• Journal of Oral Medicine and Pain
• /
• v.41 no.3
• /
• pp.85-90
• /
• 2016

Purpose: The aim of this study was to develop an automated software to extract tooth and pulpal area from sectional cone-beam computed tomography (CBCT) images, which can guarantee more reproducible, objective and time-saving way to measure pulp/tooth volume ratio. Methods: The software program was developed using MATLAB (MathWorks). To determine the optimal threshold for the region of interest (ROI) extraction, user interface to adjust the threshold for extraction algorithm was added. Default threshold was determined after several trials to make the outline of extracted ROI fitting to the tooth and pulpal outlines. To test the effect of starting point location selected initially in the pulpal area on the final result, pulp/tooth volume ratio was calculated 5 times with different 5 starting points. Results: Navigation interface is composed of image loading, zoom-in, zoom-out, and move tool. ROI extraction process can be shown by check in the option box. Default threshold is adjusted for the extracted tooth area to cover whole tooth including dentin, cementum, and enamel. Of course, the result can be corrected, if necessary, by the examiner as well as by changing the threshold of density of hard tissue. Extracted tooth and pulp area are reconstructed three-dimensional (3D) and pulp/tooth volume ratio is calculated by voxel counting on reconstructed model. The difference between the pulp/tooth volume ratio results from the 5 different extraction starting points was not significant. Conclusions: In further studies based on a large-scale sample, the most proper threshold to present the most significant relationship between age and pulp/tooth volume ratio and the tooth correlated with age the most will be explored. If the software can be improved to use whole CBCT data set rather than just sectional images and to detect pulp canal in the original 3D images generated by CBCT software itself, it will be more promising in practical uses.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.3
• /
• pp.504-508
• /
• 2008

Delayed eruption and abnormal morphology of the primary incisors following intubation may be due to follicular displacement and localized trauma caused by the process of intubation. Result of such damage included palatal groove formation, defective incisors and acquired clefts. This clinical report presents effect of intubation on the primary dentition of premature low-birth-weight children prior to tooth eruption.

• Conservation Science in Museum
• /
• v.18
• /
• pp.51-64
• /
• 2017

The Bracket clock in the collection of the Korean Christian Museum at Soongsil University underwent conservation treatment for a special exhibition. The compositional analysis showed that the body was made of brass plated with gold by fire-gilding(gold amalgam process), while the dial was identified as pure copper coated with enamel. The hands were made of steel. Remnants of adhesive tape on the dial were cleaned, followed by the addition of a protective coating. In order to restore it to a condition as similar to its original form as possible, replacements for missing parts were newly constructed out of brass and were connected to the hands and the dial. The dial was then fixed to the body using an acrylic support. The compositional analysis and conservation treatment have left the clock in stable condition and readily available for exhibitions and future studies.

• Restorative Dentistry and Endodontics
• /
• v.23 no.1
• /
• pp.20-42
• /
• 1998

The present study was designed to understand the basic principles of the laser system and to assess the optimal coditions of the Nd:YAG laser irradiation system in order to expand the use of the laser system in the dental field. The laser system used in this study was a pulsed-wave output type and the power level is 9 watts. The incisors of developing rats were irradiated with the laser system explained above for 0.5, 1, and 2 seconds giving energy density 71, 167, and 215 J/$cm^2$ respectively. The rats were sacrificed just after irradiation or 10 minutes and 10 days after irradiation. The specimens were examined with the stereoscope, light microscope and transmission electron microscope. The results are as follows: 1. The tissue removal efficiency (depth of the cavity formed) is increased with the energy density after Nd:YAG laser irradiation. 2. The carbonized area is increased with the energy density. Cracks and melted appearance are seen in all kinds of the energy densities. 3. The lacunae in the damaged alveolar bone by the laser irradiation were empty, while those in the newly formed bone were occupied with the osteocytes. The damaged alveolar bone was repaired by the osteoblasts and macrophages on the periphery of the bone matrix. 4. The damaged enamel was replaced by the loose connective tissues showing many kinds of cells. The ameloblasts were differntiated on the replaced loose connective tissue. 5. The damaged dentin was repaired by the irregular dentin formed by the odontoblasts differentiated from the mesenchymal cells migrated from the pulp core.

