• Tribology and Lubricants
• /
• v.25 no.5
• /
• pp.348-358
• /
• 2009

To satisfy the more severe emission regulation and the demand of higher fuel economy in near future, the combustion pressure and power output of engines is going to be higher. In order to get the reduction of engine emission and the higher power, it is needed the reduction of the tension and width of ring pack. The lower tension ring and the manufacturing technology of cast iron thinner width ring can bring the friction reduction between the ring and liner during engine running. Therfore, the fuel economy can be achieved. Thereafter the engine emission can be reduced. In this study, by using a developed basic computer program that predicts the inter-ring pressure, the motion of ring and the inter-ring pressure through a crevice volume model between adjacent rings, and the oil film thickness and the friction computed by lubrication theories, it is to be examined the effect of friction reduction from piston ring pack equipped with thinner width ring and lower tension ring.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.3
• /
• pp.39-47
• /
• 2003

UEGI (Unburned Exhaust Gas Ignition) is an alternative method for fast light-off of a catalyst. It ignites the unburned exhaust mixture using two glow plugs installed in the upstream of the close-coupled catalysts. In addition, a hydrocarbon adsorber was applied to the UEGI, for more effective reduction of HC emission. Engine bench tests show that the CCC reaches the light-off temperature laster than the baseline exhaust system and HC and CO emissions are reduced significantly during the cold start. From the vehicle test, it was observed that a few amount of HC emission was reduced even the catalysts were aged. It is expected to develop a solution kit applicable to a new vehicle or used one, to meet the emission regulation

• Journal of Environmental Science International
• /
• v.25 no.1
• /
• pp.23-29
• /
• 2016

This study has conducted greenhouse gas emission reduction test as using Oyster-shells originated PCC paper filler compare to non-Oyster shells used PCC. This examination was estimated and calculated in accordance with both IPCC (Intergovernmental Panel on Climate Change) and World Business Council for Sustainable Development (WBSCD). The greenhouse gas emission reduction estimation result indicates that, when oyster shells are recycled and used as paper filler, it reduces $27.97tCO_2\;per\;100\;ton$ of oyster shells. It is greenhouse gas emission $44.27tCO_2$ from PCC production changed to carbon emission reduction when replaced with oyster shell. LNG greenhouse gas emission $16.3tCO_2$ in relation to the pre-treatment with oyster shell per 100 ton is also reflected. As a result, it is assumed that roughly $0.2797tCO_2/oyster\;shell{\cdot}ton$.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.816-817
• /
• 2007

As UNFCC(United Nations Framework Convention on Climate Change) is enhanced, Korea will perform a CO2 reduction duty. The CO2 reduction duty will effect Korea power system because coal and oil thermal generations emit large CO2 form about 46% of total CO2 emission. Moreover various alternatives should be designed to comply with CO2 reduction duty. In this paper, we analysis resource planning considering CO2 emission constraints and emission trading. And we analysis resource planning under using LP(Linear Programing) and MIP(Mixed Integer Programing).

• Journal of the Korean Professional Engineers Association
• /
• v.37 no.5
• /
• pp.47-50
• /
• 2004

Diesel engines are the major sources of pollutants in the cities and each country is trying to enforce their emission regulations to reduce the diesel emissions. Expecially Commercial diesel engines have large displacement and they are the major sources of diesel emissions in the cities. This paper introduces the major countries' Diesel Engine Regulations and explains the emission reduction technologies that are currently applied and will be applied in the future.

• Journal of Environmental Impact Assessment
• /
• v.8 no.1
• /
• pp.29-40
• /
• 1999

This study focuses on one of typical energy-intensive industries, the cement industry. The purpose of the study is to propose $SO_2$ emission reduction measures in the cement industry. This study partially employed and modified AIM(Asia-Pacific Integrated Model) developed by Japan National Environmental Research Institute to develop AIM/KOREA SULFUR model for simulation. In the study, a base scenario, and mitigation scenarios(a use of low-sulfur contain fuel, fuel conversion to cleaner energy, an induction of desulfurization systems, and energy saving) were employed. The results of the simulation are summarized below: The sulphur dioxide emission from the cement industry in 1992 was estimated to be 106,000 metric tons; however, according to base scenario, sulphur dioxide emission is expected to be increased to 219,000 metric tons, which is 2.1 times greater than that in 1992 by year 2020. To alleviate such increasement, simulation results under various scenarios proved that some degrees of reduction may be possible by an induction of desulfulization systems although there may be numerous ways to interpretate the simulation results.

