• Safety and Health at Work
• /
• 제14권4호
• /
• pp.457-466
• /
• 2023

Background: During hot environment work tasks with whole-body enclosed anti-bioaerosol suit, the combined effect of heavy sweating and exhaled hot humid air may cause the N95 medical respirator to saturate with water/sweat (i.e., water-blocking). Methods: 32 young male subjects with different body mass indexes (BMI) in whole-body protection (N95 medical respirator + one-piece protective suit + head covering + protective face screen + gloves + shoe covers) were asked to simulate waste collecting from each isolated room in a seven-story building at 27-28℃, and the weight, inhalation resistance (R_f), and aerosol penetration of the respirator before worn and after water-blocking were analyzed. Results: All subjects reported water-blocking asphyxia of the N95 respirators within 36-67 min of the task. When water-blocking occurred, the R_f and 10-200 nm total aerosol penetration (P_t) of the respirators reached up to 1270-1810 Pa and 17.3-23.3%, respectively, which were 10 and 8 times of that before wearing. The most penetration particle size of the respirators increased from 49-65 nm before worn to 115-154 nm under water-blocking condition, and the corresponding maximum size-dependent aerosol penetration increased from 2.5-3.5% to 20-27%. With the increase of BMI, the water-blocking occurrence time firstly increased then reduced, while the R_f, P_t, and absorbed water all increased significantly. Conclusions: This study reveals respirator water-blocking and its serious negative impacts on respiratory protection. When performing moderate-to-high-load tasks with whole-body protection in a hot environment, it is recommended that respirator be replaced with a new one at least every hour to avoid water-blocking asphyxia.

• 제어로봇시스템학회논문지
• /
• 제8권9호
• /
• pp.776-787
• /
• 2002

Automation of welding process in shipyards is ultimately necessary, since the welding site is spatially enclosed by floors and girders, and therefore welding operators are exposed to hostile working conditions. To solve this problem, a welding mobile robot that can navigate autonomously within the enclosure has been developed. To achieve the welding task in the closed space, the robotic welding system needs a sensor system for the working environment recognition and the weld seam tracking, and a specially designed environment recognition strategy. In this paper, a three-dimensional laser vision system is developed based on the optical triangulation technology in order to provide robots with 3D work environmental map. Using this sensor system, a spatial filter based on neural network technology is designed for extracting the center of laser stripe, and evaluated in various situations. An environment modeling algorithm structure is proposed and tested, which is composed of the laser scanning module for 3D voxel modeling and the plane reconstruction module for mobile robot localization. Finally, an environmental recognition strategy for welding mobile robot is developed in order to recognize the work environments efficiently. The design of the sensor system, the algorithm for sensing the partially structured environment with plane segments, and the recognition strategy and tactics for sensing the work environment are described and discussed with a series of experiments in detail.

• 한국정보통신학회논문지
• /
• 제19권8호
• /
• pp.1934-1942
• /
• 2015

GPS 신호가 도달하지 않은 환경에서는 실내 위치 추정 기법을 써서 추정 문제를 풀어야 한다. 일반적으로 실내 환경에서 위치를 추정하는 기법은 AOA, TOA, RSS, Fingerprint, TDOA 등이 쓰이고 있다. 그런데 철판에 의해 막힌 공간이 많은 선박의 실내 환경에서 위치 추정은 대체적으로 근거리 추정이기 때문에 TDOA 기법을 쓰는 것이 적합하다. 본 논문에서는 선박의 환경에서 단말기가 있는 위치를 추정하는 문제를 다룬다. 이를 위해 먼저 TDOA을 써서 위치를 추정하는 문제를 구체적으로 살펴보고, 다음으로 선박 환경에 적용하기 위한 알고리즘을 제안한다. 마지막으로는 세가지 관점의 모의실험을 통해 TDOA 기법에 의한 선박 내 위치 추정에 대한 타당성을 검증한다.

• 한국해양공학회지
• /
• 제15권3호
• /
• pp.35-42
• /
• 2001

The characteristics of tidal circulation with the flow-control structures using the three-dimensional numerical model (POM, Princeton Ocean Model) of Chinhae Bay, Korea were investigated. To confirm th efficiencies of flow-control structures, the training wall and submerged training wall were constructed at the mouth and narrow channel in Chinhae Bay. On the basis of the present investigation, the tidal circulation induced by the construction of flow-control structures could enhance the water exchange improvement appropriately. And, th training wall at the central is more dominated than the other structures for the efficient of water exchange. The sites and types of structure and flow patterns seem to be very sensitive in tidal simulation and changes in flow fields.

