• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.48 no.1
• /
• pp.55-64
• /
• 2022

The potassium cream soap with fatty acid called cleaning foam has a crystal gel structure, and unlike an emulsion system, it is weak to shear stress and shows characteristics that are easily separated under high temperature storage conditions. The crystal gel structure of cleansing foams is significantly influenced by the nature and proportion of fatty acids, degree of neutralization, and the nature and proportion of polyols. In order to investigate the effect of these parameters on the crystal gel structure, a ternary system consisting of water/KOH/fatty acid was investigated in this study. The investigation of differential scanning calorimeter (DSC) revealed that the eutectic point was found at the ratio of myristic acid (MA) : stearic acid (SA) = 3 : 1 and ternary systems were the most stable at the eutectic point. However, the increase in fatty acid content had little effect on stability. On the basis of viscosity and polarized optical microscopy (POM) measurements, the optimum degree of neutralization was found to be about 75%. The system was stable when the melting point (T_m) of the ternary system was higher than the storage temperature and the crystal phase was transferred to lamellar gel phase, but the increase in fatty acid content had little effect on stability. The addition of polyols to the ternary system played an important role in changing the T_m and causing phase transition. The structure of the cleansing foams were confirmed through cryogenic scanning electron microscope (Cryo-SEM), small and wide angle X-ray scattering (SAXS and WAXS) analysis. Since butylene glycol (BG), propylene glycol (PG), and dipropylene glycol (DPG) lowered the T_m and hindered the lamellar gel formation, they were unsuitable for the formation of stable cleansing foam. In contrast, glycerin, PEG-400, and sorbitol increased the T_m, and facilitated the formation of lamellar gel phase, which led to a stable ternary system. Glycerin was found to be the most optimal agent to prepare a cleansing foam with enhanced stability.

• Journal of Life Science
• /
• v.33 no.5
• /
• pp.391-396
• /
• 2023

Milk is an emulsion, improving texture of surimi mixture and able to suppress off flavors and abnormal tastes. Therefore, this study aimed to identify the effective properties of milk in the preparation of a surimi mixture for 3D printing. The sensory and physical properties of surimi mixtures containing 0%, 20 wt%, and 40 wt% milk were evaluated, where the unheated surimi mixture with added milk demonstrated increased firmness and adhesiveness compared to the negative control group. In addition, the hardness, adhesiveness, gumminess, and chewiness of the mixture containing 40% milk were highest, but springiness, cohesiveness, and resilience were lowest. In the sensory evaluation, as the amount of milk increased, a fishy smell, abnormal taste and texture improved, hardness and preference increased as well. From these results, it was confirmed that a surimi mixture can be prepared with milk to improve its physical and sensory properties for 3D printing when compared to the negative control mixture. In particular, it was revealed that the physical properties and preference of the surimi mixture are best when prepared with 40% milk.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.3
• /
• pp.247-258
• /
• 2023

This study aims to investigate the enhancement of water resistance and improvement in adhesion to the skin by combining dextrin palmitate and isopropyl titanium triisostearate coating materials with titanium dioxide. Due to the recent increase in consumers who enjoy outdoor activities, the demand for sunscreen with excellent water resistance is increasing. Prior research was conducted with O/W, Pickering, and W/O/W multiple formulations, but there was a limit to water resistance. The purpose of this study is to develop a complex inorganic powder that can improve water resistance and increase adhesion to the skin to solve this problem. First, we combined dextrin palmitate and isopropyl titanium triisostearate coating materials to form a composite with titanium dioxide. The coating of the inorganic powder was confirmed using FE-SEM and FT-IR analysis. The composite exhibited significantly higher in vitro water resistance compared to other formulations. The hydrophobicity of the coated inorganic powder was compared by measuring the contact angles. When the coated inorganic powder was applied to the W/O sunscreen formulation and the non-coated inorganic powder was applied to the W/O sunscreen formulation as a control, the SPF of the sunscreen containing the coated inorganic powder was higher. These results were the same when observed with a UV camera. Finally the adhesion of the coated inorganic powder to the skin was assessed by applying it to a foundation product. In vivo study, it was observed that the product formulated with the coated powder exhibited less smudging compared to the foundation product formulated with the non-coated powder. The developed inorganic powder in this study demonstrated excellent adhesion to the skin, providing a superior sensory experience, as well as enhanced hydrophobicity and remarkable water resistance effects. In the future, the result of this study is expected to help develop various sunscreen products to improve water resistance.