• KIEAE Journal
• /
• v.12 no.3
• /
• pp.89-94
• /
• 2012

The international community is paying close attention to the climatic changes caused by the meteorological anomalies. In response to such phenomena, after the adoption of the United Nations Framework Convention on Climate Change in 1992, efforts to actively respond to the meteorological changes are proliferating all over the world; even in the Republic of Korea, the issue to tackle the meteorological changes has emerged as a top-priority national agenda. In the year of 2008, after the declaration of the low-carbon, green-growth paradigm by the government, the UNFCCC COP15 has announced a 30% reduction target of the emission of the greenhouse gases by 2020 as compared to the "Business As Usual, BAU" and has also confirmed, as a commitment plan to achieve reduction in the emission of greenhouse gases, the reduction target of greenhouse gases for all sectors, industries and years. (26.9% for buildings) Since the construction of the new apartment houses in the year of 2001, the "Building Energy Efficiency Rating", has been applied to newly constructed building complexes, built in 2010; the accumulated emission reduction has been evaluated at around 450,000toe and the accumulated carbon dioxide emission reduction is at $826,000tCO_2$ And through the prediction of these values under various scenarios (New construction, new construction / expansion of existing uses, when transferred to 1stgrade), the effects on the degree of reduction of greenhouse gases by the increased certification of the Building Energy Efficiency Rating are an alyzed and it is our aim to express the importance of the certification system capable of carrying out a quantitative evaluation of the building energy in order to establish the strategy to reduce the emission of carbon dioxide.

• Journal of Energy Engineering
• /
• v.21 no.3
• /
• pp.272-279
• /
• 2012

The emission quota of 26.9% was allocated to the architectural sector according to the greenhouse gas(GHG) emission reduction goal of the government. It has become inevitable to change the architectural structures in a low-energy consumption and sustainable manner for new and existing house. The introduction of various legal systems and deregulation have been attempted to promote the low carbon emission and sustainable energy conversion. Although overall emission reduction goal has been set for 6.7 million units of existing houses, there has been a lack of standards and directions for the emission reduction measures. This study was intended to present the most economic and effective green technology improvement measures based on the investigation into the current conditions through direct visit to the selected architectural structures and the repeated simulation of relevant technical elements.

• Journal of Environmental Science International
• /
• v.30 no.10
• /
• pp.789-802
• /
• 2021

This study analyzed the characteristics of high PM_2.5 episodes that meets the concentration criteria of Emergency Reduction Measures Plan (ERMP) in Busan during the 2015-2020, and compared with those in Seoul. As a first step, the CAPSS-2017 emission data was employed to analyze the emission differences between Busan and Seoul, and pointed out that Busan emission included the dominance of ship emissions (37.7%) among total PM_2.5 city emissions, whereas fugitive PM_2.5 emission was the highest in Seoul. These emission characteristics are indicating that the controlling action plan should be uniquely applied to cope with ERMP in each region. We selected extremely high PM_2.5 episode days that meet the criteria of ERMP levels. In Busan, Ulsan, and Gyeongnam region, 15, 16, and 8 days of extremely high PM_2.5 cases were found, respectively, whereas Seoul showed approximately doubling of occurrences with 37 cases. However, the occurrences in summer season indicated big differences between two cities: the proportion of summer-season occurrence was 13-25% in Busan, whereas no single case have occurred in Seoul. This is suggesting the needs of comprehensive summer emission reduction plan with focusing on sulfur reduction to effectively cope with the ERMP levels in summer in the southeastern region, including Busan.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.8
• /
• pp.1496-1503
• /
• 2009

The United Nations Framework Convention on Climate Change (UNFCCC) is an international environmental treaty to stabilize greenhouse gas concentrations in the atmosphere. In order to fulfil the commitments of the countries in an economically efficient way, the UNFCCC adapted the emission trading scheme in the Kyoto Protocol. If the UNFCCC's scheme is enforced in the country, considerable changes in electric power industry are expected due to the imposed greenhouse gas emission reduction. This paper proposes a game theoretic model of the case when generation companies participate in both competitive electricity market and emission market simultaneously. The model is designed such that generation companies select strategically between power quantity and greenhouse gas reduction to maximize their profits in both markets. Demand function and Environmental Welfare of emission trading market is proposed in this model. From the simulation results using the proposed model the impact of the emission trading on generation companies seems very severe in case that the emission prices are significantly high.