• Journal of Bio-Environment Control
• /
• v.24 no.2
• /
• pp.123-127
• /
• 2015

Wood piles are rarely used in the construction of a greenhouse in Korea, but they are relatively more often used in other countries, such as the Netherlands. There are several advantages associated with wood piles: they are more cost-effective, less time-consuming, and more ecofriendly than the steel pipes (SPs) and pre-stressed highstrength (PHC) piles. However, one of the limiting conditions is that they have to be installed below the groundwater level to prevent decay. Since the groundwater levels are generally high in the reclaimed lands in Korea, wood piles are expected to be used often as reinforcements for foundations of greenhouses in these areas. In this study, we measured the uplift capacities of wood piles through in-situ uplift capacity tests with an aim to provide basic design data for wood pile foundations. In order to test their applicability, we then compared these experimentally measured ultimate uplift capacities with the ones calculated through some of the existing theoretical equations. The wood piles used in the loading tests were made of softwood (pine wood), and the tests were performed using piles with different diameters (∅25cm and ∅30cm) and embedded depths (1m, 3m, and 5m). The test results revealed that the uplift capacity of the wood piles showed a clear linearly increasing tendency in proportion to the embedded depth, with the ultimate uplift capacities for the diameters 25cm and 30cm being 9.38 and 10.56tf, respectively, at the embedded depth of 5m; thus demonstrating uplift capacities of ${\geq}9tf$. The comparison between the actually measured values of the uplift capacity and the ones calculated through equations revealed that the latter, which were obtained using the ${\alpha}$ method, were generally in an approximate agreement with the in-situ measured values.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.12
• /
• pp.123-134
• /
• 2019

This study presents dynamic responses of circular pipe models as a part of fundamental studies on dynamic stability monitoring of the large circular steel pipe cofferdam with the ship collision. Small-scaled laboratory experiments are performed with a single and bolted circular steel pipes with a diameter, thickness, and height of 30, 0.4, 90 cm, respectively. The bolted circular steel pipe is configured with three segments of 30 cm in height. Circular steel pipe models are embedded in a soil tank, all 1 m in length, width, and height. The thickness of soil in the soil tank is set at 23 cm. The ship collision is simulated with a hammer impacting. The dynamic responses are investigated with different water levels of 25, 40, 55, and 70 cm. Experimental results show that a signal energy decreases with increasing water level. More sensitive reduction in the energy appears for the bolted circular steel pipe. A predominant frequency decreases with increasing water level for both single and bolted steel pipes. The minor reduction in the frequency appears for the bolted circular steel pipe under the water level of 70 cm. This study suggests that the signal energy and frequency response is useful for the dynamic stability monitoring of the large circular steel pipe cofferdam.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.3
• /
• pp.1-13
• /
• 2015

Strong ties such as family members, relatives and close friends have been widely acknowledged as a vital factor when a potential entrepreneur attempts to initiate entrepreneurial activity. Recent theoretical arguments focus that family social capital, a form of social capital, that is embedded in family relationships can contribute to venture creation as well as to the development of competitive advantage for established firms. Meantime, there have been arguments that the most dominant single entrepreneurial ethnic group in the world is the Chinese people, while the People's Republic of China is widely recognized as fast growing economic power that is driven by entrepreneurial ventures in a large scale. This study tests the effect of perceived relational supports typically being provided by family members, close relatives and friends on forming self-efficacy and entrepreneurial motivation of university students by using samples collected from 4 Korean Universities(Wonkwang, Baekseok, Soongsil and Dankook university) and Guangzhou University in China. The mediating of self-efficacy was also tested to gain better understanding of the role of the variable. The results of the study suggest that 1) both self-efficacy and entrepreneurial motivation are influenced positively by the perceived relational supports, 2) self-efficacy of university students affects their entrepreneurial motivation positively, 3) self-efficacy is appeared to be mediated partially for China in between perceived relational supports and entrepreneurial motivation, but the same variable is exhibited a full mediation in the same path of the research model for Korea, which was a distinction between the students of two countries in this study. Discussion and practical implication on the results are provided.

