• 제목/요약/키워드: Emission gas level

검색결과 367건 처리시간 0.023초

커먼레일 단기통 엔진에서 GTL 연료의 분사시기 변화에 따른 배출물 특성 (An Experimental Study on the Emission Characteristics of GTL Fuel with Injection Timings in CRDi Single Cylinder Engine)

  • 김병준;이용규;최교남;정동수;차경옥
    • 한국자동차공학회논문집
    • /
    • 제16권1호
    • /
    • pp.181-187
    • /
    • 2008
  • Recently, alternative fuels are drawing more attentions due to the increasing need for lower emission characteristics and fuel consumption rate in automotive engines. The GTL(gas to luquid) is the one of most favored candidates. It has higher cetane number(more than 75) and almost negligible sulphur and aromatic contents. Therefore, enhanced emission characteristics are expected even in the application in diesel engines without any modification. In this study, the cylinder pressure and heat release, emission characteristics with fuel injection timings are compared between diesel and GTL fuel in the single cylinder diesel engine. Noticeable reduction in PM, THC and CO emission are observed due to lower sulphur and aromatic contents in GTL. Also, the ignition delay decreased due to higher cetane number of GTL, which slightly decreased the amount of NOx emissions. With the retards of main injection timing, NOx decreases more for the case of GTL, while the level of THC and CO emissions still remains lower than the case of diesel. Therefore, there is much room for the control of injection timing for NOx reduction without sacrificing THC and CO emissions. With the retards of main injection timing, Small size distribution of PM became lager and there amount increased. But from all conditions, size distribution of PM for the case GTL was lower than Diesel.

고효율 저공해 열병합발전 하이브리드 시스템 개발 (Development of High Efficiency and Low Pollutant Cogeneration Hybrid System)

  • 최재준;김혁주;정대헌;박화춘
    • 대한설비공학회:학술대회논문집
    • /
    • 대한설비공학회 2008년도 하계학술발표대회 논문집
    • /
    • pp.1031-1035
    • /
    • 2008
  • The importance of the more efficient cogeneration system is emphasized. Also the more clean energy is needed at recent energy system. The cogeneration system using Lean burn engine is more preferred to the system using Rich burn engine because of the electrical efficiency. Although the cogeneration system using Lean burn engine is economically preferred, because of the NOx emission level, the system using Rich burn engine with 3-way catalyst can only be used in Korea. The NOx regulation level is 50ppm at oxygen level 13%. The cogeneration hybrid system is consist of Lean burn gas engine, afterburner, boiler, economizer, DeNOx catalyst, combustion catalyst, absorption chiller, cooling tower and grid connection system. The system was accurately evaluated and the result is following ; 90% total efficiency, below 10ppm NOx, 50ppm CO, 25ppm UHC. The cogeneration hybrid system can meet the NOx level and exhaust gas regulation. It can achieve the clean combustion gas and efficient cogeneration system.

  • PDF

우리나라를 포함한 OECD 국가의 온실가스감축 의무부담에 대한 연구 (Analysis of Greenhouse Gas Emissions Allocation Schemes for OECD Countries)

  • 조용성;강윤영
    • 환경정책연구
    • /
    • 제5권1호
    • /
    • pp.1-23
    • /
    • 2006
  • 한국을 포함한 OECD 국가들을 대상으로 3가지 의무부담 분담공식을 이용하여 12가지 시나리오를 설정한 후, 2000년도를 기준으로 각 국가가 시나리오에 따라 할당받게 되는 온실가스 감축의 무량과 감축비율, 그리고 전체 OECD 국가의 온실가스 감축량 중 각 국가의 감축비율 등을 비교 분석하였다. 분석 결과, 시나리오와 의무부담방식에 따라 다르지만 전체적으로 우리나라의 의무감측량이 일부 국가를 제외한 여타 OECD 국가와 비슷하게 나타났으며, OECD 국가 총 감축량의 약 1.4-3.5%에 해당하는 34.9-85.8백만 톤을 할당받을 것으로 예측되었고 이는 2000년도 우리나라 온실가스 총 배출량의 약 8.1-19.8%에 해당하는 것으로 분석되었다.

  • PDF

대형디젤엔진 배출가스 저감을 위한 DPF의 재생특성 연구 (A Study on Characteristics of DPF for Heavy-duty Diesel Engine on Pollutant Emission Reduction)

  • 엄동섭;이승호;오상기
    • 동력기계공학회지
    • /
    • 제12권5호
    • /
    • pp.34-39
    • /
    • 2008
  • The combustion purpose of diesel engine is to reduce the emission of green gas and to produce high output. Generally, the regulation matter of emission gas is largely diveded by 'THC', 'NOx', 'CO' and 'PM'. Among those matters, the most problem is to disgorge into 'PM', the character of diesel combustion. Diesel PM can be controlled using Diesel Particulate Filter, which can effectively reduce the level of soot emissions to ambient background levels. $NO_2$ generated by the DOC is used to combust the carbon collected in the DPF at low temperature. To certificate DPF device that is suitable to domestic circumstances, it is necessary to exactly evaluate the DPF devices according to the regulation of DPF certificate test procedure fur retrofit. To do carry out the above-mentioned description the understanding of that regulation like the standard of PM reduction is needed. In this study the test procedure including test cycle and BPT test condition was examined, and also the test result for specific DPF was analyzed. In every test like field test, PM reduction efficiency test and Seoul-10 mode test, no defect was showed.

