• 제목/요약/키워드: End Shield

검색결과 52건 처리시간 0.021초

BACKUP AND ULTIMATE HEAT SINKS IN CANDU REACTORS FOR PROLONGED SBO ACCIDENTS

  • Nitheanandan, T.;Brown, M.J.
    • Nuclear Engineering and Technology
    • /
    • 제45권5호
    • /
    • pp.589-596
    • /
    • 2013
  • In a pressurized heavy water reactor, following loss of the primary coolant, severe core damage would begin with the depletion of the liquid moderator, exposing the top row of internally-voided fuel channels to steam cooling conditions on the inside and outside. The uncovered fuel channels would heat up, deform and disassemble into core debris. Large inventories of water passively reduce the rate of progression of the accident, prolonging the time for complete loss of engineered heat sinks. The efficacy of available backup and ultimate heat sinks, available in a CANDU 6 reactor, in mitigating the consequences of a prolonged station blackout scenario was analysed using the MAAP4-CANDU code. The analysis indicated that the steam generator secondary side water inventory is the most effective heat sink during the accident. Additional heat sinks such as the primary coolant, moderator, calandria vault water and end shield water are also able to remove decay heat; however, a gradually increasing mismatch between heat generation and heat removal occurs over the course of the postulated event. This mismatch is equivalent to an additional water inventory estimated to be 350,000 kg at the time of calandria vessel failure. In the Enhanced CANDU 6 reactor ~2,040,000 kg of water in the reserve water tank is available for prolonged emergencies requiring heat sinks.

The First Report of Two Feather Mites (Acariformes: Astigmata) from the Eastern Spot-billed Duck, Anas zonorhyncha (Anseriformes: Anatidae), in Korea

  • Yeong-Deok Han;Sergey V. Mironov;Gi-Sik Min
    • Animal Systematics, Evolution and Diversity
    • /
    • 제39권4호
    • /
    • pp.254-263
    • /
    • 2023
  • Two feather mites, Brephosceles anatina Dubinin, 1951 (Analgoidea: Alloptidae) and Freyana anatina (Koch, 1844) (Pterolichoidea: Freyanidae), have been reported for the first time from the Eastern Spot-billed Duck, Anas zonorhyncha Swinhoe, 1866 (Anseriformes: Anatidae), in Korea. The genera Brephosceles Hull, 1934 and Freyana Haller, 1877 are new records of Korean fauna. The morphology of B. anatina is distinguished from three species of the lambda species group in having legs IV extending the level of setae e2 with the distal end of the tarsus in males, and the incision on the posterior margin of the hysteronotal shield triangular-shaped and distinctly longer than its greatest width in females. Freyana anatina is distinguished from F. nyrocae and F. obliquasetae in having setae ps1 with a rectangle bend in homeomorphic males, and setae ps1 obliquely ovate and divergent, with the inner canal going obliquely across the membranous part of these setae in females. This study provides morphological redescriptions of both feather mite species supplemented with partial sequences of mitochondrial cytochrome c oxidase subunit I(COI), based on specimens collected in Korea.

발전소 Deaerator floor의 복사효과 저감을 위한 열유동 해석 (A thermal-flow analysis of deaerator floor of power plant for reducing the radiative heat transfer effect)

  • 김태권;하지수;최용석
    • 한국산학기술학회논문지
    • /
    • 제17권12호
    • /
    • pp.476-481
    • /
    • 2016
  • 화력발전은 화석연료인 석탄을 연소시켜 얻은 열에너지로 물을 끓여 증기를 만들고 그 증기로 터빈을 운전시켜 터빈축에 연결된 발전기로 전기를 얻는 방식이다. 따라서 하절기에는 화력발전소 Deaerator의 표면온도는 $70^{\circ}C$, Storage Tank의 표면온도는 $67^{\circ}C$, 공기온도는 $50^{\circ}C$를 상회한다. 이런 현상은 기기와 작업자에게 부적합한 영향을 끼친다. 특히, Deaerator와 Storage Tank에 인접해 있는 작업자는 복사열전달의 영향을 받아 더 높은 체감온도를 느끼게 된다. 따라서 본 논문에서는 전산해석을 통해 Deaerator 부근의 열유동 특성을 파악하고 단열재를 사용하였을 때와 복사차폐막을 사용하였을 때의 효과를 비교하여 최적의 냉각조건을 제시하였다. Case 1은 현재 발전소의 형상이고 Case 2는 Case 1에서 단열재를 추가로 사용한 형상이고 Case 3은 Case 1에서 복사차폐막을 사용한 형상이다. 유동은 벽면과 열원의 온도 차이에 의해 발생되었고 오른쪽 상단부에 고온의 공기가 포집된다. 온도 분포에서 작업자표면의 최대 온도를 비교해보면 단열재를 사용한 Case 2가 복사효과 저감에 가장 효율적인 것으로 나타났다.

