• Journal of the korean academy of Pediatric Dentistry
• /
• v.44 no.2
• /
• pp.138-146
• /
• 2017

The aim of this study was to estimate time of biomineralization in developmental stages of rat lower incisors. Eruption length was measured. Four stages of incisor development were identified on histologic and microscopic computerized tomography (micro-CT) sections: (1) preodontoblast, (2) dentin matrix secretion, (3) enamel matrix secretion, and (4) enamel calcification. The overall eruption rate of the rat lower incisor was $600{\pm}70{\mu}m/day$ ($mean{\pm}SD$; n = 12). The length of the enamel secretion was $4.59{\pm}0.75mm$ in histologic section, was $3.64{\pm}0.63mm$ in radiographic section, which converts to $180.4{\pm}30.0hours$, $145{\pm}25hours$ respectively (n = 24). These findings suggested that the four biomineralizing developmental stages of the rat incisor took only several days. The significance of this animal study was to provide understanding for the rapid biomineralization process of developing rat tooth germ by analysis of tooth forming period.

• Journal of dental hygiene science
• /
• v.11 no.1
• /
• pp.55-61
• /
• 2011

The purpose of this study was to investigate the biological function of ODAM and its signal transduction pathway in the steps of ameloblast differentiation and enamel mineralization. An ODAM recombinant protein was produced and stable ODAM transgenic cell lines were also established using ameloblast-lineage cells (ALCs). To verify the ODAM signal transduction pathway, BAMBI recombinant protein, an inhibitor of BMP2 and BMP receptor 1B (BMPR-1B), was treated and BMPR-1B siRNA was used to silence expression of BMPR-1B. Mineralization was augmented by the ALCs treated with the ODAM recombinant protein and the sense ODAM overexpressing cells. The ALP activity was also increased markedly in the sense ODAM overexpressing cells and the ALCs treated with ODAM recombinant protein. The inactivation of ODAM in the ALCs down-regulated the expression of BMPR-1B, whereas its expression was up-regulated markedly when ODAM was overexpressed. These results provide deeper insights into the process of ameloblast maturation and in enamel mineralization. It also suggested that ODAM augmented enamel mineralization.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.791-800
• /
• 1997

Sixty premolars extracted for orthodontic treatment were divided into four groups, and the residual resin was removed with four different rotary finishing instruments at a fixed speed of $18,500{\pm}300 rpm$ on the low speed handpiece. The instruments were G1; No.169L carbide fissure bur, G2: No.2 round bur, G3; No.4 round bur, G4: No.8 round bur. Then, the enamel received a S-second polishing with a rubber cup and a pumice. To find the extent of loss on the enamel at this point, prophylaxis was done with the rubber cup and pumice prior to bonding of the bracket(P1) and removal of residual resin by means of appropriate procedure applicable to each respective group(P2) followed. The final polishing was done with the rubber cup and pumice(P3), and the enamel surface roughness was measured each by the surface measuring instrument. The whole process was observed under a scanning electron microscope to gain the following results: At P2, the enamel surface roughness in G1 showed most smoothly with $2.60{\pm}0.55{\mu}m;\;in\;G2,\;3.24{\pm}0.80{\mu}m;\;in\;G3,\;3.44{\pm}0.94{\mu}m;\;in\;G4,\;3.89{\pm}0.54{\mu}m$, the roughest. G2 and G3 showed no statistical significance(P>0.05). At P3, the enamel surface roughness in G1 showed most smoothly with $2.29{\pm}0.47{\mu}m;\;in\;G2,\;2.44{\pm}0.56{\mu}m;\;in\;G3,\;2.44{\pm}0.56{\mu}m;\;in\;G4,\;2.92{\pm}0.43{\mu}m$, the roughest. G1 vs G2, G3, and G2 vs G3 had no statistical significances(p>0.05). In all groups, P2 and P3 showed rougher in surface roughness than P1, and P2 rougher than P3(p<0.01). In a case of 5-second prophylaxis with the rubber cup and the pumice on a virgin, normal enamel, fine scratches were found under the scanning electron microscope. In all four groups, unremovable gouges remained even after polishing with the ubber and pumice; residual resin was not observed with naked eye when finished with the rubber and pumice, but the resin debris was observed under the scanning electron microscope.

