• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.25 no.2
• /
• pp.79-87
• /
• 2016

Single visit monolithic restoration can be proceed with digital workflow which consist of intraoral scanning, dental CAD(computer aided design) and restoration milling with CAM(Computer aided manufacturing). While zirconia has more than 900MPa of flexural strength compared with 400MPa for lithium disilicate, shortened fabricating time of lithium disilicate is considered to be a better choice for fabricating single visit full contour monolithic restoration. However, new zirconia materials which are TZI C(Dentsply Sirona) and LUXEN Enamel(Dental Max), new induction heating method of sintering furnace, and new sintering protocols for MoSi2 heating elements sintering furnace offer significantly reduction of full contour monolithic zirconia restoration fabrication time with greater translucency. These new developments lead single visit zirconia restoration in reality.

• Resources Recycling
• /
• v.21 no.3
• /
• pp.48-55
• /
• 2012

Recently, the recycling with environmentally friendly method has been an issue for various fields. An effective removal method of coating layers from coated copper wires is one critical factor for recycling copper wire. We have adopted a high frequency heating routine for removing the coating layers on the coated copper wires, and attempted to find optimum conditions. The experimental results show that the copper wires should be maintained at or above $950^{\circ}C$ for rapid removal of the polyester. The simulation and experimental results are discussed with respect to the microstrucrual evolution during heating of the copper wires.

• The korean journal of orthodontics
• /
• v.26 no.4
• /
• pp.389-399
• /
• 1996

Remineralization of acid-etched enamel across the time has been one of the curiosities in the context of the orthodontic biomechanics(Arends J. et al., IRL Press, 1, 1985), nevertheless, is so far controversial. It was the aim of this study to observe the remineralization patterns of acid-etched enamel across the time and whether the existence of fluoride might carry out any modifications. The intact buccal surfaces of the first bicuspids which was extracted for orthodontic treatment were ground smooth, and etched with a 38w/w% phosphoric acid for 60 seconds, The surface was observed by the scanning electron microscope and surface microhardness was measured after immersion in the fluoride or non-fluoride containing remineralizing solution for 0 hour, 12 hours, 1 day, 3 days, 7 days, 14 days, 28 days, and 42 days. The following results and conclusions were drawn; 1. Surface microhardness increased in both fluoride containing and non-fluoride containing solution group with time lapse. 2. In fluoride containing solution group, the surface microhardness sharply increased at the 12 hours group, on the other hand, surface microhardness increased at 3 days in non-fluoride containing solution group. 3. The difference in microhardness value between two groups manifested gradual decrease. 4. Scanning electron microphotographs disclosed that the fluoride containing solution group generated spiculate sub-stances in the 12 hours group, which was increased in number and size with time lapse. 7 days later, spherical composure was began to be produced, The spiculate substances so much increased in number that the etched enamel surface looked like flat in 42 days. 5. In non fluoride-containing solution group, there was no surface change at 42 days, perceivable in scanning electron microphotographs which could be defined as remineralization though the surface was a little rougher than the incipient etched surface. These results demonstrate that the action of the fluoride is exceedingly pertinent in the remineralization of acid-etched enamel and the remineralization process goes uninterruptedly with time lapse.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.2
• /
• pp.183-191
• /
• 2007

Through out the world dental caries seems to be decreased as it is difficult to make an accurate diagnosis for dental caries. The traditional diagnostic method which is probing and x-ray taking has many limitations to diagnose the early caries, so there were recommendations for the needs of new equipments such as laser fluorescence(LF), digital imaging fiber-optic trans-illumination(DIFOTI), and quantitative light fluorescence (QLF) which were developed from various study results. Also confocal laser scanning microscopy(CLSM) and ultrasonics are used for research progression. This study is to evaluate whether it is possible to monitor accurately for remineralization amount of enamel surface early caries using DIFOTI or LF After inducing artificial caries to bovine teeth to 10 participants remineralization was enhanced by 0 ppm and 500 ppm fluoride mouth rinse solution for 3 weeks. Then they were cross sectioned and analyzed using gold standard of the lesion depth measured by CLSM. The following results were obtained: 1. The measured percentage of light intensity(luminosity ratio) by DIFOTI increased with remineralization period, and showed significant reverse correlation with lesion depth measured by CLSM (p<0.01). 2. The measurement of laser fluorescence increased with remineralization period, and showed significant correlation with lesion depth measured by CLSM (p<0.01). 3. To the result for CLSM, 500 ppm fluoride mouth rinse group showed rapid rate for decreased tendency of lesion depth than 0 ppm fluoride mouth rinse group. In conclusion DIFOTI system was used to measure accurately for the remineralization amount of early surface caries, it is a very useful equipment to detect precisely the changes for early enamel caries remineralization during treatments.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.30 no.1
• /
• pp.44-48
• /
• 2016

In this paper, we analyzed the operating characteristics of a ventilating fan due to overload and overheating. The experiment assumed the forcible restraint of the blade due to external objects and the aging process. We analyzed the experimental temperature and operating characteristics of the three places in the interior of the ventilating fan. As a result of the analysis, the temperature distribution was highest to lowest in the following order: the thermal fuse, the motor inside, and the above winding. There was smell of burning enamel in the restraint experiment. Following the thermal fuse operation, the insulation of motor winding was good. In the case of rated voltage and new ventilating fan restrained for about 4hours, and the results of restraint experiments in the presence or absence of the thermal fuse, no risk of deformation or fire due to overheating was identified. Henceforward, ignition hazard experiments will be required for additional factors of aging, pollution, and defective insulation.