  • PDF

건축물 생애과정에서의 이산화탄소 배출량 계산 프로세스에 관한 연구 (A Study on the Calculation Process of Carbon Dioxide Emission for Buildings with Life Cycle Assessment)

  • 정영선;허정호
    • 한국태양에너지학회 논문집
    • /
    • 제31권1호
    • /
    • pp.23-30
    • /
    • 2011
  • International cooperation to reduce greenhouse gas emissions is expected to provide a big crisis and a great opportunity at the same time for our industry that heavily consumes energy. To cope actively with the international environmental regulation, such as the Framework Convention on Climate Change, quantitative measurement of the volume of greenhouse gases emitted by various industries and quantitative prediction of the greenhouse gas emissions of the future are becoming more important than anything else at the national level. This study aims to propose the calculation process of carbon dioxide($CO_2$) emission for building in life cycle. This paper describes and compares 9 different tool for environmental load estimation with LCA. This study proposed the calculation process for quantitatively predicting and assessing $CO_2$ emissions during the life cycle of buildings based on the life cycle assessment(LCA). The life cycle steps of buildings were divided into the design/supervision, new construction, repair, renovation, use of operating energy in buildings, maintenance, and reconstruction stage in the life cycle inventory analysis and the method of assessing the environmental load in each stage was proposed.

중잔사유 가스화 복합발전 사이클의 성능 및 환경배출 해석 (Analysis on the Performance and the Emission of the Integrated Gasification Combined Cycle Using Heavy Oil)

  • 이찬;윤용승
    • 에너지공학
    • /
    • 제10권3호
    • /
    • pp.188-194
    • /
    • 2001
  • 정유공장으로부터 발생하는 중잔사유를 이용하는 가스화 복합발전 플랜트에 대한 공정모사를 수행하였다. 가스화 복합사이클의 발전계통을 모델링하기 위해 본 연구는 MS7001FA 가스터빈이 공기분리장치와 연계되어 있고, 공기분리장치를 위한 공기 추출과 공기분리장치로 부터의 질소희석이 이루어진다고 가정하였다 가스터빈의 폐열은 삼중압력의 페열회수 증기발생장치로부터 회수하였다. 가스터빈의 합성가스 연료는 중잔사유가 Shell 가스화 및 Sulfinol-SCOT-Claus 공정을 거쳐 발생되는 것으로 가정하였다. 공정 최적화 결과로부터, 가스화 복합사이클의 효율이, 질소 희석이 없는 경우와 있는 경우에 대해, 공기추출비 20% 또는 40∼60%에서 가장 우수했다. 그리고, 연소지의 질소희석은 NOx 저감에 매우 바람직하고 현저한 효과를 가져오나, 반면에 가스터빈의 운전조건을 써지 조건에 가깝게 이동시킴을 알 수 있었다.

  • PDF

수소생산 공정에서의 이산화탄소 포집 (CO2 Capture from the Hydrogen Production Processes)

  • 홍연기
    • 융복합기술연구소 논문집
    • /
    • 제12권1호
    • /
    • pp.19-23
    • /
    • 2022
  • Interest in hydrogen production to respond to climate change is increasing. Until now, hydrogen has been mainly produced through the SMR (Steam Methane Reforming) process using natural gas. A large amount of CO2 is emitted in the hydrogen production process through SMR, and the gas flow including CO2 generated in the SMR process has different characteristics for each emission source, so it is important to apply a suitable CO2 capture process. In the case of PSA tail gas or synthesis gas, the applicability of an amine-based process has been confirmed or demonstrated close to a commercial level. However, in the case of the flue gas generated from the reformer, it is still difficult to apply the conventional amine-based process because the partial pressure of CO2 is relatively low. Energy-saving innovative absorbents such as phase separation absorbents can be a solution to these difficulties.

