목적: 본 연구의 목적은 치열교정용 레진시멘트의 보관 조건이 치열교정용 브라켓의 접착강도에 미치는 영향을 보고자 함이다. 연구 재료 및 방법: 소의 하악 절치 순면 법랑질에 37% 인산으로 산 부식 후 치열교정용 레진시멘트인 Ortho Connect와 Orthomite를 3개월간 4℃ 냉장 보관 후 즉시 적용, 3개월간 4℃ 냉장 보관 후 24시간 동안 실온 보관하고 적용, 3개월간 24℃ 실온 보관 후 적용하는 세 조건에 따라 각 조건별로 15개의 하악 절치용 치열교정용 금속브라켓을 접착하고 광중합 한 뒤 24시간 후에 만능재료시험기로 전단접착강도를 측정하고 접착 실패 양상을 관찰하였다. 측정한 전단접착강도를 95% 유의수준에서 레진시멘트와 보관 조건에 대해 이원배치분산분석을, 레진시멘트에 보관 조건이 미치는 영향에 대해 일원배치분산분석을 했다. 결과: Ortho Connect는 냉장 보관 후 즉시 사용했을 때 가장 높은 전단접착강도를 보였으며 다른 조건 사이에는 차이가 없었다. Orthomite는 냉장 보관 후 즉시 사용했을 때 가장 낮은 전단접착강도를, 3개월 실온 보관했을 때 가장 높은 전단접착강도를 나타냈으며 이 두 조건 사이에만 유의한 차이가 있었다. 결론: Ortho Connect는 냉장 보관 후 즉시 사용해도 적절한 접착이 가능하지만, Orthomite는 냉장 보관을 한다면 충분한 실온 보관을 하는 것이 접착에 유리할 것으로 사료된다.
본 연구는 교정 치료 중 탈락된 브라켓의 재접착 시 탈락 전과 유사한 위치로 재접착하기 위하여 브라켓 탈락 전 위치의 지표가 될 수 있는 잔여 레진을 제거하지 않고 flowable resin을 이용하여 재접착을 시행하는 방법을 제안하고 이 재접착 방법의 임상적 유용성을 알아보기 위하여 시행되었다 브라켓이 탈락된 치아 표면의 잔여 레진을 제거하고 산 부식 후 Transbond XT를 이용하여 새로운 브라켓을 접착하는 통상적인 재접착 방법을 사용한 군을 대조군으로 하고 탈락된 브라켓과 치아 표면의 잔여 레진을 제거하지 않고 치면을 산부식 후 탈락된 브라켓을 Transbond XT와 CharmFil Flow로 재접착한 군을 각각 실험군으로 하였다. 실험군과 대조군의 각 군간 전단 결합강도를 비교하였으며 ARI score를 이용하여 브라켓의 탈락 양상을 관찰하였고 탈락 양상에 따른 전단결합강도를 비교하였다. 그 결과 실험군 중 Transbond XT를 이용하여 재접착한 군$(6.30\pm1.01MPa)$의 전단결합강도가 대조군$(6.51\pm1.21 MP3)$에 비하여 낮긴 하지만 통계적으로 유의한 차이가 없었으며(P=0.534), CharmFil Flow를 이용하여 재접착한 군$(7.29\pm1.54MPa)$은 Transbond XT을 이용하여 재접착한 군에 비하여 유의성 있게 높은 전단결합강도를 보였다 (P=0.009). 탈락 양상을 관찰했을 때 대조군에서는 레진 내부, 브라켓-레진, 레진-치면 간의 파절 양상이 고르게 나타났으나 실험군에서는 레진-치면간의 탈락 양상은 보이지 않았고 레진 내부. 브라켓-레진 간의 탈락이 유사하게 나타났으며 브라켓의 탈락 양상에 따른 전단결합강도의 차이는 통계적으로 유의하지 않았다. (P>0.05) 이상의 결과로 미루어보아 본 연구에서 제시된 재접착 방법과 flowable resin의 재접착제로서의 사용 가능성은 충분할 것으로 보인다.
