• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.E2
• /
• pp.39-46
• /
• 2007

In order to present the scientific information of organic emissions from consumer products available, the current study examined the emissions composition for three different types of consumer products being used in Korea in an environmental chamber: air freshener (AF), mosquito repellents (MSQR), and moth repellents (MTHR). Emission rates were evaluated by determining emission rates of the target compound from the selected products using an electropolished stainless steel (SS) test chamber $(40{\times}25{\times}50cm^3)$. A time-dependent empirical relationship developed in this study agreed well with the test results. As same with the emission concentrations, MSQR exhibited the highest emission rate for all target compounds except for limonene and naphthalene. MTHR ($9,200\;{\mu}g\;h^{-1}$) showed the highest emission rate of naphthalene followed by MSQR ($8,300\;{\mu}g\;h^{-1}$). Moreover, the concentrations in residential bedroom conditions for target compounds emitted from three types of consumer products were estimated. This estimation suggests that the uses of consumer products can elevate indoor levels of target compounds. In particular, any types of the consumer products may increase the indoor level of m, p-xylene.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.4
• /
• pp.19-28
• /
• 1999

In order to control thermal deformation of the machine origin of machine tools a empirical model and a compensation system have been developed, Prior to empirical modeling the volumetric error considering shape errors and joint errors of slides is formulated through the homogeneous transformation matrix (HTM) and kinematic chain. Simulation results of the HTM method show that the thermal error of the machine origin is more critical than position-dependent errors. In order to make a stable and effective software error compensation system the GMDH (Group Method of Data Handling) models are constructed to estimate the thermal deformation of the machine origin by measuring deformation data and temperature data. A test bar and gap sensors are used to measure the deformation data. In order to compensate the estimated error the work origin shift method is developed by implementing a digital I/O interface board between a CNC controller and an IBM PC. The method shifts the work origin as much as the amounts which are calculated by the pre-established thermal error model. The experiment results for a vertical machining center show that the thermal deformation of the machine origin is reduced within $\pm$5$mu extrm{m}$.

• Journal of computational fluids engineering
• /
• v.20 no.2
• /
• pp.16-22
• /
• 2015

The pressure is generally lower than that of the freestream at the base of a missile body due to the energy loss by the flow separation around the edge of the base. The base pressure changes in the presence of the thrust jet due to the interaction between the base flow of the missile and the jet flow. In this study, behavior of the missile base pressure by the change of the jet exit pressure and the freestream condition is investigated using the CFD(Computational Fluid Dynamics) method. Effects of the grid type and the freestream condition are tested. The results are compared with the semi-empirical predictions and the flight test data. The CFD results agree well with the flight test data. The semi-empirical predictions overestimate the base pressure when jet thrust is strong for low freestream speed.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.2
• /
• pp.28-36
• /
• 2009

Many researches have been done to define the physical parameters for the wave generation and transformation over a coastal region. However, most of these have been limited to the application of particular conditions, as they are generally too empirical. To yield more reasonable wave estimation using a spectral wave model, it is important to understand how they work for the wave estimation. This study involved a comprehensive sensitivity test against the spectral resolution and the physical source/sink terms of the spectral wave model using SWAN and TOMAWAC, which have the same physical background with several different empirical/theoretical formulations. The tests were conducted for the East Anglian coast, UK, which is characterized by a complex bathymetry due to several shoals and offshore sandbanks. For the quantitative and qualitative evaluation of the models' performance with different input conditions, the wave elements and spectrums predicted at representative sites the East Anglia coast were compared/analyzed. The spectral resolution had no significant effect on the model results, but the lowest resolution on the frequency and direction induced underestimations of the wave height and period. The bottom friction and depth-induced breaking terms produced relatively high variations in the wave prediction, depending on which formulation was applied. The terms for the quadruplet and whitecapping had little effect on the wave estimation, whereas the triads tended to predict shorter and higher waves by energy transferring to higher frequencies.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.4
• /
• pp.845-852
• /
• 2015

The runup height is an important design parameter to determine the crest elevation of coastal structures and seawalls. In this study, two dimensional wave runup tests for rubble-mound structure covered by tetrapods were conducted. Incident waves at the toe include nonbreaking, breaking and broken random wave conditions. A empirical formula to predict runup elevation of rubble-mound structure with 1:1.5 front slope was proposed on the basis of physical model test results using a surf similarity parameter. The test results from this study were compared with those from van der Meer and Stam(1992).

