively reduce the rate of progression of the accident, prolonging the time for complete loss of engineered heat sinks. The efficacy of available backup and ultimate heat sinks, available in a CANDU 6 reactor, in mitigating the consequences of a prolonged station blackout scenario was analysed using the MAAP4-CANDU code. The analysis indicated that the steam generator secondary side water inventory is the most effective heat sink during the accident. Additional heat sinks such as the primary coolant, moderator, calandria vault water and end shield water are also able to remove decay heat; however, a gradually increasing mismatch between heat generation and heat removal occurs over the course of the postulated event. This mismatch is equivalent to an additional water inventory estimated to be 350,000 kg at the time of calandria vessel failure. In the Enhanced CANDU 6 reactor ~2,040,000 kg of water in the reserve water tank is available for prolonged emergencies requiring heat sinks.

• Animal Systematics, Evolution and Diversity
• /
• v.39 no.4
• /
• pp.254-263
• /
• 2023

Two feather mites, Brephosceles anatina Dubinin, 1951 (Analgoidea: Alloptidae) and Freyana anatina (Koch, 1844) (Pterolichoidea: Freyanidae), have been reported for the first time from the Eastern Spot-billed Duck, Anas zonorhyncha Swinhoe, 1866 (Anseriformes: Anatidae), in Korea. The genera Brephosceles Hull, 1934 and Freyana Haller, 1877 are new records of Korean fauna. The morphology of B. anatina is distinguished from three species of the lambda species group in having legs IV extending the level of setae e2 with the distal end of the tarsus in males, and the incision on the posterior margin of the hysteronotal shield triangular-shaped and distinctly longer than its greatest width in females. Freyana anatina is distinguished from F. nyrocae and F. obliquasetae in having setae ps1 with a rectangle bend in homeomorphic males, and setae ps1 obliquely ovate and divergent, with the inner canal going obliquely across the membranous part of these setae in females. This study provides morphological redescriptions of both feather mite species supplemented with partial sequences of mitochondrial cytochrome c oxidase subunit I(COI), based on specimens collected in Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.476-481
• /
• 2016

Steam power generation is used to produce electricity through a generator that is connected to a steam turbine. As a result, the surface temperature of the deaerator is $70^{\circ}C$during the summer season, the surface temperature of the storage tank is $67^{\circ}C$, and the air temperature is $50^{\circ}C$. This environment is inappropriate for workers and instruments. Workers adjacent to the deaerator and storage tank in particular feel higher temperatures because of the radiative heat transfer effect. Therefore, we optimized the cooling conditions by computational analysis. Case 1 is the current shape of the power plant, Case 2 has additional insulation, and Case 3 has a radiation shield. Flow is caused by a temperature difference between the heat sources in the wall, and hot air is trapped in the right upper end. Based on the temperature contours and the maximum temperature of the surfaces, Case 2 was found to be the most efficient for reducing radiative heat transfer effects.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.18 no.1
• /
• pp.140-159
• /
• 1994

Heraldry, which originated from the culture of knights in the 12th century, came to be drawn on shields, and was inherited as a symbol of the family at the end of the 12th century and developed rapidly through the 13th and 14th century. Afterwards heraldry was in great vogue and used in the shields, clothes of men and women, armors, housings and flags. Therefore the citizen class as well as nobles and knights came to possess heraldry. In particular parti-color and impaled coat were accepted in the clothes, and served the dual purpose of status symbol and ornament in the 13th century. It can be said that the appearance of heraldry on the clothes was typical of the Middle Ages. The origin, generally accepted, was that the crusaders wore the surcots, also known as the cyclases, on the armors to prevent the powerful sun of Syria and dust of deserts, and to prevent the armors from rusting due to moisture. As the surcot was made of white linen or white silk till the beginning of the 13th century, knight's heraldry came to be put on the surcot in order to identify each corps. According as the coat of mail covering all the body was devised, the same heraldry attached on the shield seemed to appear on the clothes of surcot or jupon(afterwards pourpoint) in order to identify the status in the battlefield and tournament. Heraldry, a system of mark in the 12th century, was used as a symbol of authority of the upper class such as the Royal House, nobles and knights, and may have been mysterious instruments in the Milddle Ages. However, in the modern times of the 20th century heraldry has come to be a kind of symbol marks such as badges and banners symbolizing the hallmark of the goods of enterprises, organizations and groups. Heraldry, existing up to now, of the individuals as well as international organizations can be seen as a result of deep-rooted tradition for esthetic appreciation and symbolism for heraldry.