본 연구의 목적은 산부식과 전처리 과정을 결합하여 접착 단계를 단순화시킨 self-etching primer의 임상적인 유용성 을 판단하고자, self-etching primer로 브라켓을 접착하는 방법과 기존의 $37\%$ 인산으로 부식하여 접착하는 방법을 사용하여, 광중합시 사용되는 광원 및 브라켓 종류에 따른 전단결합강도와 접착파절양상에 관하여 비교 연구하는 것이다. 사람의 상하악 소구치를 포매하여 만든 시편을 부식 및 전처리 방법에 따라 각각 $37\%$ 인산으로 산부식 후 Transbond XT primer를 사용하여 접착한 군과 Transbond Plus self-etching primer를 사용하여 접착한 군으로, 광원 종류에 따라 가시광선과 plasma arc light을 이용하여 중합한 군으로 나누었고, 브라켓 종류에 따라 금속브라켓과 세라믹 브라켓을 사용하여 접착한 군으로 분류하여 각 군간의 전단결합강도와 접착파절양상을 관찰하여 다음과 같은 결과를 얻었다. 1. 광원과 브라켓 종류가 동일한 조건일 때, self-etching primer를 사용하여 접착한 군과 XT primer를 사용하여 접착한 군간의 전단결합강도는 통계적으로 유의한 차가 없었다. 2. 금속브라켓을 접착한 경우, 광원과 부식 및 전처리 방법에 따른 전단결합강도는 통계적으로 유의한 차가 없었다. 3. Self-etching primer와 XT primer를 사용하여 접착한 군 모두에서 세라믹 브라켓을 사용하여 접착한 군의 전단결합 강도는 금속브라켓을 사용하여 접착한 군보다 통계적으로 유의하게 컸다(p<0.001). 4. 접착제 잔류지수는 self-etching primer를 사용하여 접착한 군과 XT primer를 사용하여 접착한 군에서 통계적인 유의한 차가 없었으며, 세라믹 브라켓을 사용하여 접착한 군에서 금속브라켓을 사용하여 접착한 군보다 유의하게 커서, 법랑질-레진 접착 계면 부위의 파절이 더 많은 것으로 나타났다. 이상의 결과로 미루어 보아 Transbond Plus self-etching primer를 사용하여 브라켓을 접착하는 것은 적절한 결합강도를 얻으면서도 사용이 간편하고 시술 시간을 단축시킬 수 있으므로 임상적으로 유용할 것으로 판단된다.
One of the latest concepts in bonding are "total etch", in which both enamel and dentin are etched with an acid to remove the smear layers, and "wet dentin" in which the dentin is not dry but left moist before application of the bonding primer Ideally the application of a bonding agent to tooth structure should be insensitive to minor contamination from oral fluids. Clinically, contaminations such as saliva, gingival fluid, blood and handpiece lubricant are often encountered by dentists during cavity preparation. The aim of this study was to evaluate the effect of contamination by hemostatic agents on shear bond strength of compomer restorations. One hundred and ten extracted human maxillary and mandibular molar teeth were collected. The teeth were removed soft tissue remnant and debris and stored in physiologic solution until they were used. Small flat area on dentin of the buccal surface were wet ground serially with 400, 800 and 1200 abrasive papers on automatic polishing machine. The teeth were randomly divided into 11 groups. Each group was conditioned as follows : Group 1: Dentin surface was not etched and not contaminated by hemostatic agents. Group 2: Dentin surface was not etched but was contaminated by Astringedent$^{\circledR}$(Ultradent product Inc., Utah, U.S.A.) Group 3: Dentin surface was not etched but was contaminated by Bosmin$^{\circledR}$(Jeil Pharm, Korea.). Group 4: Dentin surface was not etched but was contaminated by Epri-dent$^{\circledR}$(Epr Industries, NJ, U.S.A.). Group 5: Dentin surface was etched and not contaminated by hemostatic agents. Group 6: Dentin sorface was etched and contaminated by Astringedent$^{\circledR}$. Group 7 : Dentin surface was etched and contaminated by Bosmin$^{\circledR}$. Group 8: Dentin surface was etched and contaminated by Epri-dent$^{\circledR}$. Group 9: Dentin surface was contaminated by Astringedent$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. Group 10: Dentin surface was contaminated by Bosmin$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. Group 11 : Dentin surface was contaminated by Epri-dent$^{\circledR}$. The contaminated surface was rinsed by water and dried by compressed air. After surface conditioning, F2000$^{\circledR}$ was applicated on the conditoned dentin surface The teeth were thermocycled in distilled water at 5$^{\circ}C$ and 55$^{\circ}C$ for 1,000 cycles. The samples were placed on the binder with the bonded compomer-dentin interface parallel to the knife-edge shearing rod of the Universal Testing Machine(Zwick Z020, Zwick Co., Germany) running at a cross head speed or 1.0 mm/min. Group 2 showed significant decrease in shear bond strength compared with group 1 and group 6 showed significant decrease in shear bond strength compared with group 5. There were no significant differences in shear bond strength between group 5 and group 9, 10 and 11.
