• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.59-60
• /
• 2023

The corrosion of steel rebar embedded in the coastal areas is corroding once the chloride ions ingress through the pores of the concrete. Therefore, in the present study, a 100 ㎛ thick Al and Zn coating was deposited by an arc thermal spray process onto the steel. The corrosion studies of these deposited coatings were assessed in 3.5 wt.% NaCl contaminated concrete pore (CP) solution with immersion periods. The results show that the Al coating is more corrosion resistance compared to the Zn coating attributed to the formation of gibbsite (γ-Al(OH)₃) whereas Zn coating exhibits Zn(OH)₂ onto the coating surface as passive layer. The Zn(OH)₂ is readily soluble in an alkaline solution. Alternatively, γ-Al(OH)₃ on the Al coating surface is less solubility in the alkaline pH, which further provides barrier protection against corrosion.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.1
• /
• pp.31-38
• /
• 2003

In the current electronic technology atmosphere, MEMS (Microelectromechanical System) technology is regarded as one of promising device manufacturing technologies to realize market-demanding device properties. In the packaging of MEMS devices, the packaged structure must maintain hermeticity to protect the devices from a hostile atmosphere during their operations. For such MEMS device vacuum packaging, we introduce the LTCC (Low temperature Cofired Ceramic) packaging technology, in which embedded passive components such as resistors, capacitors and inductors can be realized inside the package. The technology has also the advantages of the shortened length of inner and surface traces, reduced signal delay time due to the multilayer structure and cost reduction by more simplified packaging processes owing to the realization of embedded passives which in turn enhances the electrical performance and increases the reliability of the packages. In this paper, the leakage rate of the LTCC package having several interfaces was measured and the possibility of LTCC technology application to MEMS devices vacuum packaging was investigated and it was verified that improved hermetic sealing can be achieved for various model structures having different types of interfaces (leak rate: stacked via; $4.1{\pm}1.11{\times}10^{-12}$/ Torrl/sec, LTCC/AgPd/solder/Cu-tube; $3.4{\pm}0.33{\times}10^{-12}$/ Torrl/sec). In real application of the LTCC technology, the technology can be successfully applied to the vacuum packaging of the Infrared Sensor Array and the images of light-up lamp through the sensor way in LTCC package structure was presented.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.5
• /
• pp.9-20
• /
• 2005

In this paper, we propose ubiTrack, a system which tracks users' location in indoor environments by employing infrared-based proximity method. Most of recently developed systems have focussed on performance and accuracy. For this reason, they adopted the idea of centralized management, which gathers all information in a main system to monitor users' location. However, these systems raise privacy concerns in ubiquitous computing environments where tons of sensors are seamlessly embedded into environments. In addition, centralized systems also need high computational power to support multiple users. The proposed ubiTrack is designed as a passive mobile architecture to relax privacy problems. Moreover, ubiTrack utilizes appropriate area as a unit to efficiently track users. To achieve this, ubiTrack overlaps each sensing area by utilizing the TDM (Time-Division Multiplexing) method. Additionally, ubiTrack exploits various filtering methods at each receiver and utilization module. The filtering methods minimize unexpected noise effect caused by external shock or intensity weakness of ID signal at the boundary of sensing area. ubiTrack can be applied not only to location-based applications but also to context-aware applications because of its associated module. This module is a part of middleware to support communication between heterogeneous applications or sensors in ubiquitous computing environments.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.30-30
• /
• 2007