• Journal of Life Science
• /
• v.33 no.11
• /
• pp.905-914
• /
• 2023

To evaluate the effectiveness of the skin barrier improvement of lactic acid (LA) and gluconolactone (GL), the expression of filaggrin, loricrin, hyaluronic acid (HA), hyaluronan syhthase-2 (HAS2), and aquaporine-3 (AQP3) in keratinocytes, and the moisture content and transepidermal water loss (TEWL) by clinical trials were evaluated. The expression levels of filaggrin and locricrin, which are the main factors affecting the proper functioning of skin barrier function, and HA, HAS2, and AQP3, which are skin moisturizing-related proteins measured by quantitative real-time polymerase chain reaction (qRT-PCR) and western blotting. The results showed that the expression levels of the factors that decreased by H2O2 treatment were significantly increased by LA, GL, and a mixture of LA and GL at the mRNA and protein levels (p<0.05). The nanoemulsion containing a mixture of LA and GL was prepared using the emulsion inversion method, and the average particle size was 299.9 ± 0.287 nm. After measuring the TEWL of nanoemulsion using Vapometer, it was found that TEWL significantly decreased by 15.53% and 26.73% after two weeks and four weeks of product use, respectively, compared to TEWL before product use (p<0.001). Similarly, the skin moisture content of the nanoemulsion significantly increased by 15.40% and 26.59% after two weeks and four weeks of product use, respectively, compared to skin moisture content before product use (p<0.001). Therefore, the skin barrier function and moisturizing effect of a mixture of LA and GL are shown by increasing the moisture content and decreasing the TEWL by increasing the expression of filaggrin, loricrin, HA, HAS2, and AQP3. This suggests the possibility for the development of functional cosmetic ingredients in the future.

• Korean Journal of Weed Science
• /
• v.4 no.1
• /
• pp.79-87
• /
• 1984

Herbicidal effects of alachlor to peanuts were observed under different formulations (granule containing 5.0% a.i. and emulsifiable concentrate containing 43.7% a.i.) and levels (granule with 3 and 6kg/l0a and emulsion with 300㏄/l0a) with the transparent polyethylene (P.E.) film mulching. Formulations and levels of alachlor did not affect emergence ratio, time of emergence and flowering, and early growth of peanuts such as the number of leaves and branches, length of branches; and shoot dry weight at 20 and 40 days after planting, but early growth was enhanced by P.E. film mulching. At harvest, weed dry weight was positively correlated with length of branches, but negatively correlated with the number of branches and shoot dry weight. Acalyphu australis and Chenopodium album were not effectively controlled by the application of alachlor and growth of C. album was retarded under P.E. film mulching. Portulaca oleracea and Digitaria sanguinalis were effectively controlled by alachlor, but they were not affected by P.E. film mulching. At harvest, D. sanguinalis, A. australis, and Echinochloa crus galli were predominant weeds in all treatments; persistence of alachlor may not be long enough to control even sensitive weeds to alachlor such as D, sanguinalis in the field of peanuts of which canopy development was relatively slow. Weed dry weight at harvest was negatively correlated with the number of pods and grain yield of peanuts. Among the yield components only the number of nods per plant was positively correlated with grain yield. Hana weeding after July 1 increased grain yield of Peanuts even in alchlor applied plots.

