• 한국ITS학회 논문지
• /
• 제11권2호
• /
• pp.39-47
• /
• 2012

본 연구에서는 수도권을 중심으로 구축 운영 중에 있는 ITS 무선통신 인프라인 UTIS를 활용하여 긴급차량 우선신호제어 시스템을 개발하였다. 신호교차로에서 긴급차량의 연속주행과 일반차량의 제어지체를 최소화하는 긴급차량 우선신호제어 시스템 구현을 위해 긴급차량의 진행방향(직/좌)을 사전에 파악이 가능하도록 하였으며, 긴급차량 우선신호 제어 방식을 현시삽입과 현시조정 모드로 구분하여 개발하였다. 또한, 시스템에 대한 현장 적용 가능성을 평가하기 위해 CORSIM 모형의 RTE 기능 활용을 통해 HILS 기반의 평가 시스템을 구성하여 EVP 제어 효과에 대한 검증을 수행하였다. 본 연구를 통해 개발된 긴급차량 우선신호제어 시스템은 기 구축된 ITS 인프라를 활용한 것으로 현장 적용 시 경제적이고 효율적인 구축이 가능할 것으로 기대된다.

• 한국응급구조학회지
• /
• 제26권3호
• /
• pp.37-46
• /
• 2022

Purpose: TThe experiment was designed to compare the efficiency of ventilation between conventional BVM ventilation and a newly devised A-BVM ventilation method with Tidal volume, total ventilation rate, average Ventilation speed, and average Ventilation volume. Methods: 40 Paramedical students who agreed to participate in the study were analyzed. Values were measured using IMB PASS after 2 minutes of Brayden Pro manikin with BVM and A-BVM ventilation. The difference in general characteristics was assessed by t-test and ANOVA and the difference in ventilation methods was analyzed by IBM SPSS. Results: A significant difference was found between the two ventilation methods in terms of tidal volume (t=-11.203, p<.001), ventilation time (t=-3.834, p<.001), and optimum ventilation probability (t=10.770, p<.001). A-BVM ventilation method, rather than BVM ventilation method, showed a value close to the appropriate amount recommended by Korean Advanced Life Support (500~600mL) in tidal volume, and higher in optimum ventilation probability. Conclusion: We could identify the a better mode of ventilation. Further studies on the efficacy of existing BVM ventilation methods as compared to device augmented BVM ventilation methods should be carried out to ensure that adequate ventilation is available to patients in clinical practice.

• 대한기계학회논문집A
• /
• 제22권2호
• /
• pp.437-443
• /
• 1998

Automobile company tries to reduce the inertia of powertrain to increase the fuel efficiency and increase the engine power every year to make the high speed driving possible at full load condition. These cause the torsional vibration of powertrain. But the demand about ride comfort improvement is increased constantly, so torsional vibration of powertrain become an emergency problem to be cured. This study is a basic research to reduce the torsional vibration of powertrain at driving condition. First, the heavy duty powertrain is characterized as a vibrating system. Its natural frequencies and mode shapes are reviewed. Second, by comparison of simulation results and experiment results, validity of developed model is verified. Finally, the couterplan which can reduce the torsional vibration by mode analysis and parameter modification is suggested.

• 한국전산유체공학회지
• /
• 제18권3호
• /
• pp.72-78
• /
• 2013

The turbulent flow behavior of air supply and exhaustion in the Shin-gum-ho subway station is analyzed for ordinary and emergency state. The depth of Shin-gum-ho station is 43.6m which consists of the island-type platform(8th floor in underground) and a two-story lobby (first & second floor in underground). An emergency stairway connects between the platform and the lobby. Ventilation operation mode for ordinary state is set up as a combination of air supply and exhaustion in the lobby and platform, while for emergency state it is set up as a full air supply in the lobby and a full exhaustion in the platform. The entire station is covered for simulation. The ventilation diffusers are modeled as 95 square shapes of $0.6m{\times}0.6m$ in the lobby and as 222 square shapes of $0.6m{\times}0.6m$ and 4 rectangular shapes of $1.2m{\times}0.8m$ in the platform. The total of 7.5million grids are generated and whole domain is divided to 22 blocks for MPI efficiency of calculation. Large eddy simulation(LES) is applied to solve the momentum equation and Smagorinsky model($C_s$=0.2) is used as SGS(subgrid scale) model. The time-averaged velocity fields are compared to experimental data and show a good agreement with it.

• 한국자동차공학회논문집
• /
• 제25권1호
• /
• pp.19-27
• /
• 2017

In this paper, a simulator hardware and control design for an electronic parking brake (EPB) are proposed for emergency vehicle braking when the hydraulic break and anti-lock brake systems (ABS) fail to function. EPB systems are designed specifically for park braking and are usually installed on the rear wheels. However, in an emergency situation when all vehicle brake systems fail, the EPB can be utilized to stop the vehicle and track the target slip ratio as the ABS. This paper analyzed the non-linear EBP of the type of motor on caliper (MoC) based on experiments. A simulator hardware is also designed to validate the performance of the designed EPB controller in terms of braking distance and performance in tracking the target slip ratio. Through the experimental analysis, it is confirmed that a sliding mode controller can be applied on a non-linear EPB to track the target slip ratio.