현재 다양한 종류의 RF 통신 제품이 시장에 등장하면서 제품의 경쟁력 확보에 있어 소형화 정도가 중요한 이슈가 되고 있다. Passive Device는 RF Circuit을 제작할 때 많은 면적을 차지하고 있으며 이를 감소시키기 위해 여러 연구가 진행되고 있다. 가장 효과적인 방법으로 반도체 집적기술로 크기를 줄이는 방법이 있으나, 공정이 비싸고 제작 시간이 오래 걸려 제품개발 시간과 개발비용이 상승하게 된다. 반면에 SoP-L 공정은 PCB 제작에 이용되는 일반적인 재료와 공정을 사용하므로 개발 비용과 시간을 줄일 수 있다. SoP-L의 또 하나 장점은 다종 재료를 다층으로 구성할 수 있다는 점이다. 최근 chip-type의 Device를 PCB 기판 안에 내장하는 방법의 RF Circuit 소형화 연구가 많이 진행되고 있다. 본 연구에서는 SoP-L 공정으로 chip-type 수동소자를 PCB 기판 내에 함몰하여 수동소자회로를 구현, 분석하여 보았다. 수동소자회로는 880 MHz~960 MHz(GSM) 영역과 1.71 GHz~1.88 GHz(DCS) 영역을 나누는 Diplexer를 구성하였다. 1005 size의 chip 6개로 구현한 Diplexer를 표면실장과 함몰공정으로 제작하고 Network Analyzer로 측정하여 비교하였다. chip 표면실장으로 구현된 Diplexer는 GSM에서 최대 0.86 dB의 loss, DCS에서 최대 0.68 dB의 loss가 나타났다. 표면실장과 비교하였을 때 함몰공정의 Diplexer는 GSM 대역에서 약 0.5 dB의 추가 loss가 나타났으며 목표대역에서 0.6 GHz정도 내려갔다. 이 결과를 바탕으로 두 공정 간 차이점을 확인하고, 함몰공정으로 chip-type 수동소자를 사용하였을 때 고려해야 할 점을 분석하였다. 이를 바탕으로 SoP-L 함몰공정의 안정성을 높여서 이것을 이용한 회로의 소형화에 적용이 가능할 것으로 기대한다. 특히 능동소자의 DC Power Control에서 고용량의 수동소자를 이용할 때 집적도를 높일 수 있을 것이다.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.10
• /
• pp.147-160
• /
• 2008

This paper presents the results of full-scale loading tests performed on 54 passive anchors and 4 group anchored footings grouted to various lengths at several sites in Korea. The test results, the failure mechanisms as well as uplift capacities of rock anchors depend mostly on rock type and quality, embedded fixed length, properties of the discontinuities, and the strength of rebar. Anchors in poor quality rocks generally fail along the grout/rock interfaces when their depths are very shallow (a fixed length of less than 1 m). However, even in such poor rocks, we can induce a more favorable mode of rock pull-up failure by increasing the fixed length of the anchors. On the other hand, anchors in good quality rocks show rock pull-up failures with high uplift resistance even when they are embedded at a shallow depth. Laboratory test results revealed that a form of progressive failure usually occurs starting near the upper surface of the grout, and then progresses downward. The ultimate tendon-grout bond strength was measured from $18{\sim}25%$ of unconfined compressive strength of grout. One of the important findings from these tests is that the measured strains along the corrosion protection sheath were so small that practically the reduction of bond strength by the presence of sheath would be negligible. Based on test results, the main parameters governing the uplift capacity of the rock anchor system were determined. By evaluation of the ultimate uplift capacity of anchor foundations in a wide range of in situ rock masses, rock classification suitable for a transmission tower foundation was developed. Finally, a very simple and economical design procedure is proposed for rock anchor foundations subjected to uplift tensile loads.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.2
• /
• pp.135-140
• /
• 2009

This paper discusses how to change the electromagnetic waves' property in the cut-off causing discontinuity existing in the guiding structure of the RF passive component by using the metamaterial and elaborates on its principle. Particularly, we find and explain, from the viewpoint of electromagnetics and circuit theories, the so-called tunneling condition that when the segment with an extremely narrow cross-section leading to blockage in the parallel-plate waveguide is given the ENZ(Epsilon Near Zero) for its filling material, the wave starts to propagate through the segment. The analysis method as a transmission-line theory taking the discontinuity and material change into consideration is shown valid through the comparison with other methods for analyzing parallel-plate waveguides, and provides the illustration of the S-parameters and impedance describing the characteristics of the tunneling.