서양문장의 상징성에 관한 연구 -중세 서양문장과 복장을 중심으로- (A Study on Symbolism of Western Heraldry - Focused on Western Heraldry, Dress and its Ornaments of the Middle Ages -)

  • 최영옥
    • 한국의류학회지
    • /
    • 제18권1호
    • /
    • pp.140-159
    • /
    • 1994
  • Heraldry, which originated from the culture of knights in the 12th century, came to be drawn on shields, and was inherited as a symbol of the family at the end of the 12th century and developed rapidly through the 13th and 14th century. Afterwards heraldry was in great vogue and used in the shields, clothes of men and women, armors, housings and flags. Therefore the citizen class as well as nobles and knights came to possess heraldry. In particular parti-color and impaled coat were accepted in the clothes, and served the dual purpose of status symbol and ornament in the 13th century. It can be said that the appearance of heraldry on the clothes was typical of the Middle Ages. The origin, generally accepted, was that the crusaders wore the surcots, also known as the cyclases, on the armors to prevent the powerful sun of Syria and dust of deserts, and to prevent the armors from rusting due to moisture. As the surcot was made of white linen or white silk till the beginning of the 13th century, knight's heraldry came to be put on the surcot in order to identify each corps. According as the coat of mail covering all the body was devised, the same heraldry attached on the shield seemed to appear on the clothes of surcot or jupon(afterwards pourpoint) in order to identify the status in the battlefield and tournament. Heraldry, a system of mark in the 12th century, was used as a symbol of authority of the upper class such as the Royal House, nobles and knights, and may have been mysterious instruments in the Milddle Ages. However, in the modern times of the 20th century heraldry has come to be a kind of symbol marks such as badges and banners symbolizing the hallmark of the goods of enterprises, organizations and groups. Heraldry, existing up to now, of the individuals as well as international organizations can be seen as a result of deep-rooted tradition for esthetic appreciation and symbolism for heraldry.

  • PDF

짧은 코 교정술과 비첨성형술에 있어서 동종늑연골 (Tutoplast®) 이식의 유용성 (The Usefulness of Allogenous Costal Cartilage Graft for Correction of Short Nose and Tip Plasty)

  • 최성원;원동철;임영국;홍용택;김훈남
    • 대한두개안면성형외과학회지
    • /
    • 제10권2호
    • /
    • pp.120-126
    • /
    • 2009
  • Purpose: Autogenous cartilage is generally first choice in rhinoplasty because of its biocompatibility and resistance to infection. On the other hand, allogeneous cartilage graft might preferred over an autogenous graft to avoid additional donor site scars, morbidity and lengthened operating time. Allogenous costal cartilage ($Tutoplast^{(R)}$) not only have the advantage of averting donor site morbidity but also are resistant to infection, resembling autogenous cartilage graft. We report here a technique for rhinoplasty by using allogenous costal cartilage graft. Methods: Through open rhinoplastic approach, alar cartilage is released from upper lateral cartilage and relocated caudally. After relocation of alar cartilage, allogenous costal cartilage is immobilized by nonabsorbable suture material at caudal aspect of septal cartilage. Caudal end of allogenous costal cartilage is sutured between medial crura of alar cartilage. Tip projection is improved by using interdormal suture, transdormal suture and shield-shape cartilage graft which is harvested from concha Results: No significant resorption and infection was detected in any of patients. Aesthetic and functional results were satisfactory. Conclusion: The low incidence of major complication and versatility of allogeneous costal cartilage graft make safe and reliable source of cartilage graft in rhinoplasty.

