• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1454-1470
• /
• 2014

This paper propose a new power conditioner topology with intelligent power management controller that integrates multiple renewable energy sources such as solar energy, wind energy and fuel cell energy with battery backup to make best use of their operating characteristics and obtain better reliability than that could be obtained by single renewable energy based power supply. The proposed embedded controller is programmed for maintaining a constant voltage at PCC, maximum power point tracking for solar PV panel and WTG and power flow control by regulating the reference currents of the controller on instantaneous basis based on the power delivered by the sources and load demand. Instantaneous variation in reference currents of the controller enhances the controller response as it accommodates the effect of continuously varying solar insolation and wind speed in the power management. The power conditioner uses a battery bank with embedded controller based online SOC estimation and battery charging system to suitably sink or source the input power based on the load demand. The simulation results of the proposed power management system for a standalone solar/WTG/fuel cell fed hybrid power supply with real time solar radiation and wind velocity data collected from solar centre, KEC for a sporadically varying load demand is presented in this paper and the results are encouraging in reliability and stability perspective.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11A
• /
• pp.1059-1067
• /
• 2006

AODV(Ad-hoc On-demand Distance Vector) routing protocol was devised for use of mobile nodes in Ad-hoc network. When we use the AODV routing protocol in Ad-hoc networks with high mobility, disturbance of optimized route path and link break occur. In order to solve the shortcomings, this paper proposes a new routing protocol in which new routing control messages are added to the existing AODV. The proposed protocol minimizes link break and transmission delay while is able to secure the optimized route path constantly in changes of network topology The performance of the proposed routing protocol was evaluated by using us2 network simulator. The actual Ad-hoc network test bed provides us the most reliable experimental data for Ad-hoc networks. In order to support this experimental environment, the dissertation also developed an efficient embedded system on which AODV routing protocol, NAT, Netfilter can run and other event message can be verified without declining efficiency. The correct operation of AODV routing protocol has been verified in both the Ad-hoc network test bed in which the embedded system was used, and Ad-hoc networks linked with Ethernet backbone network.

• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.4
• /
• pp.169-175
• /
• 2005

In recent, implementation of the embedded system is gradually in the spotlight of world-wide by information technology(IT) engineers. By this time, an implementation of real time system is limited on image acquisition and processing system in practical. In this paper, the USB camera interface system based on the embedded linux OS is implemented using USB 2.0 camera with low cost. This system can obtain image signals into the memory via X-hyper255B processor from USB camera. It is need to initialize USB camera by the Video4Linux for the kernel device driver. From the system image capturing and image processing can be performed. It is confirmed that the image data can be transformed to packet of Network File System(NFS) and connected to the internetwork, then the data can be monitored from the client computer connected to the internetwork.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.5
• /
• pp.219-226
• /
• 2012

The rises of the life index quality together with the medical technology improvement lead to a longer life expectancy. Then a better health care program, especially for elderly, is needed. The common health problems facing those senior citizens are changed from acute diseases to chronic diseases, such as diabetes, hypertension. Then u-Health takes center stage in medical industry. Although u- Health medical device manufacturers have been improving their instruments, these instruments still rely on proprietary technologies without fixed platform. Even if the interface has been provided by the manufacturer, there is no widely-accepted uniform data model to access data of various u-Health devices. IEEE 11073 is a standard attempting to unify the interfaces of all medical devices. In this paper we have proposed a conversion software platform that assures interoperability among medical devices for ubiquitous sensor network. This module uses in order to develop a standard platform of medical system.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.4
• /
• pp.165-175
• /
• 2019

Networks use relatively slow heartbeat mechanisms, usually in routing protocols, to detect failures when there is no hardware signaling to help out. The time to detect failures available in the existing protocols is no better than a second, which is far too long for some applications and represents a great deal of lost data at 10 Gigabit rates. We compare the convergence time of routing protocol applying Bidirectional Forwarding Detection (BFD) protocol in wired mesh network topology. This paper suggests the combinations of protocols improving fail-over performance. Through the performance analysis, we contribute to reduce convergence time when system is fail-over.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.1
• /
• pp.15-20
• /
• 2016

Recently, the u-IT applications for plants and livestock become larger and control of livestock farm environment has been used important in the field of industry. We implemented wireless sensor networks and farm environment automatic control system for applying to the breeding barn environment by calculating the THI index. First, we gathered environmental information like livestock object temperature, heart rate and momentum. And we also collected the farm environment data including temperature, humidity and illuminance for calculating the THI index. Then we provide accurate control action roof open and electric fan in of intelligent farm to keep the best state automatically by using collected data. We believed this technology can improve industrial competitiveness through the u-IT based smart integrated management system introduction for industry aversion and dairy industries labor shortages due to hard work and old ageing.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.3
• /
• pp.26-32
• /
• 2022

EtherCAT is an Ethernet-based fieldbus system standardized in IEC 61158 and SEMI, and widely used in the fields of factory automation, semiconductor equipment and robotics. In this paper, an EtherCAT master is implemented on an embedded board with Arm based 64-bit quad-core processor and its jitter performance is evaluated at the output of the network interface to include all the effects of the entire system in the results. For the EtherCAT master system, an open source EtherCAT master stack, Simple Open EtherCAT Master (SOEM), is installed on PREEMPT_RT patched Linux operating system for real-time operation. The results show that the jitter performance is comparable to that of Xenomai-based master and the EtherCAT master with two master instances has similar jitter performance to the EtherCAT master with one master instance.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.912-916
• /
• 2004

The home network is the technique to guarantee a safe, economical, socially integrated, and healthy life to the family and it provides domestic safety, instrument control, controllable energy and health monitoring by the connection of the home appliances using wired and wireless networks. A home control system has been developed for managing and controlling home appliances. This paper designs the broadband PLC home controller using broadband PLC technology which can save much cost at a network infrastructure using the existing power line at a home and design the USB home controller using USB technology which is low cost and has many goods with it. And the embedded home server manages those. The CDMA module provides mobile functions to the home control system in this paper. And we choose the OSGi specification which is compatible with other home middleware and can accept various communication techniques of home network

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2511-2518
• /
• 2014

An ERS(Embedded Rail System) has large effect on the load distribution because of its continuous rail support. Therefore, stress level of the track components is lower than that of other system. Though the ERS has various advantages, the application example in a domestic railway is rarely applied and the studies for the application of high-speed service lines are insufficient. In this paper, the vertical stiffness is derived from laboratory test and the optimized cross-section is also derived from the analytical analysis as a basic study for application of ERS on the high-speed service lines.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.05a
• /
• pp.443-447
• /
• 2005

EMAST(Embedded Mobile Automatic System for Telematics) is implemented in SoC using the CAN and ARM Processor. For the general usage, EMAST must satisfy the two condition. First, Mobile internal interface is to be designed to support Differential Transceiver, Optical Transceiver and Wireless Transceiver Second, it should be supporting the interface between terminals using EMAST and telematics networks. In this paper, we propose EMAST structure and the efficient interface structure between EMAST and each mobile units.