• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.4
• /
• pp.10-18
• /
• 2018

The primary purposes of this study are to understand a fundamental aspect of current uniformity around a reinforcing bar (rebar) in cement mortar, and to develop an accurate monitoring method in a wet-dry cycling process with the alternative current (AC) impedance method. Three cement mortar specimens with two embedded rebars were prepared in the laboratory. As a main variable, the distance between two rebars was designed to be 10, 20 and 30 mm with the same thickness of 20 mm. To simulate the corrosion of rebars in concrete structures in a marine environment, three cement mortar specimens were exposed to 15 wet-drying cycles (24-hour-immersion in seawater and 48-hour-drying in a room temperature) in the laboratory. It was observed that the potential level shifted to a noble value during corrosion potential monitoring, which is attributed to acceleration of dissolved oxygen diffusion at the drying process. AC impedance was measured in a frequency range from 100 kHz to 1 mHz on a wet-drying process. A theoretical model was proposed to explain the interface condition between the rebars and cement mortar by using the equivalent circuit consisting of a solution resistance, a charge transfer resistance and a CPE (constant phase element). It was observed that the diffusion impedance appeared in a low frequency range as corrosion of rebars progresses. At the drying stage of the wet-drying cycles, the currents line for monitoring tended to be non-uniform at the interface of rebar/mortar, being phase shift, ${\theta}$, close to $-45^{\circ}$.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.106-121
• /
• 2007

The purpose of this study was to examine the effects of suggested etching method on the performance of pits and fissures sealant. In the first part, seventy extracted sound human permanent third molars and premolars were used. The teeth were randomly divided and performed in three different groups as follows : conventional etching, enameloplasty, and testing group. Non-pumicing, dye-guidance vigorous brushing-start etching technique was applied on the occlusal of testing group. Then the pit and fissure sealant was applied on all of the specimens. After the thermocycling and immersing in 1% methylene blue, the resin embedded sections were made. The microleakage data on the section were then recorded under the stereoscope and statistic analysis was done. Additional experiments were also performed : direct fissure surface etched pattern experiment, replica study, and micro-shear bond strength testing observation. The second part included two groups. A paired study was designed to evaluate the influence the environment has on the performance of the sealant. After etching, half of each occlusal surface received one of the two following treatments in succession: sealing in laboratory and intraoral condition (group 1), sealing in intraoral condition with and without a single-bonding agent (group 2). The results of present study can be summarized as follows: - The microleakage of testing group was significant different with conventional method (P<.05) and was not different with the enameloplasty group (P>.05). - The quality and quantity of etched enamel were improved. - Microshear bond strength of testing group was higher than control group (p<.05). - The environmental condition was influenced on the performance of the sealant. The testing etching method modified the capacity of the etching agent to penetrate into the pits and fissures, and simultaneous enhance their efficiency in vitro condition.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09c
• /
• pp.72-77
• /
• 2010

The Incheon Bridge, which was opened to the traffic in October 2009, is an 18.4 km long sea-crossing bridge connecting the Incheon International Airport with the expressway networks around the Seoul metropolitan area by way of Songdo District of Incheon City. This bridge is an integration of several special featured bridges and the major part of the bridge consists of cable-stayed spans. This marine cable-stayed bridge has a main span of 800 m wide to cross the vessel navigation channel in and out of the Incheon Port. In waterways where ship collision is anticipated, bridges shall be designed to resist ship impact forces, and/or, adequately protected by ship impact protection (SIP) systems. For the Incheon Bridge, large diameter circular dolphins as SIP were made at 44 locations of the both side of the main span around the piers of the cable-stayed bridge span. This world's largest dolphin-type SIP system protects the bridge against the collision with 100,000 DWT tanker navigating the channel with speed of 10 knots. Diameter of the dolphin is up to 25 m. Vessel collision risk was assessed by probability based analysis with AASHTO Method-II. The annual frequency of bridge collapse through the risk analysis for 71,370 cases of the impact scenario was less than $0.5{\times}10^{-4}$ and satisfies design requirements. The dolphin is the circular sheet pile structure filled with crushed rock and closed at the top with a robust concrete cap. The structural design was performed with numerical analyses of which constitutional model was verified by the physical model experiment using the geo-centrifugal testing equipment. 3D non-linear finite element models were used to analyze the structural response and energy-dissipating capability of dolphins which were deeply embedded in the seabed. The dolphin structure secures external stability and internal stability for ordinary loads such as wave and current pressure. Considering failure mechanism, stability assessment was performed for the strength limit state and service limit state of the dolphins. The friction angle of the crushed stone as a filling material was reduced to $38^{\circ}$ considering the possibility of contracting behavior as the impact.