• Archives of Craniofacial Surgery
• /
• v.10 no.2
• /
• pp.120-126
• /
• 2009

Purpose: Autogenous cartilage is generally first choice in rhinoplasty because of its biocompatibility and resistance to infection. On the other hand, allogeneous cartilage graft might preferred over an autogenous graft to avoid additional donor site scars, morbidity and lengthened operating time. Allogenous costal cartilage ($Tutoplast^{(R)}$) not only have the advantage of averting donor site morbidity but also are resistant to infection, resembling autogenous cartilage graft. We report here a technique for rhinoplasty by using allogenous costal cartilage graft. Methods: Through open rhinoplastic approach, alar cartilage is released from upper lateral cartilage and relocated caudally. After relocation of alar cartilage, allogenous costal cartilage is immobilized by nonabsorbable suture material at caudal aspect of septal cartilage. Caudal end of allogenous costal cartilage is sutured between medial crura of alar cartilage. Tip projection is improved by using interdormal suture, transdormal suture and shield-shape cartilage graft which is harvested from concha Results: No significant resorption and infection was detected in any of patients. Aesthetic and functional results were satisfactory. Conclusion: The low incidence of major complication and versatility of allogeneous costal cartilage graft make safe and reliable source of cartilage graft in rhinoplasty.

• Korean Journal of Acupuncture
• /
• v.34 no.3
• /
• pp.109-115
• /
• 2017

Objectives : Many researches have studied warm needling technique to standardize its treatment by temperature measurement and material differences in the effectiveness. The purpose of this study is to compare the temperature changes of the acupuncture needle shaft during the combustion process of the moxa stick to determine the heat transfer pattern of the warn needling. Methods : A moxa stick($7{\times}8mm$) was connected to one side of the needle shaft using a stainless steel needle(ø 0.3 mm, ø 0.5 mm, ø 0.8 mm, shaft length 40 mm) with the needle handle removed. During the warm needling, temperature changes of the needle shaft were observed with an infrared camera(Flir E30) and an infrared thermometer(TESTO 845). Results : In the normal condition, heat transmit of needle shaft increased at spots 10 mm and 25 mm below the moxa stick. The amount of heat transmit increased with the diameter of needle shaft. However, when the heat shield was installed to exclude radiant heat from the moxa stick, heat transfer was less at 10 mm below the moxa stick and no temperature change was observed at 25 mm below the moxa stick. Heat transfer by warm needling does not reach the end of needle shaft even in ø 0.8 mm needle. Conclusions : It is suggested that the radiant heat of moxa stick results in the heat transmit of acupuncture needle shaft. Thus, radiant heat transmit must be considered as one of the heat transfer characteristics of the warm needling.

• Journal of Oral Medicine and Pain
• /
• v.16 no.1
• /
• pp.113-120
• /
• 1991

The authors examined the patterns and various ranges of mandibular movements in TMJ lock closed patients in the frontal, sagittal and horizontal plane pre-end post-treatment. And the author obtained the following results. 1. In the frontal plane, the patterns and ranges of mandibular movement of the patients were very irregular and small before treatment. But after the treatment, the patterns were similar to the typical shield shape of the normal subjects. And the velocity of opening and closing was improved after the treatment. 2. In the sagittal plane, the mean amount of maximum mouth opening was 27.0±4.0mm before treatment and 44.0±5.4mm after treatment. And there was statistically significant improvement(p<0.005). The patterns of the movement were very irregular and small before treatment, but were similar to the shape of "Posselt's envelope of motion" after the treatment. The velocity of opening and closing was improved after the treatment 3. In the horizontal plane, the mean amount of maximum laterotrusion was 8l2±2.5mm in the affected side and 6.7±2.2mm in the non-affected side before treatment. There was a significant difference between the sides(p<0.05). After the treatment, the mean was 10.4±2.6mm in the affected side and 8.9±2.3mm in the non-affected side and there was no significant difference between the sides(p>0.05). There was no significant difference in the mean amount of maximum protrusion between the before and aftertreatment(p>0.05), but the patterns of the movements were improved.