• Korean journal of communication and information
• /
• v.31
• /
• pp.193-223
• /
• 2005

As the number of TV channels rapidly grows, the systematic marketing and PR communication of broadcasters are becoming more and more important. To overcome the challenges the sharply increased competition poses, TV stations ave to intensify their strategic marketing efforts. This paper analyses the editorial information aired about the broadcasters and their TV programming as part of the PR efforts made. This present research project is based on one week periods of analysis of TV programming produced and aired by German broadcasters. The program analysis of the five TV channels included in this study revealed a total of 406 cases in which editorial references were made. The result shows no systematic differences between the public and commercial Broadcasters. Channel-specific differences are, however, obvious. PR communication embedded in the regular programs is increasingly tied to media organization and frequently occurs in the reporting of journalistic content. The high number of promotions as part of informational, and even more so as part of magazine and news formats, must be viewed as problematic. Program related branding and the specific tools used to promote the programs provided further evidence regarding the importance of media economic factors. TV channels not only promote their own programs, but also those of affiliated stations, and the increasing influence of economic considerations will have long-range consequences on the variety and quality of the journalistic output. The study furthermore revealed that TV channels utilize program promotion at any time of the day.

• Korean Journal of Social Welfare
• /
• v.67 no.2
• /
• pp.161-181
• /
• 2015

This article tries to identify the regulating mechanism of the welfare states on the private spheres of individuals and families. When the welfare state is to be understood as an institutional arrangement which is based upon the 'modernity', the reflectivity on the welfare state is about to be on the modernity and on the institutions as well. Authors assume the welfare state as an historical and developmental type of modern states. The critical components of modernity embedded in birth and growth of modern welfare states projected to their institutions are identified. Welfare states dissociates the political dynamics which have built the foundation of the welfare state itself, and faces against the new political dynamics of the individualized society. Finally, welfare state confronts the institution failure due to its intrinsic characteristics, and consequently individuals and families come across the institution dependency. Individuals in the overly rationalized spheres are being depoliticized, and they are identified themselves as the subjects of status-struggles of the institutions other than the subjects of the political dynamics of welfare states.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.3
• /
• pp.1061-1075
• /
• 2016

Context: There are no recent authoritative data about incidence and prevalence of various types of cancers in Pakistan. Aim: To determine the frequency of malignant tumors seen in our practice and provide a foundation for building a comprehensive cancer care strategy. Materials and Methods: 10,000 successive cases of solid malignant tumors reported in 2014 were included. All cases had formalin fixed, paraffin embedded specimens available and diagnosis was based on histological examination of H&E stained slides plus ancillary studies at the Section of Histopathology, Department of Pathology and Laboratory Medicine, Aga Khan University Hospital, Karachi. The latest WHO classifications were used along with the latest CAP protocols for reporting and the most updated TNM staging. Results: There were 9,492 (94.9%) primary tumors while 508 (5.1%) were metastatic. Some 5,153 (51.5%) were diagnosed in females and 4,847 (48.5%) in males. The commonest malignant tumors in females were breast (32%), esophagus (7%), lymphomas (6.8%), oral cavity (6.7%) and ovary (4.8%), while in males they were oral cavity (13.9%), lymphomas (12.8%), colorectum (7.9%), stomach (6.9%) and esophagus (6.6%). Malignant tumors were most common in the 5th, 6th and 7th decades. About 8% were seen under 20 years of age. Conclusions: Oral cavity and gastrointestinal cancers continue to be extremely common in both genders. Breast and esophageal cancers are prevalent in females. Lung and prostate cancer are less common than in the west. Ovarian cancer was very common but cervix cancer was less so.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.11
• /
• pp.119-127
• /
• 2013

Recently, several researches on the development of new economical foundation types have been performed to support floating structures as many offshore structures have been constructed. This study focused on the evaluation of bearing capacity of group suction piles, which are connected by a concrete pile cap. The offshore floating structures are mainly subjected to horizontal loading, so the horizontal bearing capacities of the group suction piles were analyzed by performing 3-dimensional finite element analyses. The group suction piles are expected to behave as a rigid pile due to its shallow embedded depth. Therefore, the detailed soil modeling was necessary to simulate the bearing behavior of soils under low confining pressure. The modulus and the strength of soils were modelled to increase with effective confining pressure in soils. For the parametric study, the center-to-center spacing between piles was varied and two soil types of clay and sands were applied. The analyses results showed that the yielding load of the group pile increased with the increase of the pile spacing and the yielding load of the group piles with 5D spacing was about 3 times larger than that of the single pile with free rotation.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.11
• /
• pp.63-73
• /
• 2010