기후변화 협약 대응을 위한 산업별 온실가스 배출 특성 분석 (An Analysis of Sectoral GHG Emission Intensity from Energy Use in Korea)

  • 정환삼;동야달;심상렬
    • 기술혁신학회지
    • /
    • 제11권2호
    • /
    • pp.264-286
    • /
    • 2008
  • 2006년 우리나라의 에너지 사용은 총수입액(28%), 해외의존(97%), 온실가스배출(83%-year 2004)의 비중을 차지하고 있어, 경제나 환경 정책에서 매우 중요한 산업분야이다. 그러나 현실적으로 국내 에너지사용에 따른 온실가스 배출 추계는 산업별 사용량에 국제기구가 권고한 계수를 곱해 사용하는 수준에 머물고 있다. 이러한 수준으로는 post Kyoto Protocol을 통한 개도국의 참여를 강제하려는 새로운 패러다임에 대응할 논리와 정책을 바르게 수립할 수 없다. 본 연구는 한국은행이 발간한 2000년 산업연관표를 기반으로 이형단위 산업연관표를 작성하고, 이를 통해 경제 구성 부문별로 에너지 사용에 따른 온실가스 배출 특성을 분석하였다. 분석은 네가지 측면에서 이루어졌으며, 이는 섹터별 온실가스 배출 밀도 추정, 각 그룹에서 온실가스 배출을 야기한 연료원별 기여도 측정, 산업별 배출계수의 산정, 그리고 국가 총배출량 추정이다. 여기서 추정한 배출량은 온실가스 배출에 관한 국가 공식 통계치와 비교 검증하였다. 연구 접근법은 에너지의 직접사용 과정에서 배출되는 온실가스의 양 뿐만 아니라 배출을 유발하는 간접원인까지도 분석하고 있어, 최근 확산되고 있는 전과정분석(Life Cycle Analysis) 개념에 적합한 모형이다. 이 모형은 향후 온실가스 저감 정책 수립의 중요한 기반이 될 것으로 기대한다.

  • PDF

건설기계의 배출가스 저감을 위한 대형 프로판 전용 엔진 개발 (Development of Large-sized Propane Engine for Emission Reduction of Construction Machinery)

  • 김용래;박철웅;장형준;최영;정문용;한명훈;정동훈
    • 한국가스학회지
    • /
    • 제27권3호
    • /
    • pp.91-97
    • /
    • 2023
  • 오래된 디젤 엔진을 탑재하고 있는 노후화된 건설용 기계 및 차량들은 보통 수명이 길기 때문에 최신의 배기 규제와는 동떨어진 수준의 유해한 배출가스를 계속 배출하고 있다. 따라서 이러한 구형 디젤 엔진을 최신 배기 규제를 만족하는 엔진으로 대체할 수 있다면 대기질 개선에 도움이 될 것으로 기대되는데, 건설 현장에서 손쉽게 구할 수 있는 프로판 연료를 적용한 엔진이 적합한 대안이 될 수 있다. 따라서 본 연구에서는 6.8리터 CNG 엔진을 베이스로 프로판 전용 엔진을 개발하였으며, 가스 전용 인젝터, 배기가스재순환(EGR), 강화된 촉매 등의 기술이 적용되었다. 그 결과 동급의 디젤 엔진 출력 및 토크를 확보하는 한편 최신 배출가스 규제인 Stage-V 수준에서 질소산화물은 절반 수준에 해당하는 배출가스 성능을 달성하였다.

다중회귀분석을 이용한 CO2배출량 추정모형 (Development of CO2 Emission Estimation Model by Multiple Regression Analysis)

  • 조한진;장성호;김영식
    • 한국환경보건학회지
    • /
    • 제34권4호
    • /
    • pp.316-326
    • /
    • 2008
  • The Earth's temperature has risen $0.76^{\circ}C$ (degree) during last 100 years which Implies a sudden rise, compare with the 4oC (degrees) rise through out the past 20,000 years. If the volume of GHG (Greenhouse Gas) emission continues at the current level, the average temperature of the Earth will rise by $1^{\circ}C$ (degree) by 2030 with the further implication that the temperature of Earth will rise by $2{\sim}5^{\circ}C$ (degrees) every 100 years. Therefore, as we are aware that the temperature of the glacial epoch was $8{\sim}9^{\circ}C$ (degrees) lower than the present time, we can easily predict that the above temperature rises can be potentially disastrous for human life. Every country in the world recognizes theseriousness of the current climate change and adopted a convention on climate change in June 1992 in Rio. The COP1 was held in March 1995 in Berlin and the COP3 in Dec. 1997 in Kyotowhere the target (2008-2012) was determined and the advanced nations' reduction target (5.2%, average)was also agreed at this conference. Korea participated in the GHG reduction plan which required the world's nations to ratify the Kyoto Protocol. Ratification of the Kyotoprotocol and the followup requirement to introduce an international emissions trading scheme will require severe reductions in GHGs and considerable economic consequences. USA are still refusing to fully ratify the treaty as the emission reductions could severely damage the economies of these countries. In order to estimate the exact $CO_2$ emission, this study statistically analyzed $CO_2$ emission of each country based on the following variables : level of economic power and scientific development, the industrial system, productivity and energy efficiency.