• The Korean Journal of Mycology
• /
• v.10 no.1
• /
• pp.7-13
• /
• 1982

Habit characteristics of imperfect and perfect stage of D. bryoniae encountered on naturally infected seeds of cucumber and pumpkin were studied by the blotter method and compared with those grown on Difco potato dextrose agar (PDA), V-8 juice agar and water agar leaf medium (WALM). Most of the pycnidiospores obtained from each isolate of this fungus grown on PDA were non-septate and microtype. Non-septate pycnidiospores were predominanted in all isolates, but a macrotype of the non-septate and a number of uniseptate pycnidiospores were produced on V-8 juice agar and water agar leaf medium. On seed the pycnidiospores were mostly non -septate, but rarely uniseptate ones were also found. On radicle of cucumber seed, the pycnidiospores were non-septate and uniseptate but small percentage biseptate with somewhat constricted at septa. Pycnidiospores produced on V-8 juice agar and water agar leaf medium were similar to those produced on seeds. In the present investigation the perithecia were mostly globose to subglobose with apical papillate ostiole and whitish spore masses formed on the ostiole of perithecia, either on naturally infected seed or on culture media. The mature perithecia were dark brown to black. They were partially embedded or erumpent on seed coat and culture media. The perithecia varied in size within a much narrower range than the pycnidia. But perithecial formation of this fungus on PDA, V-8 juice agar, WALM and seed varied considerably depending upon isolate and culture media.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.2
• /
• pp.115-121
• /
• 2022

As city environments have recently become crowded, there are many obstacles that interfere with the walking of the visually impaired on pedestrian roads. Typical examples include ballads, parking breakers and standing signs, which usually do not get in the way, but blind people may be injured by collisions. To solve such a problem, many solutions have been proposed, but they are limited in applied in practical environments due to the several restrictions such as outside use only, inaccurate obstacle sensing and requirement of special devices. In this paper, we propose a new method to automatically detect obstacles while walking on the pedestrian roads and warn the collision risk in advance by using only sensors embedded in typical mobile phones. The proposed method supports the walking of the visually impaired by notifying the type of obstacles appearing in front of them as well as the distance remaining from the obstacles. To accomplish this goal, we utilized an object recognition technology applying the latest deep learning algorithms in order to identify the obstacles appeared in real-time videos. In addition, we also calculate the distance to the obstacles using the number of steps and the pedestrian's stride. Compared to the existing walking support technologies for the visually impaired, our proposed method ensures efficient and safe walking with only simple devices regardless of the places.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.1
• /
• pp.184-203
• /
• 2020

