• Journal of Internet Computing and Services
• /
• v.9 no.6
• /
• pp.117-125
• /
• 2008

With increase of concern about the Ubiquitous application, the necessity of the computer system which is miniaturized is becoming larger. The ARM processor is showing a high share from embedded system market. In this paper, ideal method for RTD-1000 controller construction and development is described using ARM microcontroller. Existing RTD-1000 measures distance of disconnection or defect of sensing casket by measuring receiving reflected wave which was sent via copper wire inside the leaking sensing rod. Using this RTD-1000, leakage and breakage of water and oil pipe can be sensed and it reports damage results to the networks. But, existing RTD-1000 wastes hardware resources much and costs a great deal to installation. Also, it needs a cooling device because the heating problem, and has some problem of the secondary memory unit such as the hard disk. So, long tenn maintenance has some problems in the outside install place. In this paper, for the resolving the problem of RTD-1000, RTD-1000A embedded system based on ARM is proposed and simulated.

• Journal of KIISE:Information Networking
• /
• v.29 no.6
• /
• pp.685-695
• /
• 2002

Recently, there has been increasingly demand for connecting a embedded device to the Internet. Jini technology is interested in automatically composing a distributed network with devices But, there are some problems that the device needs high hardware requirements to adopt Jini technology for supporting Jini-enabled services. In this paper, we focused on design and implementation of surrogate system that supports non-Java devices in Jini networks. This system and protocol are implemented in Java language. The surrogate system delegates Discovery and Join processing to support a Jini service in connected networks. A Jini client can use service of the device through the surrogate system. We tested a Jini sample program to verify the implemented surrogate system. In the test result, we showed that the Jini client can use functionalities and operations of the non-Java device through the surrogate system.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.2
• /
• pp.125-131
• /
• 2010

This paper presents the implementation of a EBCOT TIER-1 for JPEG2000 Encoder. JPEG2000 is new standard for the compression of still image for overcome the artifact of JPEG. JPEG2000 standard is based on DWT(Discrete Wavelet Transform) and EBCOT Entropy coding technology. EBCOT(Embedded block coding with optimized truncation) is the most important technology that is compressed the image data in the JPEG2000. However, EBCOT has the artifact because the operations are bit-level processing and occupy the harf of the computation time of JPEG2000 Compression. Therefore, in this paper, we present modified context extraction method for enhance EBCOT computational efficiency and implemented MQ- Coder as arithmetic coder. The proposed system is implemented by Verilog-HDL, under the condition of TSMC 0.25um ASIC library, gate counts are 30,511EA and satisfied the 50MHz operating condition.

• The Journal of the Korea Contents Association
• /
• v.8 no.8
• /
• pp.37-46
• /
• 2008

Launch control system controls the sequence for launching missile in weapon systems. This system have to generate the engagement plan, input information and launch the missile in timeliness requirement. Such a system may fail to operate correctly either due to errors in hardware and software or due to violation of timing constraints. We presented fault-tolerant ethernet for embedded real-time system like launch control system. This approach is designed to handle network faults using dual commercial-off-the-shelf(COTS) network devices. To support fault-tolerant ethernet each node is composed dual channel ethernet and designed the communication middleware for network fault detect and recovery. Especially for time-critical system, the middleware is being developed to achieve that no point of network failure shall take down or cause loss of communication to network nodes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.96-103
• /
• 2009

This paper presents a L3 mobile terminal platform of the mobile terminal system which is a subsystem of HMm(Hig-speed Mobile Multimedia) system, which layer 3 control protocols such as RC(Radio Control), SC(Session Control), MC(Mobility Control) and application services such as VOD, FTP, VoIP for a multimedia mobile terminal are implemented on. The hardware platform is based on PXA255 and supports various interfaces and multimedia devices, and under the platform, an embedded Linux generated by the self-maden cross-toolchain, L3 control protocols and application programs were installed. The operation of HMm system under the HMm testbed has shown that this platform successfully supported SIP services, web browsing services, streaming services and etc as well as call processing. It could be the reference of the upcoming Fourth-Generation mobile terminal which the multimedia functionality will be enforced.