본 연구는 5급 와동에서 유동성 복합 레진 수복 시 수종의 상아질 접착제에 따른 미세 누출 양상을 비교하고, resin tag 및 혼성층의 형상을 전자 현미경으로 관찰하고 비교 분석하였다. 행동 조절에 어려움이 많은 소아 환자의 접착 수복에서 술식의 간편화 및 시간 단축이 장점으로 부각되고 있는 All-in-one 상아질 접착제의 임상 적용 가능성을 평가하고 다음과 같은 결론을 얻었다. 1. 법랑질 변연에서는 II군(AQ Bond Plus)이 가장 높은 미세누출을 보였고 III군($AdheSE^{(R)}$ One), I군($Adper^{TM}$ Single Bond 2) 순으로 감소하였으며, II군은 I군, III군과 통계학적 유의차를 보였고(p<0.05), I군과 III군 사이에는 유의차가 없었다. 2. 상아질 변연에서는 II군, I군, III군의 순으로 미세누출이 증가하였고, 각각 통계학적 유의차를 보였다(p<0.05). 3. I군과 III군에서는 법랑질 변연이 상아질 변연보다 유의하게 낮은 미세누출을 보였으나(p<0.05), II군에서는 통계학적 유의차를 보이지 않았다(p>0.05). 4. 주사전자현미경 소견에서 II군과 III군은 resin tag의 형성이 매우 미약하고 불규칙한 양상을 보인 반면, I군에서는 비교적 긴밀하고 균일한 resin tag가 관찰되었다. 이상의 결과를 종합해보면, AQ Bond Plus와 $AdheSE^{(R)}$ One은 처리 과정의 단순화로 인한 시간 절약의 장점을 가지고 있으나 $Adper^{TM}$ Single Bond 2에 비해 상대적으로 높은 미세누출과 약한 결합력을 보인 본 실험의 결과를 미루어 볼 때, 임상적용 시 술식과 case에 따른 선택적 사용이 추천되는 바이다.
본 연구의 목적은 시중에 유통되고 있는 밴드 시멘트들을 종류별로 이용하여 교정용 밴드의 결합강도를 비교하고, 각 시멘트의 파절 양상을 비교하여 교정용 밴드에 대한 사용지침을 마련하는데 도움이 되고자 하였다. 100개의 발거된 인간의 제 3대구치를 이용해 실험군은 총 5개의 군으로 하였으며, 각 군당 시편수가 20개가 되도록 임의적으로 분류하였다. 실험에 사용한 밴드 시멘트는 다음과 같다; Ormco gold, Ultra $Band-Lok^{TM}$, Fuji $Ortho^{TM}$ LC, 3M $Unitek^{TM}$ Multi-Cure Glass Ionomer, $Ketac-Cem^{TM}$. Universal testing machine(Instron Corp., Canton, MA, USA)를 사용하여 최대하중값을 측정하였고, 전단결합강도 값을 계산하였다. 밴드가 탈락한 후, 탈락 부위를 평가하여 법랑질과 시멘트, 시멘트와 밴드 사이로 구분하였다. 밴드의 전단강도는 One-way ANOVA를 이용하여 통계처리 하였으며 Tukey test를 이용하여 검정하였다. 또한 탈락 부위는 Chi-squre analysis를 이용하여 통계 처리하였고, Fisher's exact test로 군간 유의성을 검정하였다. 실험 결과 평균 파절 강도는 Ormco군이 가장 높았고(2.44${\pm}$0.57), Fuji $Ortho^{TM}$군(2.24${\pm}$0.50), $Ketac-Cem^{TM}$군(2.10${\pm}$0.57), 3M $Unitek^{TM}$군(1.82${\pm}$0.43), $Band-Lok^{TM}$군(1.73${\pm}$0.28) 순이었으며, Ormco군은 $Band-Lok^{TM}$군과 3M $Unitek^{TM}$군, Fuji $Ortho^{TM}$군은 $Band-Lok^{TM}$군과만 통계적으로 유의할만한 차이를 보였다(p<0.05). 파절 양상에서 Ormco군과 $Band-Lok^{TM}$군은 서로뿐만 아니라 다른 군과 유의할만한 차이를 보였으며, Fuji $Ortho^{TM}$, 3M $Unitek^{TM}$, $Ketac-Cem^{TM}$ 군 간에는 유의한 차이가 없었다.