• International Journal of Highway Engineering
• /
• v.15 no.3
• /
• pp.45-52
• /
• 2013

PURPOSES : This study is to construct the regression models of drainage asphalt concrete specimens and to provide the appropriate coefficients of hydraulic conductivity prediction models. METHODS: In terms of easy calculation of the hydraulic conductivity from porosity of asphalt concrete pavement, the estimation model of hydraulic conductivity was proposed using regression analysis. 10 specimens of drainage asphalt concrete pavement were made for measurement of the hydraulic conductivity. Hydraulic conductivity model proposed in this study was calculated by empirical model based on porosity and the grain size. In this study, it shows the compared results from permeability measured test and empirical equation, and the suitability of proposed model, using regression analysis. RESULTS: As the result of the regression analysis, the hydraulic conductivity calculated from the proposal model was similar to that resulted from permeability measured test. Also result of RMSE (Root Mean Square Error) analysis, a proposed regression model is resulted in more accurate model. CONCLUSIONS: The proposed model can be used in case of estimating the hydraulic conductivity at drainage asphalt concrete pavements in fields.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.30 no.4
• /
• pp.15-25
• /
• 2005

As implied by the terms of IT productivity Paradox, measuring the Information technology contribution to economic performance has been one of the challenging issues to both policy makers and business professionals. As such, diverse attempts with sophisticate analyses have been reported in the literature to analyze the effect of IT contributions. In this paper, we follow Growth Accounting Method to measure the IT contribution effect to manufacturing firm's economic performance in Korea. Various regression methods and statistical analyses are applied with fourteen years of industry Panel data. Using the Cobb-Douglas function, time lag analysis is made to understand IT effect to economic growth. Instead of capturing data from individual firm, industry level data from the National Statistics Bureau is used for IT capital, non-IT capital, and so on. Statistical analysis following the panel unit test and Panel co-integration test was performed to reveal the exact effect of IT contribution to economic performance. Empirical testing results for non-stationary nature of IT investment effect are reported as well as IT contribution to manufacturing industry's economic performance.

• Knowledge Management Research
• /
• v.16 no.2
• /
• pp.47-66
• /
• 2015

Due to multiple information sources, external information search(EIS) is the key issue on smart tourism environments. EIS is more important on experiential goods such as exhibition and convention. Despite the increasing importance of EIS, very little is known about what is the more effective information source in this area. In this paper, we attempt to examine the relations of satisfaction and between both online and offline information. This research analyzes an empirical model including EIS, affective involvement, perceived usefulness, satisfaction to student visitors on exhibition experience. Hence, six hypotheses are developed to test the relations of EIS and satisfaction using the mediating effects of affective involvement. Specifically, we developed a research model by employing the Uses and Gratification(U&G) framework and tested it to understand how student visitors' involvement and satisfaction might be changed according to EIS. Survey data was collected from 203 student visitors on "2014 Expo KCCE" was used to test the model using structural equation modeling. The implications of our empirical findings for both research and practice are discussed.

• Nuclear Engineering and Technology
• /
• v.31 no.6
• /
• pp.548-560
• /
• 1999

An experimental investigation has been peformed to examine the effects of various geometrical parameters and an initial operating condition on the air-water countercurrent How limitation (CCFL) in a simulated PWR hot leg. A total of 118 experimental data for the onset of CCFL and zero liquid penetration were obtained for various combinations of test parameters. It was observe that the CCFL can be classified into three different categories: (the onset of CCFL, (the partial liquid delivery, and (r) the zero liquid penetration. The observed mechanisms of the onset of CCFL were different depending on the inlet water flow rate. The parametric effects of pipe diameter, horizontal pipe length, horizontal pipe length-to-diameter (L/D) ratio, and initial water level in the horizontal pipe of the test section on the onset of air-water CCFL were also examined. An empirical correlation for the onset of CCFL in a horizontal pipe connected to an inclined riser was developed in terms of Wallis flooding parameters for the low inlet water flow rate region. Comparisons of the present empirical correlation with the air-water CCFL data of large pipe diameters show that the present correlation agrees more closely with the experimental data than the existing CCFL correlations.

• Asian Journal of Innovation and Policy
• /
• v.6 no.3
• /
• pp.313-331
• /
• 2017

This paper exhibits the concept of Triple Helix model to explain and link university-industry-government (Triple Helix) connections to national innovation systems theory. The driver of this paper is to test the dynamics of Triple Helix concept under national innovation system in the Association of South East Asian Countries (ASEAN)-5 economies. Panel econometric analysis with cross-sectional dependence (CD) test is applied to investigate the relationship amongst Triple Helix variables. The empirical analysis employs innovation indicators of five founding ASEAN countries namely Malaysia, Indonesia, Singapore, the Philippines and Thailand for the period of 2000-2015 from an existing WDI and WCY database. Econometric results support the two research questions of this study; firstly, there is a significant relationship between innovation outcome and its key drivers under Triple Helix context of National Innovation System in ASEAN-5 economies; secondly, the extent of the relationship among government R&D expenditure with high-tech productions are positive and significant while new ideas coming from universities as scientific publications and high-tech production have positive relationship but not significant yet in ASEAN-5 countries. Overall labor productivity is positive and significant with innovation outcomes in ASEAN-5.