• The Journal of the Korea Contents Association
• /
• v.8 no.9
• /
• pp.42-54
• /
• 2008

In recent years, embedded systems have been expanding their application domains from traditional embedded systems such as military weapons, robots, satellites and digital convergence systems such as celluar phones, PMP(Portable Multimedia Player), PDAs(Personal Digital Assistants) to Next Generation Personal Computers(NGPCs) such as eating PCs, wearable computers. The NGPCs are network-based, human-centric digital information devices diverged from the traditional PCs used mainly for document writing, internet searching and database management. Wearable computers with battery capacity and memory size limitations have to use real-time operating systems with small footprints and low power management techniques to provide user's QoS in spite of hardware constraints. In this paper, we have designed and implemented a low-power RTOS (called eRTOS) for wearable computers. The implemented eRTOS has 18KB footprints and the dynamic power management and the device power management schemes are adapted in it. Experimental results with wearable computer applications show that the low power techniques could save energy up to 47 %.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.3
• /
• pp.179-185
• /
• 2017

The problem that occurred in the design/fabrication/testing of the wideband transmitting power amplifier for an embedded active SONAR (Sound Navigation and Ranging) system operating underwater was analyzed and the solution of the problem was proposed in this paper. Wideband acoustic SONAR systems had been developed in order to improve the underwater detection performance. The underwater acoustic transmission system had been also developed to achieve the wideband SONAR system. In this paper, the wideband acoustic transmission signal was generated using a 2 Level sawtooth type Class D PWM (Pulse Width Modulation) which was not complicated to implement. When the sonar signals having two or more frequencies were simultaneously generated, parasitic frequencies were added to the original signals by integer multiples of the frequency difference of the original signal. To cope with this problem, we proposed a way to remove the parasitic frequency from the source signal through modeling and simulation of the implemented power amplifier and PWM control hardware using MATLAB and Simulink.

• Convergence Security Journal
• /
• v.10 no.1
• /
• pp.49-53
• /
• 2010

Recently multimedia has been formed, provided, and shared enough not to compare with the past, due to the proliferation of Internet and the development of hardware relating to multimedia. Accordingly to internationally give a proper expression to metadata of multimedia, the standard of MPEG-7 has been established, and researches for image search among various data of multimedia using MPEG-7 are going on. Thus there are meaning-based search. In the former there is a merit that search speed is fast, but technology and accuracy by technical knowledge on the image. In the latter the accuracy of search is decreasing because of not understanding the meaning about image and the internet of users. In this study to solve these problems a search system has been designed by combining the two methods. Also the search and manage image data by handheld devices such as portable PDA or smart phone, a system. Once this is used, multimedia data can be efficiently searched and utilized by handheld devices.

• Journal of Digital Contents Society
• /
• v.18 no.3
• /
• pp.607-612
• /
• 2017

The use of RaspberryPi in building an embedded system may be difficult for users in understanding the circuit and the hardware cost. This paper proposes a solution that can test the systems virtually. The solution consists of three elements; (i) editor, (ii) interpreter and (iii) simulator and provides nine full modules and also allows the users to configure/run/test their own circuits like real environment. The task of abstraction for modules through the actual circuit test was carried out on the basis of the data sheet and the specification provided by the manufacturer. If we can improve the level of quality of our solution, it can be useful in terms of cost reduction and easy learning. To achieve this end, the electrical physics engine, the level of interpreter that can be ported to the actual board, and a generalization of the simulation logic are required.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.139-140
• /
• 2017

This technology employs a method of forming a single-ply PLUS waterproofing sheet layer comprised of applying a single-ply synthetic polymer layer on a vibrating structure (steel frame, RC) or an inclined surface by using a T joint lap-filling coil and an embedded metal coated sheet. The T - joint reinforcing lap-filling coil was used to block the ingress channel of the rainwater by applying the material in the vulnerable area where the three sides of the waterproof sheet overlapped. Conventional waterproofing techniques have a problem in that the waterproof sheet is pierced because the end portion of the waterproof sheet applied to the vertical portion is fixed by a nail, and the sealant applied to the end portion of the sheet cannot easily secure long-term waterproof durability due to the influence of the external environment. Therefore, the developed technology secured the waterproof durability against the vertical part by using the embedded metal sheet. In addition, automatic hot-air fusing is used to improve the quality of waterproof construction and point fixation method using fixed hardware. This is a technology that is not significantly restricted in the high degradation level regions of domestic waterproof construction environments in Korea such as low-temperature environment, wet floor.