• 한국안전학회지
• /
• 제25권3호
• /
• pp.118-122
• /
• 2010

원자력발전소의 운전 유연성 증대, 안전성 및 경제성 향상, 정비 부담을 완화하기 위해 비상디젤발전기의 허용정지시간 연장이 요구된다. 확률론적안전성평가(probabilistic safety assessment) 기법으로 현재의 비상디젤발전기의 허용정지 시간을 3일에서 7일, 10일, 14일로 연장시 안전성 영향을 평가하였다. 종합적으로 평가결과, 비상디젤발전기의 허용정지시간 연장시 EDG 점검 또는 정비기간 중 인적실수으로 인한 발전소 불시정지 예방 및 안전성을 향상 시키는 것으로 분석되었다.

• 한국중재학회지:중재연구
• /
• 제23권4호
• /
• pp.123-138
• /
• 2013

The surge of cross border trade and transactions has seen international arbitration fast emerging as the preferred mode of dispute resolution. This phenomenon is especially remarkable in the Asian region. The Singapore International Arbitration Centre ("SIAC") aspires to contribute to this growth as one of the leading arbitral institutions. The objective of this article is to provide an insight into the key features of SIAC Rules. This article has been divided into two parts; the first part discusses how the SIAC Rules are helpful in building bridges in international arbitration between the common law and civil law systems. We have attempted to throw light on how the SIAC Rules may be tailored by the parties to bring about a harmonization in the common law and civil law practices in the conduct of the arbitration proceedings. In the second part of the article, we discuss the two most popular procedures introduced in the SIAC Rules in 2010 i.e. 'Emergency Arbitration' and 'Expedited procedures'. The emergency arbitration provisions enable a party to obtain order(s)/award for urgent interim relief(s) upon commencement of arbitral proceedings but pending the constitution of the main Tribunal. The expedited Procedure provisions give parties the option of having their disputes determined in six (6) months from the date of the constitution of the tribunal.

• 자동차안전학회지
• /
• 제5권1호
• /
• pp.56-61
• /
• 2013

This paper presents a development of the Advanced Emergency Braking (AEB) Algorithm for passenger vehicles. The AEB is the system to slow the vehicle and mitigate the severity of an impact when a rear end collision probability is increased. To mitigate a rear end collision, the AEB comprises of a millimeter wave radar sensor, CCD camera and vehicle parameters of which are processed to judge the likelihood of a collision occurring. The main controller of the AEB algorithm is composed of the two control stage: upper and lower level controller. By using the collected obstacle information, the upper level controller of the main controller decides the control mode based not only on parametric division, but also on physical collision capability. The lower level controller determines warning level and braking level to maintain the longitudinal safety. To decide the braking level, Last Ponit To Brake and Steer (LPTB/LPTS) are compared with current driving statues. To demonstrate the control performance of the proposed AEBS algorithm's, closed-loop simulation of the AEBS was conducted by using the Matlab simlink and CarSim software.

• 설비공학논문집
• /
• 제26권2호
• /
• pp.61-66
• /
• 2014

Exhaust heat recovery ventilation systems conserve energy through enthalpy recovery between air intake and exhaust, and they are being increasingly used. An exhaust heat recovery ventilation system can be installed in the ceiling of a balcony or emergency evacuation space. However, in the case of fire, the emergency evacuation space has to by law remain as empty space, and therefore, a ventilation system can't be installed in an emergency evacuation space. Therefore, the need for a proper installation space for a ventilation system is emphasized. In this study, to install a heat recovery ventilation system in a lightweight wall, a heat exchanger was assembled of thickness below 140 mm. The efficiency of heat recovery was analyzed through performance experiment, in the case of the cooling and heating mode. The heat recovery efficiency increases when the surface area is increased, by using closer channel spacing in the heat exchanger, or by increasing the size of the heat exchanger.

• 드라이브 ㆍ 컨트롤
• /
• 제18권4호
• /
• pp.28-34
• /
• 2021

Among the currently available types of fuel, LNG emits a relatively small amount of nitrogen oxide and carbon dioxide when it burns in the engine. However, since LNG is a flammable material, leakage during bunkering can lead to accidents, such as fires. Therefore, it is necessary to install a remote operation emergency shut-down (ESD) valve to block the flow and leakage of LNG in an emergency situation that occurs during bunkering. The ESD valve uses a hydraulic driving device consisting of a hydraulic control valve and a hydraulic motor to control globe valve disc displacement, which regulates the flow path for LNG transfer. At this time, there are various nonlinearities in hydraulic driving devices; hence, it is necessary to design a controller with robust control performance against these uncertainties. In this study, modeling of the ESD valve was carried out, and a sliding mode controller to control the displacement of the globe valve disc was designed. As a result, it was confirmed that the designed control performance could be achieved by overcoming nonlinearity characteristics using the designed controller.