• Conservation Science in Museum
• /
• v.12
• /
• pp.25-34
• /
• 2011

This study examined conservation process of white porcelain bottle with phoenix and peony design poly chrome, recovery of golden powder painted porcelain being damaged and colored, and recovery material and conservation methods by using a variety of experiments. Not only traditional method but also modern method can recover golden powder painted area being damaged and/or peel off, and suitable recovery was found out by using experiments. The golden powder paint of pattern edge was recovered not by traditional method but by modern method of golden powder paint with acrylic paint and binder.

• Journal of Technologic Dentistry
• /
• v.36 no.3
• /
• pp.205-217
• /
• 2014

Purpose: This study will examine the differences among the college dental morphology textbooks in light of their contents and learning objectives through which we will propose an optimal way of consolidating those differences found. Methods: Five college textbooks adopted in the dental related departments were selected by random and the overview and subdivisions of contents were compared and closely analysed with regards to the learning objectives. Results: Firstly, all of the dental morphology textbooks cover the learning objectives of the dental morphology subject, especially in the area of the overview of dental morphology, the permanent tooth, deciduous tooth. Only the dentistry textbooks explain the learning objective of the occlusion. Secondly, differences in content were found in the area of component tissue and around tissue, dental formula of deciduous teeth, spinous process, buccal pit, enamel projection, curve symbol, tip of cusp position of proximal surface of permanent mandibular canines, buccal cusp position of permanent mandibular second premolars. Conclusion: It is imperative to delineate some meaningful and critical differences in contents among the dental morphology textbooks and reflect this to each and every textbook to be published as a supplementary information guide or index.

• Journal of the Korea Convergence Society
• /
• v.10 no.4
• /
• pp.189-194
• /
• 2019

This thesis aimed to apply the 3D-printing technology rapidly introduced to the overall industry to jewelry design. In the results of examining preceding researches, out of 3D-printing methods, the FMD method was used the most in design area. However, for jewelry design, the 3D-printing is used for casting process out of production processes, so that the printing method is not FMD, but DLP. Thus, the researcher examined the material functions and applicability of jewelry design through research works, by applying the 3D-printing in DLP method to jewelry design. In the results, brooches were completed by applying the 3D-printing to the jewelry design with no casting process, and then utilizing enamel and pure silver together. Producing light and solid completed products in various colors, they were verified as applicable materials. Also, as the size and form of curved design mainly used for non-geometric jewelry design could be accurately predicted through Rhino CAD, diverse possibilities of advancement to be easily used for the development of formative form of jewelry design in the future were revealed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.1
• /
• pp.38-45
• /
• 2009

The aim of this study was to examine efficacy of the commercially available 10% CPP-ACP cream (Tooth mousse, GC Co., Japan) and/or 0.05% NaF solution on the remineralization of artifical caries-like lesion in the bovine teeth enamel. Sixty bovine teeth were embedded in orthodontic resin and flattened. The enamel surface in 3 mm diameter was exposed with nail varnish. Specimens were stored in demineralizing solution and divided 5 groups; Group 1 (No treatment), 2 (0.05% NaF solution 1 min), 3 (Tooth mousse 3 min), 4 (After 0.05% NaF solution, Tooth mousse treatment), and 5 (After Tooth mousse treatment, soaking in 0.05% NaF solution during 1 min). After treatment by groups, all specimens was stored in artificial saliva for 30 min. After the process described as above was performed during 10 days without pH cycling, surface hardness (Vickers Hardness Number, VHN) was tested and analyzed by paired t-test and one-way ANOVA test with SPSS 14.0. In intragroup comparison between surface hardness of pre and post-treatment, group 3, 4, 5 showed statistically significant increase (P < 0.05). In intergroup comparison among surface hardness increase of all groups, difference of group 5 between pre and post-treatment ($15.80{\pm}12.21$) was the highest, and followed by group 4 ($14.27{\pm}11.73$), 3 ($4.05{\pm}5.18$), 2 ($1.15{\pm}6.83$), 1 ($0.78{\pm}6.21$). Tooth mousse can be a good alternative agent for the fluoride, and the combination use with fluoride might have the additional anticariogenic effect.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.49 no.3
• /
• pp.264-273
• /
• 2022

Due to the development of properties of adhesive materials currently used in dentistry, the bonding ability between the brackets and the tooth enamel has been greatly improved. In general, in situations where cooperation can be obtained, adhesion of the orthodontic bracket through the conventional three-step process can show excellent bonding strength. However, if it is difficult to expect patient cooperation, as in the pediatric dentistry area, or if moisture isolation is not properly performed, the binding strength that does not reach the expected effect. As a result, various products that simplify the process for adhesion are being developed. The aim of this study was to evaluate and compare the shear bonding strength between the conventional 3-step adhesion system, self-etching primer system and one-step adhesion system that reduces the priming process. A total of 60 human maxillary, mandibular premolars were prepared. Group I (control group) were followed conventional 3-step bonding process. Group II were conditioned with self-etching primer. Group III were etched with 37% phosphoric acid and brackets were bonded with self-priming adhesive. The resultant shear bond strength of each group was measured and an adhesive remnant index (ARI) was recorded. The mean shear bond strength of group I, II, III were 14.69 MPa, 11.21 MPa and 12.21 MPa respectively. Significant differences could only be found between group I, II and group I, III (p < 0.05). The ARI indicated no significant difference among all groups.