• 한국기계가공학회지
• /
• 제19권5호
• /
• pp.67-74
• /
• 2020

To predict the thermal deformation of an oven cabinet during the enamel process, we propose a simple finite element analysis method comprising two steps: heating and cooling. To this end, the basic mechanical and thermal properties such as thermal expansion of the enamel and steel plate were experimentally studied, and the mechanical properties of four different stainless steel (SUS) plates were evaluated to select the target material for the oven at high temperature conditions from 400 ℃ to 700 ℃. In the first analysis step of the enamel process, the SUS plate was heated to 850 ℃ and was then thermally expanded without considering the enamel coating. Next, assuming the perfect bonding of two materials (enamel coating and metal plate), the enamel plate was allowed to cool to room temperature till 22 ℃. From the results of comparing the experimental and analytical data, we can make a conclusion that the proposed method can be applied to evaluate the thermal deformation of enamel products. Especially, the thermal deformation of the oven can be predicted with different enamel coating conditions, such as uniform and nonuniform coating thickness.

• Restorative Dentistry and Endodontics
• /
• 제20권1호
• /
• pp.1-16
• /
• 1995

The purpose of this study was to investigate the effect of dentin bonding agents on the bond strength of composite resin restorations in case of applying the dentin bonding agents to acid etched enamel surfaces. Freshly extracted 364 bovine anterior teeth were selected as a adherents. 320 enamel specimens were divided into two groups(unetched group (1) and etched group (2) for testing the shear bond strength, 40 specimens were used for the hardness testing, and 4 specimens of rest were to observe the resin-tag formation into etched enamel surfaces. All surfaces of enamel specimens were polished with 320~1500 SiC paper under continuous running water. In Group (1), 100 enamel specimens were polished and unetched. 220 polished enamel specimens in Group (2) were etched with 37 % phosphoric acid solution for 60 seconds, washed with water for 20 seconds, and dried with a light air pressure for 60 seconds. Three kinds of dentin bonding agents(Gluma, Prisma, Scotchbond 2) were evaluated the effect on the bond strength to conditioned enamel surfaces. Shear bond strengths were measured on the three cases such as a coating of primer only, a coating of sealer only, and a sequential coating of primer and sealer to acid etched enamel surfaces were compared with the bond strengths measured by the coating of enamel bonding agent followed by the bonding of composite resin (Photo clearfil bright, Kuraray, Japan) to unetched and acid etched enamel surfaces. In addition, the hardness tested on the adhesive fractured surface between composite resin enamel as a mean of evaluation of a factor whether the mechanical bond strengths were affected and the penetration of dentin bonding agents into etched enamel surfaces was also observed. Bond strengths were measured using the method of shear bond strength by a universal testing machine (Instron-4467, USA), statistical test were applied to the results using a one way analysis variance(ANOVA), and hardness was measured by the Vicker's Hardness Tester(MHT-i, Matsuzawa, Japan) and the penetration of the resins were observed by the SEM (Hitachi, S-2300, Japan). The following conclusions were drawn; 1. Enamel bonding agent showed to affect the improvement of bond strength of composite resin to enamel surface both unetched and etched. 2. Dentin bonding agents could be resulted in increase of bond strength to unetched enamel surface, but there were no statistical significances. 3. Bond strengths to etched enamel surface were significantly decreased with a coating of dentin primer only. 4. Coating of sealer only and coating of primer and sealer noticed the similar bond strengths of composite resin to etched enamel using the enamel bonding agents. 5. The applying method proved to be more effective than the kinds of dentin bonding agents on the bond strength of composite resin to etched enamel than the kind of dentin. 6. Vicker's hardness numbers of dentin bonding agents were lower than that of composite resin, but the degree of penetration of dentin bonding agents into etched enamel surfaces was excellent.

• Tribology and Lubricants
• /
• 제34권6호
• /
• pp.235-240
• /
• 2018

Superlubricity refers to the lubrication phenomenon that occurs when the friction coefficient is lower than 0.01. In recent years, this phenomenon has received a significant amount of attention because it can greatly contribute to the reduction of economic and environmental losses caused by friction and wear. In the case of acid lubricants, only ceramic materials can be used for superlubricity, and it takes a long running-in period to enter the superlubricity regime. In this work, we investigated the superlubricity effect of vitreous enamel coating on SUS304. We also examined the running-in period of vitreous enamel coating under phosphoric acid lubricant condition with respect to surface treatments. Drying and polishing methods were used to treat the vitreous enamel coating on the specimen. The friction experimental results revealed that superlubricity could be achieved with vitreous enamel coating. It was also found that the drying and polishing methods can significantly reduce the running-in period and improve the wear properties of vitreous enamel coating. In particular, the polishing method shortened the running-in period by approximately 99% and reduced the wear rate by approximately 99%, compared to nontreated vitreous enamel coating.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2003년도 춘계 학술발표회 논문집
• /
• pp.579-587
• /
• 2003

에나멜 도장장치의 건조 과정에서는 유해한 VU가 다량 배출된다. 이 VOC 가스는 촉매연소를 통해 완전 소각될 수 있으며, 소각되는 과정에서 발생된 열은 공정에 다시 사용할 수 있다. 본 연구에서는 이러한 기술적 특성을 이용하여 환경개선과 에너지 절감 효과가 뛰어난 에나멜 도장장치를 개발하였다. 이를 위한 기초 연구로서 촉매의 VOC 가스에 대한 연소 특성 및 성능 평가와 수치해석이 수행되었다. 연구 결과에 의하면, 고온에서 VOC에 대한 금속 촉매 폼의 성능은 우수한 것으로 나타났으며, 건조 과정이 효율적으로 진행되기 위해서는 재 순환 가스 공급량 및 건조 가스 흡입량의 정밀한 조절이 가능한 구조로 설계되어져야 함을 보여 주었다.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.148-157
• /
• 1993