The Confucian ruling class of the Joseon Dynasty regarded Buddhist rituals as "dangerous festivals." However, these Buddhist ceremonies facilitated transitions between phases of life from birth till death and strengthened communal unity through their joint practice of the rites. Ritual spaces were decorated with various utensils and objects that transformed them into wondrous arenas. Of these ornaments, Buddhist paintings served as the most effective visual medium for educating the common people. As an example, a painting of the Ten Kings of the Underworld (siwangdo) could be hung as a means to illustrate the Buddhist view of the afterlife, embedded in images not only inside a Buddhist temple hall, but in any space where a Buddhist ritual was being held. Demand for Buddhist paintings rose considerably with their use in ritual spaces. Nectar ritual paintings (gamnodo), including scenes of appeasement rites for the souls of the deceased, emphasized depictions of royal family members and their royal relatives. In Chinese paintings of the water and land ceremony (suryukjae), these figures referred to one of several sacred groups who invited deities to a ritual. However, in Korean paintings of a nectar ritual, the iconography symbolized the patronage of the royal court and underlined the historicity and tradition of nationally conducted water and land ceremonies. This royal patronage implied the social and governmental sanction of Buddhist rituals. By including depictions of royal family members and their royal relatives, Joseon Buddhist paintings highlighted this approval. The Joseon ruling class outwardly feared that Buddhist rituals might undermine observance of Confucian proprieties and lead to a corruption of public morals, since monks and laymen, men and women, and people of all ranks mingled within the ritual spaces. The concern of the ruling class was also closely related to the nature of festivals, which involved deviation from the routines of daily life and violation of taboos. Since visual media such as paintings were considered to hold a special power, some members of the ruling class attempted to exploit this power, while others were apprehensive of the risks they entailed. According to Joseon wangjo sillok (The Annals of the Joseon Dynasty), the Joseon royal court burned Buddhist paintings and ordered the arrest of those who created them, while emphasizing their dangers. It further announced that so many citizens were gathering in Buddhist ritual spaces that the capital city was being left vacant. However, this record also paradoxically suggests that Buddhist rituals were widely considered festivals that people should participate in. Buddhist rituals could not be easily suppressed since they performed important religious functions reflecting the phases of the human life cycle, and had no available Confucian replacements. Their festive nature, unifying communities, expanded significantly at the time. The nectar ritual paintings of the late Joseon period realistically delineated nectar rituals and depicted the troops of traveling actors and performers that began to emerge during the seventeenth century. Such Buddhist rituals for consoling souls who encountered an unfortunate death were held annually and evolved into festivals during which the Joseon people relieved their everyday fatigue and refreshed themselves. The process of adopting Buddhist rituals-regarded as "dangerous festivals" due to political suppression of Buddhism in the Confucian nation-as seasonal customs and communal feasts is well reflected in the changes made in Buddhist paintings.

• Asia pacific journal of information systems
• /
• v.20 no.2
• /
• pp.63-86
• /
• 2010