• Korean journal of applied entomology
• /
• v.9 no.2
• /
• pp.57-74
• /
• 1970

These experiments were conducted to investigate the :actors influencing the systemic action of Dimethoate (O,O-dimethyl-S-(N-methylcarhamoylmethyl) photphorodithioate) to rice seeds and the phytotoxic effects on the seed germination. Dimethoate $(Roxion^{(R)})$ $40\%$ emulsion was used. The varieties tested were Jinheung. Nongkwang,Suwon #82, Norm #6, Paltal, Shirogane, Suseong, Pungkwang, Shin #2, Fujisaka #5, Kwanok, and Jaekeun. The permeated Dimethoate was extracted from the treated seeds by chloroform and quantities were determined by Spectrophotometer. The phytotoxicity was evaluated from the effects on the germination of the treated seeds which were kept in an incubator. The oxygen consumption was measured by Warburg Manometer at $30^{\circ}C$ for 60 minutes. Indices of KOH disintegration of seeds and chemical composition of the seeds were also determined. The results obtained were as followings; 1) The amount of permeated Dimethoate in the seeds showed remarkable differences with varieties. The amount of Dimethoate per 100 grains was greater as in the ascending order of Suseong, Kwanok, Nongkwang, Jinheung, Paltal, Fujisaka #5, Suwon #82, Norm #6, Shirogane, Shin #2, Pungkwang and Jaekeun. 2) It was observed that the total amount of Dimethoate in the seeds(mg./100 grains) were greater among the varieties with large grain than those with small grains, while reverse cases were true in the amount of Dimethoate in a gramme of seeds, probably because of the greater surface areas In a small grains for a gramme weight. 3) There was no significant correlation between the permeated amount of Dimethoate and amount of absorbed water by the seeds when the seeds were treated with $0.1\%$ Dimethoate for 24 and 48 hours. 4) The permeability of Dimethoate to seeds significantly increased in the prolonged soaking periods, higher concentration, and higher temperature. 5) When the seeds were treated with $0.1\%$ Dimethoate for 24 and 48 hours at $15^{\circ},\;20^{\circ},\; 20^{\circ},\; and \;30^{\circ}C$, the permeated amount of Dimethoate were increased at higher temperature. It seems to be that the more active penetration of Dimethoate was involved at the higher temperature. 6) The phytotoxic effects of Dinethoate on the seed germination varied with the varieties. An descending order of varietal tolerance of seeds was as followings: Jinheung, Fujisaka #5, Suwon #82, Paltal, Nongkwang, Jaekeun, Shin #2, Kwanok, Shirogane, Pungkwang, Suseong, and Norm #6. 7) There was a positive correlation between the amount of Dimethoate permeated into the seeds (mg./gram. of seeds) and phytotoxicity of seeds. 8) The Phytotoxic effects of Dimethoate showed close correlation with the degree of KOH disintegration of seeds, average germination periods, and oxygen respiration of seeds. 9) It was observed that higher protein contents of the seeds decreased the phytotoxic effects of Dimethoate. 10) Relatively high negative correlation between the degree of KOH disintegration of seeds and crude protein content of the seeds was observed. 11) The average germination period was delayed for about 2 days when the seeds were treated with $0.2\%$ Dimethoate for 24 hours at $30^{\circ}C$. 12) The oxygen consumption of the seeds treated with $0.2\%$ Dimethoate for 24 hours at $30^{\circ}C$ was greatly decreased when compared with that of the normal seeds. 13) The amount of oxygen consumption of the seeds (in 24 hours after 24 hours water soaking) was negatively correlated with the average germination periods of the seeds.