• The korean journal of orthodontics
• /
• v.32 no.4 s.93
• /
• pp.293-300
• /
• 2002

The purpose of this study was to evaluate the clinical effectiveness of hydrophilic primer, which claim to retain adequate bond strength on moistened enamel resulting from moisture or saliva contamination, by comparing the shear bond strength and adhesive failure patterns of brackets bonded using hydrophilic primer and conventional hydrophobic primer. Brackets were bonded to human premolars embedded in metal cylinders utilizing light cured adhesive, primed with either a hydrophilic primer(Transbond fm primer) or a conventional hydrophobic primer(Transbond XT primer). Each sample was exposed to varying degrees of artificial saliva contamination during the priming process. The shear bond strength was measured using a universal testing machine, and the adhesive failure patterns after debonding were visually examined by strereomicroscope and assessed using the adhesive remnant index(ARI). The results were as follows 1. In dry conditions, no significant differences in shear bond strength between Transbond W and Transbond XT primers were found. 2. Transbond MIP primer exhibited a significantly higher shear bond strength than Transbond XT primer in saliva-contaminated conditions, regardless of the degree of contamination. 3. When contaminated with one coat of saliva, Transbond MIP primer did not exhibit significant differences in shear bond strength compared to the dry condition. When contaminated with two coats of saliva, Transbond MIP primer exhibited a singnificantly lower shear bond strength compared to the dry condition. 4. The adhesive remnant index of the adhesive failure pattern had a tendency to decrease, as the degree of saliva contamination increased. Bracket-adhesive interface failure was observed in more than half of the saliva contaminated samples utilizing Transbond MIP primer, whereas the bond failure sites of the Transbond XT primer samples occurred almost exclusively at the adhesive-enamel interface in saliva-contaminated conditions. The results of this study suggest that in cases where moisture control is difficult, Transbond MIP primer is an effective alternative to conventional hydrophobic primers.

• The korean journal of orthodontics
• /
• v.29 no.6 s.77
• /
• pp.689-698
• /
• 1999

Although the purpose of orthodontic treatment is to increase the function and aesthetics of the jaws as well as to increase stability, there are side effects from the treatment itself such as root resorption and alveolar bone resorption. Such resoiption of the apical root is unpredictable and may even proceed into the dentin layer. Once the process has begun, it is irreversible. By evaluating the effects of different oral habits, especially that ef nail biting, and their correlation with the root and the periodontal tissues, the appropriate biomechanics for orthodontic treatment can be taken into consideration. The possibility of root resorption and alveolar bone loss during orthodontic treatment can also be considered. Also, any legal problems that might occur may be pondered as well. Among the male md female patients of the ages 10~15, 63 were chosen as the test group with known nail biting habits at time of examination and within the same age range those without nail biting habits as the control group. The test group was composed of 30 males and 33 females. The control group had 31 males and 32 females. The result from this study were as follows : 1. Of the 63 patients of both the test and control groups, the male-to-female-ratio was 1:1, and had no statistically significant difference in male and female root resorption. 2. In comparing crown length of the test and control groups, no significant difference existed, but in root length, maxillary and mandibular right and left central incisors and mandibular right lateral incisors had a smaller value. (p<0.001) 3. Average crown-to-root ratio of the test group on the periapical view show a noticeably high value for the maxillary and mandibular right and left central incisors and mandibular right and left lateral incisors. (p<0.01) 4. In comparing and evaluating the alveolar bone loss measured from the cemento-enamel junction to the alveolar bone crest, mesial surfaces of the maxillary and mandibular right and left central incisors and distal surface of maxillary right central incisor of the test group showed greater loss of crestal bone than the control. (p<0.05)

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.4
• /
• pp.189-195
• /
• 2022

Purpose: For orthodontic bracket bonding, light curing resin cement is widely used because the process is convenient, and it can be polymerized at the desired time. This study compared the difference of bonding strength of orthodontic resin cement according to storage condition. Materials and Methods: After acid etching the bovine enamel surface with 37% phosphoric acid, 15 orthodontic brackets for mandible incisors were bonded with Ortho Connect and Orthomite LC according to following three conditions; 1) Immediate after 4℃ refrigeration for 3 months (IR), 2) One day room temperature after 4℃ refrigeration for 3 months (OR), 3) Room temperature for 3 months (RT). The shear bond strength was measured with a universal material tester and failure pattern of the specimen was observed. Two-way ANOVA and One-way ANOVA were used at the 95% significance level. Results: Ortho Connect that was applied immediately after refrigeration showed the maximum shear bond strength. Orthomite that was applied immediately after refrigeration showed the lowest shear bond strength, and the group stored at room temperature for three months showed the highest shear bond strength, and the difference between the two groups was significant. Conclusion: Ortho Connect can be used without worrying about bond strength even if it is used immediately after refrigeration, but Orthomite should be kept at room temperature sufficiently after refrigeration.