Personalized services directly and indirectly acquire personal data, in part, to provide customers with higher-value services that are specifically context-relevant (such as place and time). Information technologies continue to mature and develop, providing greatly improved performance. Sensory networks and intelligent software can now obtain context data, and that is the cornerstone for providing personalized, context-specific services. Yet, the danger of overflowing personal information is increasing because the data retrieved by the sensors usually contains privacy information. Various technical characteristics of context-aware applications have more troubling implications for information privacy. In parallel with increasing use of context for service personalization, information privacy concerns have also increased such as an unrestricted availability of context information. Those privacy concerns are consistently regarded as a critical issue facing context-aware personalized service success. The entire field of information privacy is growing as an important area of research, with many new definitions and terminologies, because of a need for a better understanding of information privacy concepts. Especially, it requires that the factors of information privacy should be revised according to the characteristics of new technologies. However, previous information privacy factors of context-aware applications have at least two shortcomings. First, there has been little overview of the technology characteristics of context-aware computing. Existing studies have only focused on a small subset of the technical characteristics of context-aware computing. Therefore, there has not been a mutually exclusive set of factors that uniquely and completely describe information privacy on context-aware applications. Second, user survey has been widely used to identify factors of information privacy in most studies despite the limitation of users' knowledge and experiences about context-aware computing technology. To date, since context-aware services have not been widely deployed on a commercial scale yet, only very few people have prior experiences with context-aware personalized services. It is difficult to build users' knowledge about context-aware technology even by increasing their understanding in various ways: scenarios, pictures, flash animation, etc. Nevertheless, conducting a survey, assuming that the participants have sufficient experience or understanding about the technologies shown in the survey, may not be absolutely valid. Moreover, some surveys are based solely on simplifying and hence unrealistic assumptions (e.g., they only consider location information as a context data). A better understanding of information privacy concern in context-aware personalized services is highly needed. Hence, the purpose of this paper is to identify a generic set of factors for elemental information privacy concern in context-aware personalized services and to develop a rank-order list of information privacy concern factors. We consider overall technology characteristics to establish a mutually exclusive set of factors. A Delphi survey, a rigorous data collection method, was deployed to obtain a reliable opinion from the experts and to produce a rank-order list. It, therefore, lends itself well to obtaining a set of universal factors of information privacy concern and its priority. An international panel of researchers and practitioners who have the expertise in privacy and context-aware system fields were involved in our research. Delphi rounds formatting will faithfully follow the procedure for the Delphi study proposed by Okoli and Pawlowski. This will involve three general rounds: (1) brainstorming for important factors; (2) narrowing down the original list to the most important ones; and (3) ranking the list of important factors. For this round only, experts were treated as individuals, not panels. Adapted from Okoli and Pawlowski, we outlined the process of administrating the study. We performed three rounds. In the first and second rounds of the Delphi questionnaire, we gathered a set of exclusive factors for information privacy concern in context-aware personalized services. The respondents were asked to provide at least five main factors for the most appropriate understanding of the information privacy concern in the first round. To do so, some of the main factors found in the literature were presented to the participants. The second round of the questionnaire discussed the main factor provided in the first round, fleshed out with relevant sub-factors. Respondents were then requested to evaluate each sub factor's suitability against the corresponding main factors to determine the final sub-factors from the candidate factors. The sub-factors were found from the literature survey. Final factors selected by over 50% of experts. In the third round, a list of factors with corresponding questions was provided, and the respondents were requested to assess the importance of each main factor and its corresponding sub factors. Finally, we calculated the mean rank of each item to make a final result. While analyzing the data, we focused on group consensus rather than individual insistence. To do so, a concordance analysis, which measures the consistency of the experts' responses over successive rounds of the Delphi, was adopted during the survey process. As a result, experts reported that context data collection and high identifiable level of identical data are the most important factor in the main factors and sub factors, respectively. Additional important sub-factors included diverse types of context data collected, tracking and recording functionalities, and embedded and disappeared sensor devices. The average score of each factor is very useful for future context-aware personalized service development in the view of the information privacy. The final factors have the following differences comparing to those proposed in other studies. First, the concern factors differ from existing studies, which are based on privacy issues that may occur during the lifecycle of acquired user information. However, our study helped to clarify these sometimes vague issues by determining which privacy concern issues are viable based on specific technical characteristics in context-aware personalized services. Since a context-aware service differs in its technical characteristics compared to other services, we selected specific characteristics that had a higher potential to increase user's privacy concerns. Secondly, this study considered privacy issues in terms of service delivery and display that were almost overlooked in existing studies by introducing IPOS as the factor division. Lastly, in each factor, it correlated the level of importance with professionals' opinions as to what extent users have privacy concerns. The reason that it did not select the traditional method questionnaire at that time is that context-aware personalized service considered the absolute lack in understanding and experience of users with new technology. For understanding users' privacy concerns, professionals in the Delphi questionnaire process selected context data collection, tracking and recording, and sensory network as the most important factors among technological characteristics of context-aware personalized services. In the creation of a context-aware personalized services, this study demonstrates the importance and relevance of determining an optimal methodology, and which technologies and in what sequence are needed, to acquire what types of users' context information. Most studies focus on which services and systems should be provided and developed by utilizing context information on the supposition, along with the development of context-aware technology. However, the results in this study show that, in terms of users' privacy, it is necessary to pay greater attention to the activities that acquire context information. To inspect the results in the evaluation of sub factor, additional studies would be necessary for approaches on reducing users' privacy concerns toward technological characteristics such as highly identifiable level of identical data, diverse types of context data collected, tracking and recording functionality, embedded and disappearing sensor devices. The factor ranked the next highest level of importance after input is a context-aware service delivery that is related to output. The results show that delivery and display showing services to users in a context-aware personalized services toward the anywhere-anytime-any device concept have been regarded as even more important than in previous computing environment. Considering the concern factors to develop context aware personalized services will help to increase service success rate and hopefully user acceptance for those services. Our future work will be to adopt these factors for qualifying context aware service development projects such as u-city development projects in terms of service quality and hence user acceptance.