• Journal of Multimedia Information System
• /
• 제2권4호
• /
• pp.317-326
• /
• 2015

The paper deals with the analysis of the effectiveness of acoustic emission monitoring and diagnostics of engineering products. We discuss the results of the processing results of the field experiment to study the acoustic emission in the alloy and its welded joints in the presence of technological defects. We study the characteristics of the output of acoustic emission signals at different stages of elastic-plastic deformation of alloys. Analyzed acoustic chart and the output waveform of the acoustic emission for the different types of welds. Studies have shown the effectiveness of the Acoustic emission techniques and help improve the accuracy of non-destructive testing systems in problems of automation and control.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권5호
• /
• pp.563-566
• /
• 2010

Using an open-circuit system, we compared the methane ($CH_4$) emission from dry cows fed first-cut Timothy silage ($1^{st}$ TY), second-cut Timothy silage ($2^{nd}$ TY), second-cut Italian ryegrass silage ($2^{nd}$ IR), third-cut Italian ryegrass silage ($3^{rd}$ IR), or second-cut red clover silage ($2^{nd}$ RC) as the sole feed. The methane emission ranged from 258.2 L $day^{-1}$ to 396.5 L $day^{-1}$. The methane emission from dry cows fed red clover silage was relatively lower than that from dry cows fed grass silage. However, the methane emission per unit digestible neutral detergent fiber (NDF) intake (dNDFI) did not differ significantly between the experimental silages. The methane emission was significantly correlated with the NDF intake and digestibility. Methane emission had a significant correlation with the quadratic function of dNDFI. The differences in the daily volume of methane emission from cows fed different forages can be explained by dNDFI.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.43-45
• /
• 2012

As a part of recent CO₂ emission reduction studies in the concrete industry with active use of concrete admixtures with low basic unit of CO₂ emission such as blast furnace slag (BFS), basic unit of CO₂ emission by SBFS was computed in order to assess CO₂ emission by reinforced concrete building with smart blast furnace slag (SBFS). In addition, SBFS concrete was applied to the subject building for assessment of CO₂ emission during material production step among construction steps. Life cycle CO₂ emission assessment on the subject building was classified into 7cases according to mix ratio of BFS and SBFS.

• 한국자동차공학회논문집
• /
• 제10권6호
• /
• pp.117-124
• /
• 2002

For the correct estimation of air pollutant emission from automobiles which is the largest contributor of metropolitan area air pollution, the total pollutant emission from automobiles should be estimated accurately. Nationwide emissions from automobiles, such as CO, HC and NOx, are calculated by using emission factor and total VMT(vehicle miles traveled). The emission factors were derived from the emissions data on chassis dynamometer with test modes which represent the real driving patterns. In the present study, test modes to derive the emission factors for light duty vehicles are developed by using the real driving pattern data for the urban, suburban and express way.

• 한국안전학회지
• /
• 제16권4호
• /
• pp.1-6
• /
• 2001

An experimental study was carried out to investigate the emission characteristics of LP gas burner for the Practical combustion conditions including fm voltage, inlet area, gas Pressure, emission resistance, duct length and height. The result shows that CO is almost remains constant for the emission fan voltage, but significantly increases with the reduction rate of air inlet, up to 3000ppm at 50% of reduction rate. Also, the variation of gas pressure has no effect to CO of gas boiler due to its governor which controls gas pressure secondly, but it gives an rapid increase of CO for the gas range. The emission resistance test shows that CO is suddenly increased with the reduction rate of emission duct above 70% and main burner is stopped at 90%. The reverse wind test shows that CO is suddenly increased with the air velocity above 7m/s and main burner is stopped at 9m/s. The more horizontal length of emission duct is long and the vertical height is low, CO is infinitesimally increased.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전력기술부문
• /
• pp.266-268
• /
• 2004

This paper presents the greenhouse gas emission trading scheme which is under progress as a pilot project at the power sector in preparation for UNFCCC. By referring UK's, Emission Trading is introduced incentive auction to maximize the reduction of greenhouse gas emission. At the 1st step, from year 2006 to 2008, only CO2 is regarded as an objective target to decrease but emission credit is excluded with an assumption and only 5 Generation company take part in as participants. The market operating procedure is composed of participants' registration, baseline verification, incentive auction, the registration of initial and yearly allocation, emission trading, yearly emission verification & approval, yearly obligation conformity, carry forward & incentive grant. It can be serve a guideline the whole aspects of emission trading which will start in 2006 including operation, verification and profit sharing.