• The Journal of the Korean dental association
• /
• v.55 no.2
• /
• pp.156-164
• /
• 2017

Purpose: The aim of this in vitro study was to assess changes in remineralization by stimulated human saliva over a short period of 48 hours with quantitative light-induced fluorescence (QLF) technology. Materials and Methods: Bovine incisor surfaces were demineralized for 10 days. Two types of stimulated saliva were collected from 7 healthy persons. 24 hours after tooth brushing (Stimulated saliva group) and immediately after tooth brushing with 1,000 ppm NaF dentifrice (Dentifrice saliva group). The specimens were immersed in saliva and fluorescence images were obtained by QLF-digital (QLF-D $biluminator^{TM}$,) at 2, 4, 6, 12, 24, and 48 hours fluorescence loss (${\Delta}F%$) of the lesions. A paired t-test was performed to assess fluorescence differences between before (${\Delta}F_{baseline}$) and after (${\Delta}F_{treatment\;time}$) the remineralization process. Results: Before the remineralization, the mean ${\Delta}F_{baseline}$ of the initial demineralized specimens was $-18.42{\pm}0.15$ (%). In both groups, the ${\Delta}F$ values obtained at baseline and after 2 hours were statistically significant (P < 0.001), indicating recovery of the lesions by approximately 40% after 2 hours. After 48 hours, remineralization rates were slightly higher (49%) for the stimulated saliva group than for the dentifrice saliva group (41%), but the difference was not statistically significant. Conclusions: With QLF minute degrees of remineralization by saliva can be measured in periods as short as 2 hours. Additionally no significantly higher effects of remineralization were observed in the dentifrice saliva group when compared to the stimulated saliva group.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.176-182
• /
• 2018

One of the most important factor of esthetic prosthesis is the color of the teeth. Zirconia is produced in the process of design, milling, coloring, drying, and sintering. The effect of the drying degree of zirconia colorant on the color tone is examined. For the experiment, a total of 45 zirconia specimens(15 for each) were fabricated by using cad/cam system. The zirconia specimens(L block(LAZOR), Z block(Zircos-E block posterior), A block(AlphaZ)) were then subjected to zirconia sintering in accordance with the manufacturer's instructions, using a chemical coloring agent to Non-drying(0sec), intermediate (10sec), and completely dried (10min) temperature holding times. The color tone was measured using a spectrophotometer. The results were analyzed with a One-way analysis of variance and the Tukey post-hoc test (${\alpha}=.05$) The $L^*$ values of L, A specimens, $a^*$ values of A specimens, and $b^*$ values of Z specimens were not statistically different according to the degree of drying (p>0.05), While the $L^*$ value of Z specimen, $a^*$ value of L, Z specimen, $b^*$ values of L, A specimens were statistically different according to the degree of drying(p <0.05). In conclusion, the drying of zirconia colourants improves zirconia brightness and increases the optical properties of the enamel.

• The Journal of the Korean dental association
• /
• v.54 no.7
• /
• pp.521-528
• /
• 2016

Purpose: The aim of this study was to evaluate the erosive potential of several fruit-flavored liquors marketed in Korea by measuring pH, titratable acidity, and variations in pH utilizing an ISO method. Materials and Methods: Six fruit-flavored liquors were investigated. An orange juice and three kinds of soju were selected as the control beverage. The pH and titratable acidity of the beverages were determined by 1 M NaOH until the pH 5.5 and 7.0 (recorded as $TA_{5.5}$ and $TA_{7.0}$, respectively). All measurements were performed in triplicate. The process of ISO 28888 was used for measurement of the pH variation (${\Delta}pH$) using an under-saturated hydroxyapatite solution (screening solution) and determining the difference between the initial and final pH of the screening solution. The average ${\Delta}pH$ was determined based on 4 measurements. Results: All the fruit-flavored liquors tested in this study showed a pH lower than the critical pH for dental erosion (4.5). The average pH of the fruit-flavored liquors was 2.77 and was also lower than the pH of the soju and an orange juice (control drinks). $TA_{5.5}$ and $TA_{7.0}$ values of the fruit-flavored liquors were 4.92ml and 7.13ml, respectively. The fruit-flavored liquors showed an erosive potential capable of damaging the enamel surfaces, whereas the orange juice had the highest titratable acidity. The changes in pH determined using the screening solution confirmed that the fruit-flavored liquors had erosive potential, with ${\Delta}pH$ value of 1.53. Conclusions: The fruit-flavored liquors tested in this study might have a strong potential to erode dental hard tissues.