온침의 열전달 특성에 대한 실험적 해석 (Experimental Interpretation of Heat Transmits Pattern on Warm Needling)

  • 양승범;박순재;이재건;정지철;김재효
    • Korean Journal of Acupuncture
    • /
    • 제34권3호
    • /
    • pp.109-115
    • /
    • 2017
  • Objectives : Many researches have studied warm needling technique to standardize its treatment by temperature measurement and material differences in the effectiveness. The purpose of this study is to compare the temperature changes of the acupuncture needle shaft during the combustion process of the moxa stick to determine the heat transfer pattern of the warn needling. Methods : A moxa stick($7{\times}8mm$) was connected to one side of the needle shaft using a stainless steel needle(ø 0.3 mm, ø 0.5 mm, ø 0.8 mm, shaft length 40 mm) with the needle handle removed. During the warm needling, temperature changes of the needle shaft were observed with an infrared camera(Flir E30) and an infrared thermometer(TESTO 845). Results : In the normal condition, heat transmit of needle shaft increased at spots 10 mm and 25 mm below the moxa stick. The amount of heat transmit increased with the diameter of needle shaft. However, when the heat shield was installed to exclude radiant heat from the moxa stick, heat transfer was less at 10 mm below the moxa stick and no temperature change was observed at 25 mm below the moxa stick. Heat transfer by warm needling does not reach the end of needle shaft even in ø 0.8 mm needle. Conclusions : It is suggested that the radiant heat of moxa stick results in the heat transmit of acupuncture needle shaft. Thus, radiant heat transmit must be considered as one of the heat transfer characteristics of the warm needling.

악관절 폐구성 과두걸림 환자의 하악운동에 관한 연구 -치료전후의 하악운동 범위 및 양상 - (A Study on the Mandibular Movements in the Patients with TMJ Lock Closed -Range and pattern of mandibulr movement-)

  • Sung-Chang Chung;Hyung-Suk Kim
    • Journal of Oral Medicine and Pain
    • /
    • 제16권1호
    • /
    • pp.113-120
    • /
    • 1991
  • The authors examined the patterns and various ranges of mandibular movements in TMJ lock closed patients in the frontal, sagittal and horizontal plane pre-end post-treatment. And the author obtained the following results. 1. In the frontal plane, the patterns and ranges of mandibular movement of the patients were very irregular and small before treatment. But after the treatment, the patterns were similar to the typical shield shape of the normal subjects. And the velocity of opening and closing was improved after the treatment. 2. In the sagittal plane, the mean amount of maximum mouth opening was 27.0±4.0mm before treatment and 44.0±5.4mm after treatment. And there was statistically significant improvement(p<0.005). The patterns of the movement were very irregular and small before treatment, but were similar to the shape of "Posselt's envelope of motion" after the treatment. The velocity of opening and closing was improved after the treatment 3. In the horizontal plane, the mean amount of maximum laterotrusion was 8l2±2.5mm in the affected side and 6.7±2.2mm in the non-affected side before treatment. There was a significant difference between the sides(p<0.05). After the treatment, the mean was 10.4±2.6mm in the affected side and 8.9±2.3mm in the non-affected side and there was no significant difference between the sides(p>0.05). There was no significant difference in the mean amount of maximum protrusion between the before and aftertreatment(p>0.05), but the patterns of the movements were improved.

  • PDF

의료기관 내 방사선사의 검사 한도 설정에 관한 연구 (A Study on the Setting of Examination Limits for Radiographers in Medical Institutions)

  • 김정호;김갑중
    • 한국방사선학회논문지
    • /
    • 제17권3호
    • /
    • pp.401-410
    • /
    • 2023
  • 방사선사는 영상진단장치를 담당하는 직종으로 적절한 업무 수준을 제시하여 국민건강 증진에 기여하여야 한다. 이를 위해 업무에 따른 인체 유해성 평가, 설문지를 통한 통계 평가, 국내·외 동향을 통해 적절한 업무 수준을 제시하고자 한다. 인체 유해성 평가의 경우 방사선 피폭을 고려하여 42.6 %, 차폐체 작업은 69.7 %, MRI의 경우 검사실 체류시간이 최대 15분, 30회를 초과하지 않도록 조절하여야 한다. 설문통계에서는 근로시간 대비 업무량 및 난이도가 높아 신체적, 정신적 부담이 증가됨을 확인할 수 있었으며, 국내·외 동향을 통해 국내 방사선사의 검사 기준을 36.8 %까지 조절하여 방사선 검사의 질적 향상을 통해 국민건강증진을 도모하여야 한다.