• 한국기후변화학회지
• /
• 제9권4호
• /
• pp.407-421
• /
• 2018

In this paper, I analyze the GHG (greenhouse gas) emission factor of the domestic railway transportation sector using the LMDI (Log Mean Divisia Index) methodology. These GHG factors are the emission factor effect, energy intensity effect, transportation intensity effect, and economic activity effect. The analysis period was from 2011 to 2016, and the analysis objects were an intercity railway, wide area railway, and urban railway. The results show that the GHG emission of railway transportation sector decreased during these 6 years. The factors decreasing the GHG emission are the emission factor effect, energy intensity effect, and transportation intensity effect, while the factor increasing the GHG emission is the economic activity effect.

• 한국표면공학회지
• /
• 제49권3호
• /
• pp.316-321
• /
• 2016

To study emission characteristics for dual-emission tandem organic light emitting display (OLED), we fabricated blue fluorescent OLED according to thickness variation of $MoO_x$ as charge generation layer and Al as cathode. The bottom emission characteristics of OLED with $MoO_x$ 2, 3, 5 nm thickness showed threshold voltage of 9, 7, 9 V, maximum current emission efficiency of 19.32, 23.18, 15.44 cd/A and luminance of $1,000cd/m^2$ at applied voltage of 17.6, 13.2, 16.5 V, respectively. The top emission characteristics of OLED with $MoO_x$ 2, 3, 5 nm thickness indicated threshold voltage of 13, 10, 13 V, maximum current emission efficiency of 0.17, 0.23, 0.16 cd/A and luminance of $50cd/m^2$ at applied voltage of 22.6, 16.5, 20.1 V, respectively. In case of thicker or thinner than $MoO_x$ of 3 nm, the emission characteristics were decreased because of mismatching of electron and hole in emission layer. The bottom emission characteristics of OLED with Al 15, 20, 25 nm thickness showed threshold voltage of 8, 8, 7 V, maximum current emission efficiency of 18.42, 22.98, 23.18 cd/A and luminance of $1000cd/m^2$ at applied voltage of 16.2, 13.9, 13.2 V, respectively. The reduction of threshold voltage and increase of maximum current emission efficiency are caused by the increase of current injection according to increase of Al cathode thickness. The top emission characteristics of OLED with Al 15, 20, 25 nm thickness indicated threshold voltage of 7, 7, 8 V, maximum emission luminance of 371, 211, $170cd/m^2$, respectively. The top emission OLED of Al cathode with 15 nm thickness showed maximum luminance and it decreased at thickness of 20 nm. These phenomena are caused by the decrease of intensity of emitted light by reduction of optical transmittance according to increase of Al cathode thickness.

• 한국대기환경학회지
• /
• 제23권2호
• /
• pp.183-190
• /
• 2007

In this study, we have investigated waste incinerators which are one of the major HAPs emission sources. In order to obtain more reliable HAPs emission data from waste incinerators, direct sampling for the possible pollutants from the stack was carried out and the analysis was performed. The purpose of study was to understand the emission status from waste incinerators and recognize the problems and finally to set up a strategy to reduce the HAPs emissions from waste incinerators. The emission concentrations of 8 species of heavy metals and 16 species of PAHs have been analyzed for the first time in Korea. Not only the emission characteristics of HAPs from waste incinerators were identified, but also the analysis of reduction efficiencies for control devices such as BF and wet scrubbing systems was carried out.

• 대한토목학회논문집
• /
• 제33권4호
• /
• pp.1675-1682
• /
• 2013

지구온난화(Global Warming) 문제를 해결하기 위해서는 이산화탄소 배출량을 줄여야 한다. 우리나라는 1인당 이산화탄소 배출량이 세계 Top 수준이기 때문에 배출량을 줄이기 위한 노력을 더욱 적극적으로 할 필요가 있다. 이산화탄소 배출량을 줄이기 위한 노력은 다방면으로 이루어지고 있다. 그러나 $CO_2$ 를 줄이기 위해서는 그것의 배출특성을 알아야 한다. 건설장비의 이산화탄소 배출량을 측정하여 비교분석하는 것은 이러한 측면에서 중요하다. 현재 가장 많이 이용되고 있는 배출량 산정방법은 연료사용량 대비 배출계수를 이용하는 방법이다. 그러나 이 방법은 연료사용량에 비례하지 않는 요인을 반영하지 못하므로 신뢰성에 문제가 있다. 본 연구에서는 건설장비의 이산화탄소 배출량을 직접측정방식으로 산정하여 배출계수에 의한 방식과 비교분석하고 그 차이에 대한 원인을 분석하였다.