이 연구는 시간 경과에 따라 폴리아크릴산 용액으로 표면 조건화된 법랑질에 대한 광중합형 글래스아이오노머 시멘트의 브라켓 전단결합강도를 인산용액으로 부식된 법랑질에 대한 치과 교정용 레진 접착제의 그것과 비교하여 브라켓을 접착할 때 상용되어 온 치과교정용 레진 접착제를 광중합형 글래스아이오노며 시멘트로 대체할 수 있는지의 여부를 구명하기 위하여 시행되었다. 발거된 사람 소구치의 법랑질 표면을 각각 10% 폴리 아크릴산용액과 38% 인산용액으로 처리한 후, 각각 시판되고 있는 광중합형 글래스아이오노머 시멘트의 일종(Fuji II LC)과 화학중합형 치과교정용레진접착제의 일종(Mono-Lok 2)으로 법랑질 표면에 금속브라켓을 접착하고, 시편을 실온에서 5분, 15분 방치한 후, $37^{\circ}C$의 증류수 속에 1일, 35일 동안 침지시킨 후, 브라켓 전단결합강도를 측정하고, 접착파절 패턴을 관찰하였다. 브라켓 접착5분과 15분 후의 광중합형 글래스아이오노머 시멘트의 브라켓 전단결합강도는 치과교정용 레진 접착제의 그것보다 유의성 있게 높았다. 광중합형 글래스아이오노머 시멘트와 치과 교정용 레진 접착제의 브라켓 전단결합강도는 브라켓 접착 1일 까지 증가하였으나 1일군과 35일군의 그것 사이에 통계적 유의차가 없었다. 이상의 결과는 광중합형 글래스아이오노머 시멘트가 브라켓 접착제로서 임상적인 유의성이 있음을 시사한다.
The aim of this study was to evaluate the marginal adaptation of direct class II sandwich restoration with packable composites(P-60), resin modified glass ionomer cement(Fuji-II LC), flowable compomer(Dyract Flow), flowable composites(Filtek Flow) in comparison with total bond restorations. In addition, for sandwich restorations, influence of different sandwich techniques was also evaluated. Large butt-joint box typed class II cavites with cervical margins 1mm below the cemento-enamel junction were cut into 70 extracted human molars. The cavities(7 groups, n=10) were filled using a closed/open sandwich restoration or total bond restoration technique with materials according to the manufacturer's recommandation using the single-component bonding agent for each system. Teeth were thermocycled 500 times between 5$^{\circ}C$ and 55$^{\circ}C$ with 30-second dwell time. The teeth were then coated with nail polish 1mm short of the restoration, placed in a 2% methylene blue for 24 hours, and sectioned with diamond wheel. Sections were examined with a stereoscope to determine the extent of microleakage. Dentine /Cementum margins were analyzed for microleakage on scale of 0(no leakage) to 4(entire axial wall) and interface between materials, on scale of 0(no leakage) to 3(axial wall). Results were evaluated with Kruskal Wallis Test, corrected for ties, to determine whether there were statistically significant differences among the seven groups. Pairs of groups were analyzed using the Student-Newman-Keuls Method and Dunn s Method. The results were as follows : 1. All groups showed some micoleakage in cervical portion. But there were no microleakage in interface between materials. 2. Closed sandwich restorations with Fuji-II LC and Filtek Flow had significantly lower leakage rating than total restorations with only P-60. However, open sandwich restorations with Dyract Flow showed significantly higher (P<0.05) 3. Closed sandwich restorations had significantly lower leakage rating than total restorations. However open sandwich restoration s showed significantly higher (P<0.05). 4. Sandwich restorations with Fuji-II LC were iou$.$or leakage than only P-60. Filtek Flow, Dyract Flow. But there were no statistically differences among the materials. From the results above, it could be concluded, closed sandwich restorations was effective in reducing microleakage of class II restorations. The best results showing the least microleakage were for the closed sandwich technique with Fuji-II LC and Filtek Flow.
