• 한국건설관리학회논문집
• /
• 제14권5호
• /
• pp.3-11
• /
• 2013

정부에서는 국가정책 아젠다인 '저탄소 녹색성장'을 실현시키기 위한 노력들을 전산업부문에 걸쳐 진행하고 있다. 건설산업 부문도 예외가 아니어서 에너지 및 온실가스 배출저감을 위한 기술개발이 활발히 이루어지고 있으며 특히, 건축물은 국가 총에너지소비의 20% 이상을 차지하고 있어 주거건물의 에너지 효율화 및 이산화탄소 배출량 저감은 국가적으로 시급한 과제라 할 수 있다. 또한 최근 사회적으로 이슈화되고 있는 주택전세난으로 서민들의 고통이 가중되고 있어, 시장수요에 능동적으로 신속하게 대응할 수 있는 주택생산시스템이 요구되고 있다. 이에 본 연구에서는 친환경적이고 시공 효율성을 극대화시킬 수 있는 시스템을 구축하기 위해 국내 유닛 모듈러 주택생산체계를 조사 분석하여 문제점을 찾아내고 이에 대한 개선안을 제시함으로써 유닛 모듈러 주택의 활성화 기반을 위한 제시하고자 한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.1077-1080
• /
• 2002

Present status of diagnostics and simulations on microplasmas for understandings of the discharge and VUV emission characteristics in a unit cell of plasma display panel is overviewed and their future perspective will be argued towards potential improvement of the characteristics.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 2001년도 춘계 학술발표회 논문집
• /
• pp.27-32
• /
• 2001

• 천문학회지
• /
• 제29권spc1호
• /
• pp.171-172
• /
• 1996

We present the results of an rocket-borne observation of far-infrared [CII] line at 157.7 ${\mu}m$ from the diffuse inter-stellar medium in the Ursa Major. We also introduce a part of results on the [CII] emission recently obtained by the IRTS, a liquid-helium cooled 15cm telescope onboard the Space Flyer Unit. From the rocket-borne observation we obtained the cooling rate of the diffuse HI gas due to the [CII] line emission, which is $1.3{\pm}0.2 {\times} 10^{-26}$ $ergss^{-1} H^{-1}_{atom}$. We also observed appreciable [CII] emission from the molecular clouds, with average CII/CO intensity ratio of 420. The IRTS observation provided the [CII] line emission distribution over large area of the sky along great circles crossing the Galactic plane at I = $50^{\circ}$ and I = $230^{\circ}$. We found two components in their intensity distributions, one concentrates on the Galactic plane and the another extends over at least $20^{\circ}$ in Galactic latitude. We ascribe one component to the emission from the Galactic disk, and the another one to the emission from the local interstellar gas. The [CII] cooling rate of the latter component is $5.6 {\pm} 2.2 {\times}10$.

• 항공우주기술
• /
• 제6권1호
• /
• pp.173-181
• /
• 2007

단위 장비 수준에서 시스템 수준에 이르기까지 통제되는 KSLV-I 2단부의 복사성 방사/감응 특성은 탑재되는 위성, 발사체 1단부, 그리고 우주센터에 설치되고 운용되는 지상장비 및 외부 통신망의 정상동작을 보장하기 위하여 전 주파수 대역에 대해 시험 및 관리되어야 한다. KSLV-I과 하부시스템에서 방사되는 비의도성 잡음은 각각의 요구규격에 정의된 제한치 보다 작도록 제한되어야 할 뿐만 아니라 시스템의 특성을 정확히 검증하기 위한 적절한 시험 및 평가 방법도 개발되어야 한다. 본 논문에서는 KSLV-I 2단부 엔지니어링 모델의 전자파적합성 확보를 위해 도출된 복사성 방사와 복사성 감응에 대한 시험규격, 측정방법 그리고 시험 결과가 제시된다.

• 한국수소및신에너지학회논문집
• /
• 제8권2호
• /
• pp.91-97
• /
• 1997

The goals of this research are to understand the $NO_x$ emission in direct injected diesel engine with premixed hydrogen fuel. Hydrogen fuel was supplied into the test engine through the intake pipe. Amount of hydrogen-supplemented fuel was 70 percent basis heating value of the total fuel. The effects of intake air temperature on $NO_x$ emission were studied. The intake air temperature was controlled by flow rate of liquid nitrogen. The major conclusions of this work include : (i) the tested engine was run without backfire under 70 percent hydrogen fuel supplemented. (ii) radicals of nitrogen gas in the intake pipe were increased by 30 percent and cylinder gas temperature was decreased by 24 percent as the intake air temperature were changed from $23^{\circ}C$ to $0^{\circ}C$ ; and (iii) $NO_x$ emission per unit heating value of supplied fuel was decreased by 45 percent with same decrease of intake air temperature.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.13-16
• /
• 2008