• Explosives and Blasting
• /
• v.9 no.1
• /
• pp.3-13
• /
• 1991

The cautious blasting works had been used with emulsion explosion electric M/S delay caps. Drill depth was from 3m to 6m with Crawler Drill ${\phi}70mm$ on the calcalious sand stone (soft -modelate -semi hard Rock). The total numbers of test blast were 88. Scale distance were induced 15.52-60.32. It was applied to propagation Law in blasting vibration as follows. Propagtion Law in Blasting Vibration $V=K(\frac{D}{W^b})^n$ were V : Peak partical velocity(cm/sec) D : Distance between explosion and recording sites(m) W : Maximum charge per delay-period of eight milliseconds or more (kg) K : Ground transmission constant, empirically determind on the Rocks, Explosive and drilling pattern ets. b : Charge exponents n : Reduced exponents where the quantity $\frac{D}{W^b}$ is known as the scale distance. Above equation is worked by the U.S Bureau of Mines to determine peak particle velocity. The propagation Law can be catagorized in three groups. Cubic root Scaling charge per delay Square root Scaling of charge per delay Site-specific Scaling of charge Per delay Plots of peak particle velocity versus distoance were made on log-log coordinates. The data are grouped by test and P.P.V. The linear grouping of the data permits their representation by an equation of the form ; $V=K(\frac{D}{W^{\frac{1}{3}})^{-n}$ The value of K(41 or 124) and n(1.41 or 1.66) were determined for each set of data by the method of least squores. Statistical tests showed that a common slope, n, could be used for all data of a given components. Charge and reduction exponents carried out by multiple regressional analysis. It's divided into under loom over loom distance because the frequency is verified by the distance from blast site. Empirical equation of cautious blasting vibration is as follows. Over 30m ------- under l00m ${\cdots\cdots\cdots}{\;}41(D/sqrt[2]{W})^{-1.41}{\;}{\cdots\cdots\cdots\cdots\cdots}{\;}A$ Over 100m ${\cdots\cdots\cdots\cdots\cdots}{\;}121(D/sqrt[3]{W})^{-1.66}{\;}{\cdots\cdots\cdots\cdots\cdots}{\;}B$ where ; V is peak particle velocity In cm / sec D is distance in m and W, maximLlm charge weight per day in kg K value on the above equation has to be more specified for further understaring about the effect of explosives, Rock strength. And Drilling pattern on the vibration levels, it is necessary to carry out more tests.

• Radiation Oncology Journal
• /
• v.18 no.2
• /
• pp.133-137
• /
• 2000

Purpose :To investigate whether combined beta-carotene with X-Irradiation has more enhanced radition response than X-irradiation or not, we peformed a experiment about in vitro cytotoxlcity of beta-carotene and/or X-irradiation in the fibrosarcoma cells, tumor growth delay of combined beta-caroten with/or X-irradiation in the mouse fibrosarcoma. Materials and Methods : 2$\%$ emulsion of beta-carotene was serially diluted and used. X-Irradiation was given by 6 MeV linear accelerator. The cytotoxicity of beta-carotene in vitro was evaluated from clonogenic assay. To compare the cytotoxiclty between combined beta-carotene with X-irradiation and X-irradiation group, 2 mg/ml of beta-carotene was contacted to fibrosarcoma (FSall) cells for 1 hour before X-irradiation. For the tumor growth delay, single 20 Gy was given to FSall tumor hearing C3H/N mice whic was classified as beta-crotene with X-irradiation group (n=5) and X-irradiation alone group (n=5). 0.2 ml of 20 mg/kg of beta-carotene were i.p. injected to mice 30 minute before X-irradiation in the beta-crotene with X-irradiation group. The tumor growth delay defined as the time which reach to 1,000 mm$^{3}$ of tumor volume. Results : (1) Cytotoxicity in vitro: 1) survival fraction at beta-carotene concentration of 0.002,0.02,0.2 and 2 mg/ml were 0.69$\pm$0.07, 0.59$\pm$0.08, 0.08$\pm$0.008 and 0.02$\pm$0.006, respectively. 2) each survival fraction at 2, 4, 6 and 8 Gy in the 2 mg/ml of beta-carotene + X-irradiation group were 0.13$\pm$0.05, 0.03$\pm$0.005, 0.01 $\pm$0.002 and 0.009$\pm$0.0008, respectively. But each survival fraction at same irradiation dose in the X-irradiation group were 0.66$\pm$0.05, 0.40$\pm$0.04, 0.11$\pm$0.01 and 0.03$\pm$0.006, respectively(p<0.05). (2) The time which reach to 1,000 mm$^{3}$ of tumor volume of beta-carotene + X-irradiation group and X-irradiation alone group were 18, 19 days, respectively(p>0.05) Conclusion : The contact of beta-caroten to Fsall cells showed mild cytotoxicity which 띤as increased according to concentration. The cytotoxicity of combined beta-carotene with X-irradiation more increased than that of X-irradiation, additionally, And there was significant difference of cytotoxicity between two groups. But there were no significant difference of the growth delay of fibrosarcoma between two groups.