• 한국가구학회지
• /
• 제25권4호
• /
• pp.297-303
• /
• 2014

Currently, we usually do our activities inside of the buildings, so we don't often get enough of the direct sunlight, which could cause health problems. There was a recent move to solve this issue by adding a courtyard to new constructions. This research's goals are to determine how much of rays of the sun get into the building, if the natural lighting could be used as a light for the interior. With these, we may see the outcomes of mental revitalization for the people and reduces the consumption of the energy. Also, we try to analyze the temperature and the humidity of the inside, depends on the shape of the courthouse.

• 유통과학연구
• /
• 제3권2호
• /
• pp.77-99
• /
• 2005

In the business environment which enclosed the domestic small and d medium distribution industry, and a business sign of recovery, reduction of income, job insecurity, and a national pension an aging society - positive exhibition of the large-sized store in comparison with the low personal consumption depended uneasy and deregulation, and consumer needs progress of individualization diversification it is ultimately faced with a difficult situation. Therefore the seen research examine the various range of a circulation policy through precedence research. It is going to consider and see the influence which the circulation regulation means of the purpose of large-sized store regulation and a major power is compared, and regulation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.311-314
• /
• 2001

This paper describes the simulation study, conducted on the propagation characteristics of AE signal in the connection of GIS. In the high voltage and large power system, the equipment with SF$\sub$6/ gas insulation which consists of the component part enclosed in the compressed gas has less affected by the environment than with air insulation. When the breakdown in the electric installation occurs, it takes much time to repair them though. Therefore it is very important to diagnose the propagation characteristics of AE signal in the GIS. So, in this investigation, we make a plane model of 362 kV GIS and modal and harmonic analysis to observe the vibro-acoustic property. Through the result of the analysis, we can make a further understanding on the vibro-acoustic characteristics of AE singnal in the connection of GIS.

• Asian Journal of Atmospheric Environment
• /
• 제10권4호
• /
• pp.226-231
• /
• 2016

In order to remove fog often causes various troubles in our daily lives, the novel defog blower equipped the roller brush made of recycled horse's mane hair was developed. This work presents the overview of new defog devices and the experimental data obtained at two different kinds of defogging experiments. In the model experiment carried out at the enclosed cleanroom ($W5.9m{\times}L5.1m{\times}H2.4m$) targeted a vinyl house, fog was dissipated in less than 30 seconds in case with wind entrainment and two minutes 45 seconds in case without wind entrainment after running of the newly designed defog blower. When the demisting blower was run in a duct, it has an excellent mist sweeping qualities as well as a great removal effect for the background particles (89.5% and 65.4% scavenging rates for fine and coarse particles, respectively). It can be therefore said that the mist eliminator presented in this paper is ideal for use in the sealing space like a vinyl house and the industrial sites where required to remove both harmful mist and particle.

• 환경생물
• /
• 제31권1호
• /
• pp.1-9
• /
• 2013

본 연구는 해양환경이 크게 교란을 받고 있는 4개 저서환경을 선택하여 연체동물 중 어떠한 종이 기회종의 특성을 보이는지를 조사하였다. 기회종의 특성을 보인 5종의 이매패류에 대한 분포특성을 파악하고자 하였다. 이매패류인 애기반투명조개 (Theora fragilis), 대양조개(Macoma incongrua), 종밋(Musculista senhousia) 등이 빈 산소 현상을 보이는 반폐쇄성 연안역이나 유기물 축적이 많은 퇴적물을 가진 항만해역에서 우점하여 서식하고 있었으며, 소형 개체인 말발굽조개 (Thyasira tokunagai)와 쇄개량조개 (Raetellops pulchella)는 외해역의 폐기물 해양투기장에서 우점하는 종으로 나타났다.

• 해양환경안전학회지
• /
• 제17권2호
• /
• pp.173-178
• /
• 2011

선박에 사용되는 TEMA 열교환기 전열관의 확관 공정에서 발생되는 탄소성 응력과 변형량의 거동을 유한요소법으로 해석하였다. 열교환기의 관판 구명의 홈 깊이와 롤러 익스팬더의 작용압력을 변화시켜 해석한 결과, 전열관의 관판 구멍의 홈 깊이가 커지면 탄소성 압축응력은 감소하였고, 롤러 익스팬더 압력이 높을수록 관판 구멍의 홈 모서리 부분의 탄소성 응력이 증가되었다.