• Journal of the Korean Society of Radiology
• /
• v.17 no.3
• /
• pp.401-410
• /
• 2023

A radiographer is a job in charge of diagnostic imaging equipment, and must contribute to the promotion of public health by suggesting an appropriate level of work. To this end, we intend to present an appropriate level of work through evaluation of human harm according to work, statistical evaluation through questionnaires, and domestic and international trends. In the case of human harm evaluation, considering radiation exposure, 42.6%, shield work, 69.7%, and in the case of magnetic resonance imaging, the maximum length of stay in the examination room should be adjusted to 15 minutes and not exceed 30 times. According to the survey statistics, it was confirmed that the physical and mental burden increased due to the high workload and difficulty compared to working hours. Based on domestic and international trends, it is necessary to adjust the examination standards for domestic radiographers to 36.8% to promote national health through qualitative improvement of radiological examinations. something to do.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.2
• /
• pp.153-160
• /
• 2010

A magnetocardiogram (MCG) is a recording of the biomagnetic signals generated by cardiac electrical activity. Biomagnetic instruments are based on superconducting quantum interference devices (SQUIDs). A liquid cryogenic Dewar flask was used to maintain the superconductors in a superconducting state at a very low temperature (4 K). In this study, the temperature distribution characteristics of the liquid helium in the Dewar flask was investigated. The Dewar flask used in this study has a 30 L liquid helium capacity with a hold time of 5 d. The Dewar flask has two thermal shields rated at 150 and 40 K. The temperatures measured at the end of the thermal shield and calculated from the computer model were compared. This study attempted to minimize the heat transfer rate of the cryogenic Dewar flask using an optimization method about the geometric variable to find the characteristics for the design geometric variables in terms of the stress distribution of the Dewar flask. For thermal and optimization analysis of the structure, the finite element method code ANSYS 10 was used. The computer model used for the cryogenic Dewar flask was useful to predict the temperature distribution for the area less affected by the thermal radiation.

• Journal of Embryo Transfer
• /
• v.33 no.4
• /
• pp.221-228
• /
• 2018

The osmolarity of a medium that is commonly used for in vitro culture (IVC) of oocytes and embryos is lower than that of oviductal fluid in pigs. In vivo oocytes and embryos can resist high osmolarities to some extent due to the presence of organic osmolytes such as glycine and alanine. These amino acids act as a protective shield to maintain the shape and viability in high osmotic environments. The aim of this study was to determine the effects of glycine or/and alanine in medium with two different osmolarities (280 and 320 mOsm) during IVC on embryonic development after parthenogenesis (PA) and somatic cell nuclear transfer (SCNT) in pigs. To this end, IVC was divided into two stages; the 0-2 and 3-7 days of IVC. In each stage, embryos were cultured in medium with 280, 320, or 360 mOsm and their combinations with or without glycine or/and alanine according to the experimental design. Treatment groups were termed as, for example, "T(osmolarity of a medium used in 0-2 days of IVC)-(osmolarity of a medium used in 3-7 days of IVC)" T280-280 was served as control. When PA embryos were cultured in medium with various osmolarities, T320-280 showed a significantly higher blastocyst formation (29.0%) than control (22.2%) and T360-360 groups (6.9%). Glycine treatment in T320-280 significantly increased blastocyst formation (50.4%) compared to T320-280 only (36.5%) while no synergistic was observed after treatment with glycine and alanine together in T320-280 (45.7%). In contrast to PA embryonic development, the stimulating effect by the culture in T320-280 was not observed in SCNT blastocyst development (27.6% and 23.7% in T280-280 and T320-280, respectively) whereas the number of inner cell mass cells was significantly increased in T320-280 (6.1 cells vs. 9.6 cells). Glycine treatment significantly improved blastocyst formation of SCNT embryos in both T280-280 (27.6% vs. 38.0%) and T320-280 (23.7% vs. 35.3%). Our results demonstrate that IVC in T320-280 and treatment with glycine improves blastocyst formation of PA and SCNT embryos in pigs.