본 연구는 치면열구전색술시 치과용 염료를 이용하여 초기 우식병소의 유무와 유기물의 잔재를 확인하고 산부식 액의 도포시 brushing방법을 이용하여 침투를 깊이 유도함으로써 열구내 법랑질의 산부식 상태를 유지력을 얻기 위한 최상의 상태로 만들고자 하는 목적으로 자연치를 대상으로 여러 가지 치면세마법과 비교하여 다음과 같은 결과를 얻었다. 1. 실험군은 기존의 치면세마법보다 변연누출이 적었으나 enameloplasty를 시행한 군과는 차이가 없었다. 2. 법랑질 산부식 형태의 질이 향상되었다. 3. 실험군은 다른 군에 비해 미세결합강도가 높았다. 4. 구강내 환경적 조건이 치면열구전색재의 성공실패를 좌우한다. 이상의 결과를 종합하면 치면열구전색술시 치과용 염료와 산부식 액의 도포시 brushing 방법을 이용하여 침투를 깊이 유도하므로써 수복물의 성공적인 도포를 제공할 수 있다고 사료된다.
STATEMENT OF PROBLEM. Over the years, resin-bonded fixed partial dentures (RBFPDs) have gone through substantial development and refinement. Several studies examined the biomechanics of tooth preparation and framework design in relation to the success rate of RBFPDs and considered retention and resistance form essential for increase of clinical retention. However, these criteria required preparations to be more invasive, which violates not only the original intentions of the RBFPD, but may also have an adverse effect on retention due to loss of enamel, an important factor in bonding. PURPOSE. The object of this in vitro study was to compare the dislodgement resistance of the new types of RBFPDs, the conventional three-unit fixed partial denture, and conventional design of RBFPD (Maryland bridge). MATERIAL AND METHODS. Fifty resin mandibular left second premolars and second molars were prepared on dentiforms, according to the RBFPD design. After model fabrication (five group, n = 10), prostheses were fabricated and cemented with zinc phosphate cement. After cementation, the specimens were subjected to tensile loading at a cross head speed of 4 mm/min in a universal testing machine. The separation load was recorded and analyzed statistically using one-way analysis of variance followed by Duncan's multiple range test. RESULTS. Group V, the pin-retained RBFPDs, had the highest mean dislodgement resistance, whereas specimens of group II, the conventional RBFPDs, exhibited a significantly lower mean dislodgement resistance compared to the other 4 groups (P <.05). There were no significant differences between group I, III, and IV in terms of dislodgement resistance (P>.05). Group V had the highest mean MPa (N/$mm^2$) (P <.05). There was no significant difference between groups I, II, III and IV (P > .05). CONCLUSION. Within the limits of the design of this in vitro study, it was concluded that: 1. The modified RBFPDs which utilizes the original tooth undercuts and requires no tooth preparation, compared with the conventional design of RBFPDs, has significantly high dislodgement resistance (P < .05). 2. The modified RBFPDs which utilizes the original tooth undercuts and requires minimal tooth preparation, compared with the conventional FPDs, has significantly no difference in retention and dislodgement resistance)(P>.05). 3. The pin-retained FPDs showed a high dislodgement resistance compared to the conventional three-unit FPDs (P<.05).
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.