• Bulletin of the Korean Chemical Society
• /
• 제33권7호
• /
• pp.2320-2324
• /
• 2012

A novel approach for metabolite extraction and fingerprinting was introduced based upon the nano-baskets and emulsion liquid membrane-nuclear magnetic resonance (ELM-NMR) technique. The objective of this method is optimizing the fingerprints, minimizing the metabolic variation from analysis, increasing the likelihood differences, and obtaining the maximum extraction yield. Low molecular weight metabolites in rat serum were recovered by ELMs using 12 nano-baskets of calixarene, as both emulsifier and carrier. The yields of ELMs were optimized by the method of one-at-a-time. According to NMR data, the maximum metabolic variation was achieved using scaffold 4 (4 wt %), n-decane membrane, stirring rate of 300 rpm, treat and phase ratios of 0.3 and 0.8, respectively. The results revealed that some calixarenes tend to extract non-specific macromolecules; and repeatability of fingerprints for 7-mediated ELM was maximum and for 3-mediated ELM was minimum. The yield of extractions was obtained to be higher for n-decane and lower for carbon tetrachloride. Among different membranes, the fingerprints by chlorinated liquid membranes were more repeatable than using toluene or n-decane.

• 한국가축번식학회지
• /
• 제22권1호
• /
• pp.89-94
• /
• 1998

A study was made to investigate the effects of concerning factors with IGF-I recovery on the final IGF-I concentration in the effluent and to establish recovery conditions of IGF-I using liquid emulsion membranes(LEM). D2EHPA was best carrier among Amberlite LA2, Aliquit 336 and D2EHPA for recovery rate of IGF-I. Recovery rate of IGF-I by D2EHPA volume in the oil phase was increased as increasing D2EHPA volume, and optimal volume of D2EHPA was 5% in this experiment. The recovery rate of IGF-I by D2EHPA was increased by the decreasing from pH 7 to pH 4 of external phase. Therefore, optimal pH value was 4.0. Optimal concentrations of sulfuric acid in internal phase, paraffin oil in oil phase and Span 80 for recovery rate of IGF-I were 0.1M, 2.0% and 5%, respectively, and optimal W/O rate was 2. These results suggested that optimal conditions for recovery of IGF-I were D2EHPA(5%) as carrier, pH 4.0, 0.1M sulfuric acid, 2% paraffin oil, 2.0 W/O rate and 5.0% Span 80.

• Membrane and Water Treatment
• /
• 제10권5호
• /
• pp.373-379
• /
• 2019

One of the real issues of the recent years is water contamination because of harmful synthetic dyes. Liquid Membranes (LM) resemble a promising alternative to the current separation processes, demonstrating various points of interest as far as effectiveness, selectivity, and operational expenses. The improvement of various Liquid Membranes designs has been a matter of examination by few researchers, particularly for the expulsion of dyes from aqueous solutions. The choice of organic surfactants plays an essential role in the efficiency of the dye removal. In LM design, the most significant step towards productivity is the decision of the surfactant type and its concentration. Liquid emulsion membrane (LEM) was used to remove safranin from aqueous solutions in which the emulsion was made with the help of D2EHPA as carrier, kerosene was used as a diluent and Span 80 (Sorbiton monooleate) was used as an emulsifying agent or surfactant. Various sorts of internal stages were utilized, to be specific sulphuric acid and sodium hydroxide. The impact of parameters influencing extraction efficiency such as pH of feed solution, concentrations of surfactant and emulsifying agent in membrane phase, volume ratio of internal phase to membrane phase, internal phase concentration, agitation speed and time of extraction were analyzed.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2001년도 가을 학술발표회 논문집
• /
• pp.219-222
• /
• 2001

Membranes which selectively transport specific metals on an industrial scale is much useful in a number of applications, such as aqueous stream purification, catalyst and recycling of the reactants, the applications in metal ion sensing and so forth. Numerous studies have been already made to use liquid, supported liquid and, emulsion liquid membranes (LM) for selective carriers for metal ion transport. (omitted)

• Membrane and Water Treatment
• /
• 제4권1호
• /
• pp.11-25
• /
• 2013

Emulsion liquid membrane (ELM) process suffers from emulsion instability problem. So far, emulsion produced by mechanical methods such as stirrer and homogenizer has big size and high emulsion breakage. This paper discussed the application of emulsion produced by sonicator to extract cadmium in a batch ELM system. The emulsions consist of N,N-Dioctyl-1-octanamine (trioctylamine/TOA), nitrogen trihydride (ammonia/NH4OH), sorbitan monooleate (Span 80), and kerosene as carrier, stripping solution, emulsifying agent, and organic diluent, respectively. Effects of comprehensive parameters on extraction efficiency of Cd(II) such as emulsification time, extraction time, stirring speed, surfactant concentration, initial feed phase concentration, carrier concentration, volume ratio of the emulsion to feed phase, and pH of initial feed phase were evaluated. The results showed that extraction efficiencies of Cd(II) greater than 98% could be obtained under the following conditions: 15 minutes of emulsification time, 4 wt.% of Span 80 concentration, 4 wt.% of TOA concentration, 15 minutes of extraction time, 250 rpm of stirring speed, 100 ppm of initial feed concentration, volume ratio of emulsion to feed phase of 1:5, and initial feed pH of 1.53.