Solid oxide fuel cell(SOFC) is an electrochemical energy conversion system with high efficiency and low-emission of pollution. In order to reduce the operating temperature of SOFC system under $800^{\circ}C$, the thickness reduction of YSZ electrolyte to be as thin as possible, e.g., less than 10 ${\mu}m$ are considered with the microstructure control and optimum design of unit cell. Methods for reducing the thickness of YSZ electrolyte have been investigated in coin cell. Moreover, a large unit cell($8cm{\times}8cm$) for SOFC was fabricated using an anode-supported electrolyte assembly with a thinner electrolyte layer, which was prepared by a tape casting method with a co-sintering technique. we studied the design factors such as active layer, electrolyte thickness, cathode composition, etc,. by the coin type of unit cell ahead of the fabrication process of a large unit cell and also reviewed about the evaluation technique of a large size unit cell such as interconnect design, sealing materials and current collector and so forth. Electrochemical evaluations of the unit cells, including measurements such as power density and impedance, were performed and analyzed. Maximum power density and polarization impedance of coin cell were 0.34W/$cm^2$ and $0.45{\Omega}cm^2$ at $800^{\circ}C$, respectively. However, Maxium power density of a large unit cell($5cm{\times}5cm$) decreased to 0.21W/$cm^2$ at $800^{\circ}C$ due to the increase of ohmic resistance. However, It was found that the potential value of a large unit cell loaded by 0.22A/$cm^2$ showed 0.76V at 100hrs without the degradation of unit cell.

• Bulletin of the Korean Chemical Society
• /
• 제32권spc8호
• /
• pp.3045-3050
• /
• 2011

The synthesis of copolymers containing thiophene and benzimidazole unit by Stille polymerization is reported. The polymers with many unsubstituted thiophene units in the backbone have been reported to show low solubility, which has been a problem for spin-coating for the device fabrication. In dihexyl-2H-benzimidazole, the sulfur at 2-position of BT unit was replaced with dialkyl substituted carbon, while keeping the 1,2-quinoid form, to improve the solubility of the polymers. The PL emission spectra of the PHBIT1, PHBIT2 and PHBIT3 in chloroform solutions show maximum peaks at 500~561 nm. In thin films, maximum peaks of the PHBITs appeared at 529, 562 and 569 nm, respectively. The EL emission maxima of the PHBIT1 and PHBIT2 appear at around 588 and 576 nm, respectively. The current density and maximum luminescence of the LED with the configuration of ITO/PEDOT/ PHBIT2/Ca/Al are 552 mA/$cm^2$ and 46 cd/$m^2$, respectively.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1288-1293
• /
• 2007

The present study covers the design and analysis of a thermionic scanning electron microscope (SEM) column. The SEM column contains an electron optical system in which electrons are emitted and moved to form a focused beam, and this generates secondary electrons from the specimen surfaces, eventually making an image. The electron optical system mainly consists of a thermionic electron gun as the beam source, the lens system, the electron control unit, and the vacuum unit. In the design process, the dimension and capacity of the SEM components need to be optimally determined with the aid of finite element analyses. Considering the geometry of the filament, a three-dimensional (3D) finite element analysis is utilized. Through the analysis, the beam emission characteristics and relevant trajectories are predicted from which a systematic design of the electron optical system is enabled. The validity of the proposed 3D analysis is also discussed by comparing the directional beam spot radius. As a result, a prototype of a thermionic SEM is successfully developed with a relatively short time and low investment costs, which proves the adoptability of the proposed 3D analysis.

• 한국산학기술학회논문지
• /
• 제13권6호
• /
• pp.2428-2434
• /
• 2012

본 논문은 제동 시스템에서 전자식 주행안정 제어장치(ESC)의 유압 모듈레이터의 솔레노이드 밸브 제어에 대한 것이다. ESC의 전자제어유니트(ECU)를 제어하기 위한 방법으로 고주파수 제어와 슬로프 제어를 적용하였으며, 서지 압력 및 전자파간섭(EMI) 저감 특성을 연구하였다. 고주파수에서의 전자파 방출을 줄이기 위하여 ECU 출력 단에 슬로프 제어 기능을 추가하였다. 측정결과 제동 시스템에서 고주파수 ECU의 솔레노이드 밸브제어 방법에 따라 서지 압력과 전자파 방출이 저감될 수 있음을 확인하였다. 결론적으로 고주파수 ECU 제어 연구 결과에 의해 제동 시스템 성능을 향상방안을 제시하고자 한다.