Monopiles, used as one foundation option for offshore wind turbines, are usually subjected to great cyclic lateral loads due to wind and wave. In this study, model pile load tests were performed using calibration chamber and three model piles with different pile lengths in order to investigate the behavior of laterally cyclic loaded piles driven into sand. Model test results show that the first loading cycle generates a bigger displacement than the following ones, and the permanent displacement of piles by one loading cycle decreases with increasing the number of cycles. 1-way cyclic loading causes the permanent displacement in the same direction as cyclic loading, whereas 2-way cyclic loading causes the permanent displacement in the reverse direction of initial loading. It is also observed that the permanent displacement of piles due to cyclic lateral loads increases with decreasing relative density of soil and with increasing the magnitude of cyclic loads. However, it is insensitive to the earth pressure ratio of soil and embedded pile length. In addition, based on the model pile load test results, equations for estimation of the permanent lateral displacement and rotation angle of piles due to 1-way cyclic lateral loads are proposed.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.4
• /
• pp.149-163
• /
• 2023

The policy of promoting innovation clusters aims to enhance the competitiveness of industries by strengthening the linkages between industry sectors and research sectors in specific regions. In Korea, after the concept of innovation clusters was introduced by the OECD in 1997, Korean government actively pursued policies based on this concept in the fields of industry, region, and science and technology. Previous policies and research on the activation of innovation clusters have tended to focus on the exchange and collaboration among members. However, this study focused on enhancing the competitiveness of industries and regions, in other words, strengthening the competitiveness of companies, which is the fundamental reason for fostering innovative clusters. Accordingly, this study aimed to analyze the impact of factors activating innovation clusters on the business performance of SMEs located in the Daedeok Innopolis. To achieve this, based on the essential concept of innovation clusters such as industrial agglomeration factors, networking factors, innovation generation factors, the study derived factors for activating innovation clusters and verified hypotheses using the survey results of 175 companies. Among the factors activating innovation clusters, industrial agglomeration and innovation generation were found to have a positive impact on the business performance of companies. However, networking factors were analyzed to have no significant influence on the business performance of companies. This study differentiates itself by addressing the factors for activating innovation clusters through empirical analysis, unlike previous case-based studies. Furthermore, considering the difference between intuitive judgments on networking factors in innovation clusters and their actual impact on business performance, the study raised the practical significance of conducting a comprehensive examination from various perspectives, such as the socially and culturally embedded structures in the region, the characteristics of specialized industries, and the needs of cluster members, to develop more effective policies for innovation clusters.

• Journal of the Korea Society for Simulation
• /
• v.18 no.3
• /
• pp.73-82
• /
• 2009

Due to the many advantages including low price, low power consumption, and miniaturization, the CMOS camera has been utilized in many applications, including mobile phones, the automotive industry, medical sciences and sensoring, robotic controls, and research in the security field. In particular, the 360 degree omni-directional camera when utilized in multi-camera applications has displayed issues of software nature, interface communication management, delays, and a complicated image display control. Other issues include energy management problems, and miniaturization of a multi-camera in the hardware field. Traditional CMOS camera systems are comprised of an embedded system that consists of a high-performance MCU enabling a camera to send and receive images and a multi-layer system similar to an individual control system that consists of the camera's high performance Micro Controller Unit. We proposed the SL-AVS (Small Size/Low power Around-View System) to be able to control a camera while collecting image data using a high speed synchronization technique on the foundation of a single layer low performance MCU. It is an initial model of the omni-directional camera that takes images from a 360 view drawing from several CMOS camera utilizing a 110 degree view. We then connected a single MCU with four low-power CMOS cameras and implemented controls that include synchronization, controlling, and transmit/receive functions of individual camera compared with the traditional system. The synchronization of the respective cameras were controlled and then memorized by handling each interrupt through the MCU. We were able to improve the efficiency of data transmission that minimizes re-synchronization amongst a target, the CMOS camera, and the MCU. Further, depending on the choice of users, respective or groups of images divided into 4 domains were then provided with a target. We finally analyzed and compared the performance of the developed camera system including the synchronization and time of data transfer and image data loss, etc.