• Korean Chemical Engineering Research
• /
• 제43권3호
• /
• pp.380-386
• /
• 2005

유기 붕산계 화합물과 4차 암모늄염의 혼합물을 추출제로 사용하여 에멀젼형 액막법에 의한 과당과 포도당의 분리가 회분식 반응기에서 이루어졌다. 당 분리를 위해 적합한 추출제와 최적의 실험조건을 찾기 위하여 각 당에 대하여 독립적으로 추출 실험이 수행되었다. 원료상의 당 농도, 붕산계 화합물 종류와 w/o 비와 같은 여러 변수들이 과당과 포도당 분리에 미치는 영향이 조사되었으며, 이때 원료상과 회수상에서의 최종 당 농도가 분석되었다. 원료상에서의 과당/포도당 추출률 비는 매우 높았지만, 회수상에서의 당 농도는 높지 않았다. 상업적인 당 분리를 위한 에멀젼형 액막 시스템 개발을 위해 보다 회수상으로 과당의 역추출을 강하게 추진할 수 있는 염을 찾는 것이 요구되었다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1994년도 추계 총회 및 학술발표회
• /
• pp.84-85
• /
• 1994

본 연구는 수용상에 포함된 중금속이온중 에멀젼 액막법(Emulsion Liquid Membranes, ELM)을 이용하여 납이온을 제거시키기 위한 연구이다. 지금까지 수용액상의 중금속 이온의 제거는 전통적으로 이온 침전법을 사용하여 왔다. 그러나 이 방법은 스럿지 처리문제가 남아 있고 식수로 이용되는 수처리에는 식수기준 만족도 때문데 적합하지 않았다. ELM법에 의한 금속이온 제거처리는 전기도금에 의하여 중금속이온을 회수할 수 있고 고도의 수처리를 가능케하여 최근 많은 관심을 갖고 있다. 본 연구에서는 납 이온 추출제로서 D2EPHA와 Alamine336의 이온교환제를 사용하여, 이 씨스테므이 추출 평형자료를 구하고 pH, 추출제의 농도, 교반속도, 에멀젼비율등에 의한 추출효과등을 검토하였다. 또한 2단계 추출 방법을 사용하여 금속이온추출에서 가장 큰 문제점인 유기상 용액의 leakage를 해결하고자 하였다.

• Bulletin of the Korean Chemical Society
• /
• 제33권5호
• /
• pp.1509-1516
• /
• 2012

Nano-assisted inclusion separation of alkali metals from basic solutions was reported by inclusion-facilitated emulsion liquid membrane process. The novelty of this study is application of nano-baskets of calixarene in the selective and efficient separation of alkali metals as both the carrier and the surfactant. For this aim, four derivatives of $p-tert-calix$[4]arene bearing different sulfonamide moieties were synthesized and their inclusion-extraction parameters were optimized including the calixarene scaffold $\mathbf{3}$ (4 wt %) as the carrier/demulsifier, the commercial kerosene as diluent in membrane, sulphonic acid (0.2 M) and ammonium carbonate (0.4 M) as the strip and the feed phases, the phase and the treat ratios of 0.8 and 0.3, mixing speed (300 rpm), and initial solute concentration (100 mg/L). The selectivity of membrane over more than ten interfering cations was examined and the results reveled that under the optimized operating condition, the degree of inclusion-extraction of alkali metals was as high as 98-99%.

• Korean Chemical Engineering Research
• /
• 제56권5호
• /
• pp.687-693
• /
• 2018

바이오매스 가수분해액으로부터 당을 정제하는 동안 발효 저해물질들의 선택적인 제거 및 회수는 목질계 바이오매스로부터 바이오 알코올을 생성하는 전체 공정의 경제적 효율성을 높일 수 있다. 이 연구에서는 에멀젼형 액막계에서 페놀화합물이 없는 모사 바이오매스 가수분해액에 있는 푸란유도체가 초산 추출에 미치는 영향이 조사되었다. 특별한 조작 조건하에서 5분내에 99%이상의 초산을 추출할 수 있었으며, 이 때 푸르푸랄과 5-hydroxymethylfurfural의 추출율은 각각 10%와 4% 내외의 값을 가졌다. 또한, 원료상에 있는 푸란유도체들의 초기 농도가 높을수록 초산의 추출속도는 낮았는데, 푸르푸랄이 5-hydroxymethylfurfural 보다 그 영향이 더 컸다. 따라서, 초산 추출 전에 가수분해액으로부터 푸르푸랄을 우선적으로 제거한다면 에멀젼형 액막법이 보다 경제성이 있는 초산 제거법이 될 것으로 보인다.

• Membrane and Water Treatment
• /
• 제6권3호
• /
• pp.237-249
• /
• 2015

In this study we investigate a laboratory scale vacuum membrane distillation system to produce pure water from model oil in water emulsion. Experimental determination of liquid entry pressure (LEP) of a commercial Durapore$^{TM}$ GVPH flat sheet membrane using model emulsions in various oil concentrations has been carried out. Two different methods of liquid entry pressure determination - a frequently used, so-called static and a novel dynamic method - have been investigated. In case of static method, LEP value was found to be 2.3 bar. No significant effect of oil content on LEP was detected up to 3200 ppm. In contrast, LEP values determined with dynamic method showed strong dependence on the oil concentration of the feed and decreased from 2.0 bar to a spontaneous wetting at 0.2 bar in the range 0-250 ppm, respectively. Vacuum membrane distillation tests were also performed. The separation performance is evaluated in terms of flux behavior, total organic carbon removal and droplet size distribution of the feed and final retentate. No significant effect of oil content on the flux was found ($5.05{\pm}0.31kgm^{-2}h^{-1}$) up to 250 ppm, where a spontaneous wetting occurred. High separation performance was achieved along with the increasing oil concentration between 93.4-97.0%.