심자도 장비의 냉각장치 특성 최적화를 위한 기하 설계 변수 연구 (A Study on the Geometric Design Parameters for Optimization of Cooling Device in the Magnetocardiogram System)

  • 이정희;이영신;이용호;임현균;이성진
    • 대한기계학회논문집A
    • /
    • 제34권2호
    • /
    • pp.153-160
    • /
    • 2010
  • 인체의 심장 활동에 의해 발생되는 생체 자기 신호를 심자도(magnetocardio-gram, MCG)라고 부른다. 이러한 생체자기장은 극저온 상태에서 고감도 자장센서인 SQUID(Superconducting QUantum Interference Device)를 사용함으로서 측정할 수 있다. 이 심자도 장비의 냉각장치는 액체 헬륨을 냉매로 사용하며 이 냉매를 보관하는 방법이 장비의 성능을 좌우한다. 액체 저온 듀아가 극저온 4 K에서 초전도 특성을 유지하기 위하여 사용된다. 본 연구에서는 액체 헬륨 듀아의 온도분포 특성이 연구되었다. 본 연구에서 사용된 듀아는 액체헬륨 용량이 30 L이고 5일간 유지된다. 듀아에는 150 K와 40 K의 이중 차폐체가 설치되었다. 열차폐체 끝단에서의 온도가 측정되었으며 전산모델의 해석결과와 비교되었다. 기하 설계 변수에 대한 최적화 기법을 적용하여 냉각장치인 저온 듀아의 열전단율을 최소화하였으며 듀아의 응력분포에 영향을 갖는 설계 기하 변수들의 특성을 연구하였다. 냉각장치의 열해석 및 최적화해석을 위해 유한요소 코드 ANSYS 10을 사용하였다. 저온 듀아에 사용된 전산모델은 열복사에 의한 영향을 최소화 할 수 있는 분야에서 온도 분포를 예측하는데 유용하게 사용될 수 있다.

Effect of Glycine and Various Osmolarities of Culture Medium on In Vitro Development of Parthenogenesis and Somatic Cell Nuclear Transfer Embryos in Pigs

  • Lee, Joohyeong;Lee, Yongjin;Jung, Hae Hong;Lee, Seung Tae;Lee, Geun-Shik;Lee, Eunsong
    • 한국수정란이식학회지
    • /
    • 제33권4호
    • /
    • pp.221-228
    • /
    • 2018
  • The osmolarity of a medium that is commonly used for in vitro culture (IVC) of oocytes and embryos is lower than that of oviductal fluid in pigs. In vivo oocytes and embryos can resist high osmolarities to some extent due to the presence of organic osmolytes such as glycine and alanine. These amino acids act as a protective shield to maintain the shape and viability in high osmotic environments. The aim of this study was to determine the effects of glycine or/and alanine in medium with two different osmolarities (280 and 320 mOsm) during IVC on embryonic development after parthenogenesis (PA) and somatic cell nuclear transfer (SCNT) in pigs. To this end, IVC was divided into two stages; the 0-2 and 3-7 days of IVC. In each stage, embryos were cultured in medium with 280, 320, or 360 mOsm and their combinations with or without glycine or/and alanine according to the experimental design. Treatment groups were termed as, for example, "T(osmolarity of a medium used in 0-2 days of IVC)-(osmolarity of a medium used in 3-7 days of IVC)" T280-280 was served as control. When PA embryos were cultured in medium with various osmolarities, T320-280 showed a significantly higher blastocyst formation (29.0%) than control (22.2%) and T360-360 groups (6.9%). Glycine treatment in T320-280 significantly increased blastocyst formation (50.4%) compared to T320-280 only (36.5%) while no synergistic was observed after treatment with glycine and alanine together in T320-280 (45.7%). In contrast to PA embryonic development, the stimulating effect by the culture in T320-280 was not observed in SCNT blastocyst development (27.6% and 23.7% in T280-280 and T320-280, respectively) whereas the number of inner cell mass cells was significantly increased in T320-280 (6.1 cells vs. 9.6 cells). Glycine treatment significantly improved blastocyst formation of SCNT embryos in both T280-280 (27.6% vs. 38.0%) and T320-280 (23.7% vs. 35.3%). Our results demonstrate that IVC in T320-280 and treatment with glycine improves blastocyst formation of PA and SCNT embryos in pigs.