• The Journal of Advanced Prosthodontics
• /
• v.3 no.4
• /
• pp.177-185
• /
• 2011

PURPOSE. The aim of this study was to evaluate the effect of dimensional stability of splinting material on the accuracy of master casts. MATERIALS AND METHODS. A stainless steel metal model with 6 implants embedded was used as a master model. Implant level impressions were made after square impression copings were splinted using 5 different techniques as follows. (1) Splinted with autopolymerizing resin and sectioned, reconnected to compensate polymerization shrinkage before the impression procedure. (2) Splinted with autopolymerizing resin just before impression procedure. (3) Primary impression made with impression plaster and secondary impression were made over with polyether impression material. (4) Splinted with impression plaster. (5) Splinted with VPS bite registration material. From master model, 5 impressions and 5 experimental casts, total 25 casts were made for each of 5 splinting methods. The distortion values of each splinting methods were measured using coordinate measuring machine, capable of recordings in the x-, y-, z- axes. A one-way analysis of variance (ANOVA) at a confidence level of 95% was used to evaluate the data and Tukey's studentized range test was used to determine significant differences between the groups. RESULTS. Group 1 showed best accuracy followed by Group 3 & 4. Group 2 and 5 showed relatively larger distortion value than other groups. No significant difference was found between group 3, 4, 5 in x-axis, group 2, 3, 4 in y-axis and group 1, 3, 4, 5 in z-axis (P<.0001). CONCLUSION. Both Splinting impression copings with autopolymerizing resin following compensation of polymerization shrinkage and splinting method with impression plaster can enhance the accuracy of master cast and impression plaster can be used simple and effective splinting material for implant impression procedure.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.4 s.33
• /
• pp.37-41
• /
• 2004

As mobile communication devices use wide bands for large data transmission, Low Temperature Co-fired Ceramic(LTCC) has been a candidate for module substrate, for it provides better electrical properties and enables various embedded passive devices compared to conventional PCB. The LTCC, however, has applied in limited area because of non-uniform shrinkage. Hybrid heating was developed to raise sample temperature uniformly in a short period of time This leads to unidirectional sintering which enables sample to be sintered layer by layer from the bottom, resulting in more stable shape of interconnection at the top surface of the sample than conventional electric furnace heating. When sintering properties of substrate and electrical/mechanical properties of interconnection were compared, hybrid heating showed possibility to be applicable to substrate miniaturization and interconnection densification superior to electric furnace heating.

• Journal of the Korea Concrete Institute
• /
• v.20 no.6
• /
• pp.741-746
• /
• 2008

Many methods have been introduced to protect the corrosion of embedded steel in RC structure. One of the methods that restrain corrosion of steel is corrosion inhibitor. The technology that delayed the progress of corrosion is developed recently by converting active rust to passive rust. However, the performance for concrete structure is not fully examined because this corrosion inhibitor is developed for normal metal product. In this study, the application of corrosion inhibitor that use tannin acid is investigated by concrete specimen. According to the results, tannin acid corrosion inhibitor does not occur reduction of workability and strength in concrete. When corrosion inhibitor is added more than 4% per cement weight, the penetration depth of chloride decrease about 10%. Also, corrosion resistance of concrete is improved because tannin acid corrosion inhibitor has an effect on converting the rust of steel into stable state. It is showed in special that the addition more than 6% is effective in corrosion resistance.

• Journal of the Korean Arthroscopy Society
• /
• v.2 no.2
• /
• pp.124-128
• /
• 1998

From Feb. 1996 to Feb. 1997. among sixty-four patients of anterior cruciate ligament(ACL) reconstruction using multi-stranded hamstring tendon and EndoButton fixation, twenty-five patients of volunteer, 15 men and 10 women, from 16 to 50 years of age(mean 27.6 years) underwent arthroscopic evaluation. Arthroscopic evaluation was routinely performed one year after surgery along with an examination of stability. The purpose of this study was to arthroscopically evaluate the morphological changes that occurred in hamstring tendon autograft one year after ACL reconstruction. Both of the tendon graft and the adjacent fibrous tissues were observed for gross appearance and physical properties with probing and response to passive anterior translation. Biopsy samples were taken from the surrounding fibrous tissue and the tendon graft. Grossly, we found a well-defined ligamentous structure with good tension tested with a probe. A common finding was that the reconstructed ligaments were embedded in a layer of the synovium, and blood vessels could be seen on the anterior surface of the ligament. The biopsy tissue was placed in formalin solution and subjected to histological preparation by hematoxylin and eosin staining method. The hamstring tendon graft appeared histologically normal under light microscopic finding. There were a few vessels located between existing collagen bundles, and the vessels had an orderly pattern. The surrounding fibrous tissue envelope was covered with synovium. We pleased with preliminary findings in our evaluation.