• Korean Journal of Health Education and Promotion
• /
• v.13 no.2
• /
• pp.167-183
• /
• 1996

Human teeth vary widely in color. Practitioner and patients are concerned with preventing and correcting discolored or dark teeth to achieve and maintain stain-free, white teeth. Tooth brushing cannot alter tooth color but it can remove adhering films and stains. The esthetics of natural dentition can be improved by bleaching and this process can be applied to intrinsically and extrinsically stained teeth. The need for a brighter, more attractive smile has made rapid growth in the market for tooth whiteners. There is no doubt these products work as whiteners, at least on mild to moderate stains, but the safety of these products are unclear. In this experiment, the effect of tooth whitener application on the color and microhardness of extracted human enamel was measured. RMS, RMT and NWT were used as tooth whiteners, and tooth paste(ETQ) and hydrogen peroxide solution(HPO) were used as controls. 35 caries-free extracted human molars were embedded and polished with the exposed enamel diameter of 4 mm. The tooth whiteners and control agents were applied according to the manufacturers' instructions or clinically simulated procedures for eight weeks, and measurements were repeated every two weeks. Value(L＊) difference was measured using Differential Colorimeter(Model TC-6FX, Denshoku Co., Japan), and microhardness was measured using microhardness tester(Mitsuzawa Seiki Co., Japan). The results were as follows; 1. After application of agents for eight weeks, the Vickers hardness increased significantly in the ETQ, RMS and RMT application group(p〈0.01), and that decreased significantly in NWT application group(p〈0.01), but in HPO application group there was no significant change. The change in microhardness was greatest in NWT application group(p〈0.01). 2. After application of tooth whiteners and controls for eight weeks, the value change of toothpaste application group was significantly lower than those of other agents groups(p〈0.01), and there was no significant difference in value(L＊) change among tooth whitener groups(p〉0.01). 3. The application of tooth paste and paste type tooth whitener made gradual value change, but hydrogen peroxide gel type tooth whitener and hydrogen peroxide solution made rapid value change during initial application period.

• Restorative Dentistry and Endodontics
• /
• v.34 no.1
• /
• pp.20-29
• /
• 2009

The purpose of this study is to observe and compare the dynamic change of artificially demineralized enamel by remineralization solutions of different degrees of saturation at pH 4.3. In this study, 30 enamel specimens were demineralized artificially by lactic acid buffered solution. Each of 10 specimens was immersed in pH 4.3 remineralization solution of three different degrees of saturation (0.22, 0.30, 0.35) for 10 days. After demineralization and remineralization, images were taken by a polarizing microscope (${\times}100$). The density of lesion were determined from images taken after demineralization and remineralization. During remineralization process, mineral deposition and mineral loss occurred at the same time. After remineralization, total mineral amount and width of surface lesion increased in all groups. The higher degree of saturation was, the more mineral deposition occurred in surface lesion and the amount of mineral deposition was not much in subsurface lesion. Total demineralized depth increased in all groups.

• Restorative Dentistry and Endodontics
• /
• v.26 no.5
• /
• pp.372-378
• /
• 2001

The aim of this in vitro study was to analyze the composition of human tooth enamel in terms of three components, Ca, P, and F after demineralization and remineralization in acid buffer solution. A total of 8 human premolars without any defects and cracks were selected and buccal and lingual sides of the teeth were cleaned with an ultrasonic device and pumice without fluoride 5$\times$5mm windows were opened, and other areas were completely covered with 3-coats of nail varnish to prevent from being in contact with demineralized and remineralized solutions. After demineralization process, each tooth was sectioned into two slices, highly polished one of them with$\gamma$-alumina, and then analyzed the composition of the demineralized tooth with EPMA(electron probe micro-analyzer). The other slices were put into the remineralized solution for 10 days, polished, and analyzed in the same manner. These data were statistically analyzed with one sample t-test(p<0.05). The results were as follows. 1. Normal tooth enamel consists of 49.76% Ca, 39.80% P, and 0.28% F. 2. After demineralization, percentage of Ca and P ratio were decreased by about 5.57 and 5.07% respectively. Percentage of F ratio was also decreased by about 0.01%, which was not statistically significant. 3. After remineralization, percentage of Ca, P increased about by 4.47 and 4.35% respectively Percentage of F decreased by about 0.01%, which was not statistically significant. In conclusion, remineralized solution used in our study has the potential to induce the uptake the Ca and P into the pore sites of the demineralized enamel. But, in the oral cavity. there were rapid temperature change, organic matrix that inhibits the movement of the ions, and limitation of continuous contact with this remineralized solution. Therefore, further in vivo study is necessary.

• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.330-336
• /
• 1999

In biological systems, the mineral that forms hard tissue is of an apatitic nature, and hydroxyapatite($Ca_5OH(PO_4)_3$: HA) is generally considered as the prototype for such a mineral. Thus, the precipitation of HA, having biological implications, has been the subject of several investigations. Crystal growth studies using HA seeds in supersaturated solutions have enhanced our understanding of the process and mechanism involved in seeded crystal growth. From these studies, it has become apparent that the precipitation rate of HA onto the seed crystals depends on the various conditions, especially on the additives. The relation between the supersaturated solution containing fluoride and the process of HA crystal growth enhances the understanding of mechanism of HA crystal growth. Until recently, the studies have been on the crystal growth of enamel minerals and synthetic HA seeds in the supersaturated solution containing 1~2 ppm fluoride. The purpose of the present investigation is to study the effect that fluoride of high concentration has on the crystal growth kinetics of HA. In order to produce the composition found in the secretory enamel fluid, experimental solutions of 1mM Ca, 3mM P, and 100mM Tris as background electrolyte were used. Then this experimental solutions were added to 0, 2, 4, 6, 8, 10 ppm fluoride. The effect of fluoride at high concentrations on the precipitation was examined in a bench-top crystal growth model adopting a miniaturized reaction column. Chemical analysis was employed for characterization of working solutions before and after the experimentation. Remarkable findings were : 1) the amount of crystal growth was gradually accelerated as the fluoride concentration increased until 6 ppm, but decreased in 8 and 10 ppm fluoride; 2) the amount of fluoride ion consumed in crystal formation was constant despite the increase in fluoride concentration.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.194.2-194.2
• /
• 2016

Magnesium has many desirable properties of which the high strength/weight ratio makes it extremely valuable in automobile and aerospace industry. However, the high corrosion susceptibility of magnesium and its alloys has greatly limited their large scale use for various applications. Organic coating is one of the most effective ways to prevent magnesium alloys from corrosion. An organic coating is normally used in the final stage of a coating process. It can enhance corrosion resistance of magnesium and its alloys. Organic coating involves a variety of process such as painting, powder coating, cathodic electrocoating (E-painting) and the application of lacquers, enamel and varnishes.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.10 no.1
• /
• pp.67-76
• /
• 1983

The state of pulp and dental hard tissue during the process of resorption and shedding of 104 non-carious primary teeth was assessed by histomorphologic study. The teeth were extracted from the Korean school children aged 5 to 15 and classified into preshedding, shedding, delayed shedding groups according to the age of the child at the time of extraction, The results were as follows: 1. The inflammatory cell infiltration in primary pulp tissues occurred in 61.5% of observed teeth and were increased in the order of preshedding, shedding and delayed shedding stages. 2. The odontoclasts were appeared in 43.3% of observed teeth and were increased in the order of preshedding, shedding and delayed shedding stages. 3. The polymorphonuclear leukocytes and odontoclasts couldn't be observed in the exfoliated primary pulp tissues before the process of resorption has involved the root surface about 1.8mm subjacent to the cemento-enamel junction. 4. The intact root surface was the longest and largest in the preshedding stage. 5. The resorption process of primary teeth roots occurred mainly in the stage of preshedding and shedding stages. 6. There was a tendency of repair of resorbing root surfaces in the delayed shedding stage.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.1
• /
• pp.133-149
• /
• 1998

Clinical application of composite resin recently draw great concerns in dentistry. Especially due to advantages such as esthetics, adhesiveness, simple clinical procedures, various shapes and kinds of composite resins are widely being applied to prosthodontics, conservative dentistry, and orthodontics. But, clinical problems attributable to the polymerization shrinkage of composite resin have been proposed, and we have to regard clinical problems such as secondary caries, loss of restoration, fracture of the surrounding tooth structure, marginal discoloration, and tooth sensitivity, and many portions are remained to be overcome. Therefore, this study attempts to analyze stress distribution between resin and tooth structure which is generated during polymerization shrinkage of composite resin using three dimensional finite element method. Three dimensional finite element models with conventional box-shape cavity and erosion/abrasion type V-shape lesion cavity in upper central incisor were developed. These cavities were filled with four different types of placement techniques. (bulk filling, horizontal increment filling, oblique occlusal increment filling, oblique gingival increment filling) The stresses generated by polymerization shrinkage of composite resin were calculated. The results analyzed with three dimensional finite element method were as follows : 1. The increment filling technique showed the highest maximum normal stress in both conventional box-shape and V-shape cavities and showed a tendency to decrease after complete polymerization. 2. The bulk filling technique resulted in increased stresses during the curing process in both conventional box-shape and V-shape cavities and the highest maximum normal stress occurred after complete polymerization. 3. The bulk filling resulted in the lowest maximum normal stress in both box-shape and V-shape cavities 4. Regardless of placement method, in conventional box-shape cavity, the maximum normal stress increased in dentin floor, enamel, dentin sequence and in V-shape cavity, the maximum normal stress increased in enamel, dentin sequence.