• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.1015-1018
• /
• 2005

This study intended to demonstrate a general system as an web server implemented by pure software solution and focused on collecting data by remote control through Internet and constructing its' control frame. To achieve these, this study suggested an optimized, low-power, ultra tiny embedded web server. When unpredictable accidents, such as heat sensor or industrial disasters, happen, it will connect sensors collecting building information each other by network and obtain final results via web porting, web hardware control or porting, or hardware test process in a boot loader on the basis of StrongARM SA-1110 processor.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.436-438
• /
• 2007

As the sensors and communication technology get advance, the remote health diagnosis for patients and senior persons at home are possible now without visiting doctors in hospitals. A low-power ubiquitous health check device was developed adapting Real-Time Embedded Linux is developed. This ubiquitous device is consisted of three sensors. The wrist type health checking terminal acquires periodically the health data by using a blood pressure sensor, a pulse sensor and a body temperature sensor. It transmits the health data to the access point located at the home center through the ZigBee wireless communication modem. This health data collector or access point device sends the data again to the main server operated in a hospital or health care organization. The health server control continuously the input data and sends an alarm signal to the assigned. doctor and responsible persons using cellular SMS when any dangerous events occur. This wrist type health check device has an embedded linux OS using Intel PAX255 MPU. The developed U-Health system is applicable for checking patients health in remote at home. And their family or related persons in remote site can check the patients health status at any time. They can be assured by receiving SMS record and alarm of emergency case which is transmitted from the health server.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.12
• /
• pp.1173-1178
• /
• 2007

Ubiquitous sensor network (USN) is composed of many sensor nodes which are one of the simplest form of embedded system. In developing the sensor network system, a debugging tool is necessary to test and verify the system. Recently, a so-called packet analyzer has been developed for this purpose, and it supports IEEE 802.15.4 which is considered as the standard for the sensor network protocols. The major function of the packet analyzer is to take RF packets from sensor nodes and show the structure and the data of the packets graphically to the user. However, the conventional packet analyzers do not support remote control because they require a USB interface along with a personal computer. To make it available for remote control, we propose a new packet analyzer based on a server-client scheme in which a server program is implemented on embedded Linux and a client program is implemented on Windows for convenient use.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.414-416
• /
• 2004

The intelligent PVR(Personal Video Recorder) is an enhanced PVR that provides viewers with some advanced features as well as pause, instant replay, search and skip forward found in conventional PVRs. By embedding a home server into a PVR, it is possible for an intelligent PVR to provide a powerful web-based management user interface constructed using HTML, graphics and other features common to web-browsers. When applied to other embedded systems, web technologies offer graphical user interfaces which are user-friendly, inexpensive, cross-platform and network-ready. It is the purpose of this paper to introduce implementation of intelligent PVR which is control by internet. We present the architecture of an home- server with a simple but powerful web-based network interconnection.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.697-700
• /
• 2002

In this paper, we proposed the micro web-server Implementation on Strong ARM processor with embedded Linux. The parallel port connecting parallel I/O is controlled via HPPT protocol and web browser program. HTTP protocol is ported into Linux and the micro web server program and port control program are installed on-board memory using CGI to be accessed by web browser, such as Internet Explore and Netscape. 8bit LED and DIP switches are connected to the processor port and the switch input status is monitored and the LED output is controlled from remote hosts vie internet. The result of the proposed embedded micro-web server can be used in automation systems, remote distributed control via internet using web browser.

• Journal of information and communication convergence engineering
• /
• v.11 no.2
• /
• pp.112-117
• /
• 2013

In order to reuse a register transfer level (RTL)-based IP block, it takes another architectural exploration in which the RTL will be put, and it also takes virtual platforms to develop the driver and applications software. Due to the increasing demands of new technology, the hardware and software complexity of organizing embedded systems is growing rapidly. Accordingly, the traditional design methodology cannot stand up forever to designing complex devices. In this paper, I introduce an electronic system level (ESL)-based approach to designing complex hardware with a derivative of SystemVerilog. I adopted the concept of reuse with higher levels of abstraction of the ESL language than traditional HDLs to design multiplication server farms. Using the concept of ESL, I successfully implemented server farms as well as a test bench in one simulation environment. It would have cost a number of Verilog/C simulations if I had followed the traditional way, which would have required much more time and effort.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.6 s.312
• /
• pp.61-67
• /
• 2006

In this paper it was introduced that embedded RFID Reader /Writer system including PXA255 ARM chip which enables the Tag signal to be used by data and video processing via IEEE 802.11 communication protocol. Embedded RFID R/W middle ware was developed which transmit the searched result in the data base using the received Tag signal via IEEE 802.11 communication protocol. Developed embedded RFID R/W system was composed of three parts - PXA255 ARM chid (Core Part) 13.56 MHz RFID Reader /Writer, wireless LAN for data communication with server and TFT-LCD terminal. Once this system receives the Tag signal through the serial port, it transmits the data through the wireless LAN to the server and it displays the received image data which was processed by the server onto the TFT-LCD screen. Embedded RFID R/W Middle ware transmits the received Tag signal from RFID R/W to the embedded system, which activates the socket program to connect to the window server via IEEE 802.11 communication protocol and transmits the Tag signal. Window server program searches the Database using this Tag information and displays the result on to the TFT-LCD window in the embedded system via IEEE 802.11 protocol.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1655-1658
• /
• 2004

In this paper, we design and implement remote servo motor control system with real-time micro embedded operating system. The system, where controller and camera image grabber are mounted, handles control commands transmitted from a remote PC web browser. A hard real-time servo motor driver running on the real-time micro embedded OS and then a digital control application which confirms precise sampling time intervals is constructed. Frame grabber images transmitted from camera are saved in a image data format to view on remote PC web browser.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1003-1006
• /
• 2004

In this paper have developed a system for monitoring and processing the real time sensor data in remote site through network. For realizing this system, measurement equipment and protocol are used to transmit the measurement data to remote server and to process measurement data. In server part, the received data from remote site sensor is converted to text or graphic charts for user. The measurement device in sensor part receives the sensor data form sensor and store the received data to its internal memory for transmitting data to server part through Internet. Also the measurement device can receive data form server. The temperature sensor is connected to the measurement device located in laboratory and the measurement device measures temperature of laboratory which can be confirmed by user through Internet. We have developed a server programworking on the Linux to store measurement data from measurement device to server memory. The program is use for SNMP(Simple Network Management Protocol) to exchange data with measurement device. Also the program changes the measurement data into text and graphic charts for user display. The program is use apache PHP program for user display and inquiry. The real time temperature measurement system can be apply for many parts of industry and living.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.4 no.2
• /
• pp.79-83
• /
• 2009

Streaming Technology can support the real-time playback without downloading and storing multimedia data in local HDD. So, client browser or plug-in can represent multimedia data before the end of file transmission using streaming technology. Recently, the demand for efficient real-time playback and transmission of large amounts of multimedia data is growing rapidly. But most users' connections over network are not fast and stable enough to download large chunks of multimedia data. In this paper, we propose an intelligent IP streaming system based on personalized media service. The proposed IP streaming system enables users to get an intelligent recommendation of multimedia contents based on the user preference information stored on the streaming server or the home media server. The supposed intelligent IP streaming system consists of Server Metadata Agent, Pumping Server, Contents Storage Server, Client Metadata Agent and Streaming Player. And in order to implement the personalized media service, the user information, user preference information and client device information are managed under database concept. Moreover, users are assured of seamless access of streamed content event if they switch to another client device by implementing streaming system based on user identification and device information. We evaluate our approach with manufacturing home server system and simulation results.