• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.233-238
• /
• 2016

Recently, the multi-core processor architecture is widely adopted in the embedded processors for enhancing its performance. Multi-core processors are classified either as symmetric or asymmetric. Asymmetric multicore processors are known to score higher performance and more efficient than symmetric multi-core processors. In order to study the performance enhancement of asymmetric multi-core embedded processors over the symmetric ones, the trace-driven simulation has been executed for various asymmetric embedded dual-core, quad-core, octa-core and hexadeca-core processors and compared with the symmetric ones of similar hardware budget using MiBench benchmarks as input.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2016

We proposed a load unbalancing scheduling method for energy-efficient multi-core embedded systems considering DVFS (Dynamic Voltage/Frequency Scaling) power consumption and task characteristics. It is a new kind of scheduler which combines load balancing and load unbalancing technique. The purpose of the method is to effectively utilize energy without much effect in performance. In this paper, we conduct experiments on energy consumption and performance using the previous load balancing and unbalancing techniques and our proposed technique. The proposed technique reduced energy consumption more than 13.7% when compared to other algorithms. As a result, the proposed technique shows low energy consumption without much decline in the performance and is adequate for energy-efficient multi-core embedded systems.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.17 no.6
• /
• pp.375-382
• /
• 2022

This paper proposes a multi-core cooperative computing structure considering the heterogeneous features of automotive embedded on-chip software. The automotive embedded software has the heterogeneous execution flow properties for various hardware drives. Software developed with a homogeneous execution flow without considering these properties will incur inefficient overhead due to core latency and load. The proposed method was evaluated on an target board on which a automotive MCU (micro-controller unit) with built-in multi-cores was mounted. We demonstrate an overhead reduction when software including common embedded system tasks, such as ADC sampling, DSP operations, and communication interfaces, are implemented in a heterogeneous execution flow. When we used the proposed method, embedded software was able to take advantage of idle states that occur between heterogeneous tasks to make efficient use of the resources on the board. As a result of the experiments, the power consumption of the board decreased by 42.11% compared to the baseline. Furthermore, the time required to process the same amount of sampling data was reduced by 27.09%. Experimental results validate the efficiency of the proposed multi-core cooperative heterogeneous embedded software execution technique.

• Journal of IKEEE
• /
• v.17 no.4
• /
• pp.564-569
• /
• 2013

The current embedded devices are growing rapidly in the multi-core, and these demand fast boot time. But method of previous boot uses core only one. The method includes parallel techniques and modification of CPU Frequency policy. Parallel methods, after analyzing the Android boot process with analysis tool, applied to location where a lot of CPU operation. CPU Frequency policy is modified for high performance of core. The proposed method was applied to S5PV310 dual core and Exynos4412 quad core embedded system. As a result of the experiment, we found that the proposed method makes boot time fast about 20.71% and 31.34% in dual core and quad core environment as compared with the previous method.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.4
• /
• pp.231-241
• /
• 2011

Recently, system virtualization has been applied to consumer electronics (CE) such as smart mobile phones. Although multi-core processors have become a viable solution for complex applications of consumer electronics, the issue of utilizing multi-core resources in the virtualization layer has not been researched sufficiently. In this paper, we present a new hypervisor design and implementation for multi-core CE devices. We concretely describe virtualization methods for a multi-core processor and multi-core-related subsystems. We also analyze bottlenecks of network performance in a virtualization environment that supports multimedia applications and propose an efficient virtual interrupt distributor. Our new multi-core hypervisor improves network performance by 5.5 times as compared to a hypervisor without the virtual interrupt distributor.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.163-169
• /
• 2013

Recently, the importance of embedded system is growing rapidly. In-order to satisfy the real-time constraints of the system, high performance embedded processor is required. Therefore, as in general purpose computer systems, embedded processor should be designed as multicore architecture as well. Using MiBench benchmarks as input, the trace-driven simulation has been performed and analyzed for the 2-core to 16-core embedded processor architectures with different types of cores from simple RISC to in-order and out-of-order superscalar processors, extensively. As a result, the achievable performance is as high as 23 times over the single core embedded RISC processor.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1413-1421
• /
• 2014

This paper realize power control embedded system with one master of Core-A 32-bit RISC processor and several slaves controling power with synchronized digital signals. Core-A platform is consisted of Core-A processor, AMBA bus, SSRAM, AC97, DMA, UART, GPIO etc. Slave is made by both digital part and analog part. The former generates various power control patterns synchronized with master signal. The latter converts 220V power proportional to 4 bit digital signals. design of Embedded system is executed in Flowrian II, in which software is cross-compiled and hardware is verified by simulation. Embedded system is implemented in FPGA board and CPLD chips as well as PCB board for analog power control.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.8 no.2
• /
• pp.87-93
• /
• 2013

In this paper, we implemented and evaluated the performance of a vector-based rasterization algorithm of 3D graphics using a SIMD-based many-core processor that consists of 4,096 processing elements. In addition, we compared the performance and efficiency of the rasterization algorithm using the many-core processor and commercial GPU (Graphics Processing Unit) system which consists of 7 GPUs and each of which have 512 cores. Experimental results showed that the SIMD-based many-core processor outperforms the commercial GPU system in terms of execution time (3.13x speedup), energy efficiency (17.5x better), and area efficiency (13.3x better). These results demonstrate that the SIMD-based many-core processor has potential as an embedded mobile processor.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.4
• /
• pp.251-257
• /
• 2016

The multi-core technology has become pervasive in embedded systems. An implementation of the Doppler Beam Sharpening algorithm that improves the azimuth resolution by using doppler frequency shift is possible only in multi-core environment because of the amount of calculation. In this paper, we design of multi-core architecture for a real time implementation of DBS algorithm. And based on designed structure, we produce a DBS image on P4080 board.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.809-812
• /
• 2013

This paper realize power control embedded system with one master of Core-A 32-bit RISC processor and several slaves controling power with synchronized digital signals. Core-A platform provided by Dynalith Systems consists of Core-A processor, AMBA bus, SSRAM, AC97, DMA, UART, GPIO etc. Slave is made by both digital part and analog part. The former generates various power control patterns synchronized with master signal. The latter converts 220V power proportional to 4 bit digital signals. Design of Embedded system is executed in Flowrian2 of System Centroid Inc., in which software is cross-compiled and hardware is verified by simulation. Embedded system is implemented in FPGA board and CPLD chips as well as PCB board for analog power control.