A study was conducted to evaluate the effect of enamel coating on boat hull drag. The results were compared with drag required for varnished uncoated boats. Models of rice barge and fishing boat were used in this study. The speed range of 0.6 to 1.5㎧ at different loads varying from 6 to 9 kg for rice barge and 4.6 to 6.4kg for fishing boats were used during testing. The total weight of the coated and uncoated boats were kept the same. It was observed that the drag force required by the coated boats was less than identical uncoated ones at all speeds and loads. For both uncoated and coated the drag required increased with speed. The maximum recorded reductions in drag were 26% for the rice barge and 28% for the fishing boat model.

• 한국정밀공학회지
• /
• 제30권6호
• /
• pp.638-643
• /
• 2013

Laser beam machining (LBM) is fast, contactless and able to machine various materials. So it is used to cut metal, drill holes, weld or pattern the imprinted surface. However, after LBM, there still leave burrs and recast layers around the machined area. In order to remove these unwanted parts, LBM process often uses electrochemical etching (ECE). But, the total thickness of workpiece is reduced because the etching process removes not only burrs and recast layers, but also the entire surface. In this paper, surface coating was performed using enamel after LBM on metal. The recast layer can be selectively removed without decreasing total thickness. Comparing with LBM process only, the surface quality of enamel coating process was better than that. And edge shape was also maintained after ECE.

• 융합정보논문지
• /
• 제10권2호
• /
• pp.82-88
• /
• 2020

본 연구는 화공용 열교환기에서 법랑코팅 적용을 위한 고온의 소성 공정조건 최적화에 대한 기초자료를 얻고자 하는데 그 목적이 있다. Shell & Tube 형태인 열교환기에 법랑코팅 적용을 위해 소성온도를 순차적으로 높이는 방안에 대해 검토하였다. 소성로 내부에서 열교환기의 온도분포에 대해 CFD 상용 프로그램으로 수치계산하여 구한 온도를 하중조건으로 열응력 해석을 수행하는 연성 해석(FSI) 방식을 이용하여 열교환기의 구조 안전성에 미치는 영향을 확인하였다. 수치해석 및 실험결과 상온의 열교환기를 바로 860℃도의 소성로에 넣으면 열교환기의 국부적 온도차로 인한 구조 안전성에 문제가 발생하므로 온도차를 줄이기 위한 예열 과정이 필요하다. 소성공정 단계가 적은 Case2와 같이 1단계 예열온도 445℃, 2단계 소성온도 860℃가 가장 적합한 것으로 판단된다.

• 공업화학
• /
• 제4권2호
• /
• pp.264-272
• /
• 1993

소형화되는 전기, 전자 제품의 효율성과 신뢰성를 제고시키기 위해서 주요 부품인 마그네트 와이어의 내열성에 대한 연구가 진행되고 있다. 마그네트 와이어의 내열성은 주로 에나멜 바니쉬로부터 형성되는 고분자 피막의 물성과 밀접한 관계가 있다. 내열성 에나멜 바니쉬의 설계와 도막 형성과정이 와이어의 물성과 관련지어 논의되었다. 아울러 내열성에 영향을 주는 요인들을 완성 와이어의 물성 평가방법을 통하여 고찰하였다.

• 한국치위생학회지
• /
• 제10권4호
• /
• pp.757-764
• /
• 2010

Objectives : The fluoride coating for caries prevention and strengthen enamel use NaF(sodium fluoride, Junsei Chemical Co., Ltd, Japan) 2% gel, SnF2(stannous fluoride, SIGMA-ALDRICH Gmbh, USA)8% gel and APF(acidulated phosphate fluoride, Sultan health care, USA) 1.23% gel. Methods : After put the enamel piece in these fluoride compound gel, we observed density level. And after measuring the vickers hardness, Got the following conclusions. Results : 1. After settling in the APF 1.23% during 6 days, we observed high density level of enamel surface using 250 magnification scanning microscope. The vacuum of surface packed (in) like sardines. 2. After settling in the APF 1.23% during 6 days, we observed reducing the space between the cluster of enamel surface using 50,000 magnification scanning microscope. 3. The vickers hardness change was very much on the all kinds of fluoride compound gel[2% NaF(sodium fluoride)gel, 8% SnF2(stannous fluoride) gel, 1.23% APF(acidulated phosphate fluoride)gel]. It's all because of reducing the space between the cluster of enamel surface(p<0.001). Conclusions : The vickers hardness change was very much on the all kinds of fluoride compound. It's all because of reducing the space between the cluster of enamel surface.

• 한국연소학회지
• /
• 제22권4호
• /
• pp.35-42
• /
• 2017

This case covers the issues related to the operation problem, cause analysis and improvement cases of the FGD that employed the non-leakage type GGH in coal-fired power plant for the first time in Korea. In the Cooler, there was a main problem that the tube is damaged by the ash cutting due to the high velocity of flue gas in the duct and by the weak wear resistance of material. In the Reheater, there was a main problem that the tube was corroded due to chlorine and sulfur in the circumstance of the low temperature. In order to solve those problems, we have improved the Reheater tube and tube fins by coating enamel to reduce corrosion rate.