• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2004년도 임시총회 및 추계학술발표회
• /
• pp.219-222
• /
• 2004

Removal characteristics of Mn and Co was studied from the contaminated solutions via surface reaction with various calcium carbonate (calcite). Synthetic calcium carbonates which has different surface morphology as well as surface areas were prepared by a spontaneous precipitation method and used. Mn and Co removal behavior by the different solid surface demonstrate characteristic sorption behaviors depend on the type of calcite used, such as surface area or surface morphology. Calcium carbonate crystals (mostly calcite) which exhibit complicated surface morphology (c-type) shows strong sorption affinity for Mn and Co removal via sorption than on the a-type or b-type calcite crystals of less complicated surfaces. The applicability of two kinetic models, the pseudo-first-order kinetic equation and the Elovich kinetic model was examined on these sorption behavior. Elovich kinetic model was found more suitable to explain the very early stage adsorption kinetics, while the pseudo-first-order kinetic equation was successfully fitted for the adsorption kinetics after 50 hours.

• Environmental Engineering Research
• /
• 제19권2호
• /
• pp.157-163
• /
• 2014

The adsorption of Cr(VI) from aqueous solutions to activated carbon fiber (ACF) was investigated using both batch and flow-through column experiments. The batch experiments (adsorbent dose, 10 g/L; initial Cr(VI) concentration, 5-500 mg/L) showed that the maximum adsorption capacity of Cr(VI) to ACF was determined to 20.54 mg/g. The adsorption of Cr(VI) to ACF was sensitive to solution pH, decreasing from 9.09 to 0.66 mg/g with increasing pH from 2.6 to 9.9; the adsorption capacity was the highest at the highly acidic solution pHs. Kinetic model analysis showed that the Elovich model was the most suitable for describing the kinetic data among three (pseudo-first-order, pseudo-second-order, and Elovich) models. From the nonlinear regression analysis, the Elovich model parameter values were determined to be ${\alpha}$ = 162.65 mg/g/h and ${\beta}$ = 2.10 g/mg. Equilibrium isotherm model analysis demonstrated that among three (Langmuir, Freundlich, Redlich-Peterson) models, both Freundlich and Redlich-Peterson models were suitable for describing the equilibrium data. In the model analysis, the Redlich-Peterson model fit was superimposed on the Freundlich fit. The Freundlich model parameter values were determined to be $K_F$ = 0.52 L/g and 1/n = 0.56. The flow-through column experiments showed that the adsorption capacities of ACF in the given experimental conditions (column length, 10 cm; inner diameter, 1.5 cm; flow rate, 0.5 and 1.0 mL/min; influent Cr(VI) concentration, 10 mg/L) were in the range of 2.35-4.20 mg/g. This study demonstrated that activated carbon fiber was effective for the removal of Cr(VI) from aqueous solutions.

• 청정기술
• /
• 제25권3호
• /
• pp.198-205
• /
• 2019

야자계 입상활성탄에 대한 Brilliant Green의 흡착 평형과 동역학 및 열역학 파라미터들을 다양한 초기농도($300{\sim}500mg\;L^{-1}$), 접촉시간(1 ~ 12 h) 및 흡착온도(303 ~ 323 K)를 변수로 하여 회분식 실험을 통하여 연구하였다. 흡착평형 값들은 Langmuir, Freundlich, Temkin, Harkins-Jura 및 Elovich 식으로 해석하였다. 그 결과는 Langmuir 식에 가장 잘 맞았으며, 평가된 Langmuir 무차원 분리계수 값($R_L=0.018{\sim}0.040$)과 Freundlich 상수값(1/n = 0.176 ~ 0.206)은 활성탄에 의한 Brilliant Green의 흡착이 효과적인 공정임을 보여주었다. Temkin 식에 의해 평가된 흡착열 관련상수($B=12.43{\sim}17.15J\;mol^{-1}$)는 물리흡착에 해당하였다. Harkins-Jura 식에 의한 등온선 매개변수($A_{HJ}$)는 온도가 증가할수록 이종 기공 분포도 증가함을 나타내었고, Elovich 식에 의한 최대흡착용량은 실험값보다 매우 적은 것으로 나타났다. 흡착공정은 유사이차반응속도식에 더 잘 맞았으며, 흡착과정은 입자내 확산이 율속단계였다. 입자내 확산속도 상수는 초기 농도가 커질수록 염료의 운동이 활발해졌기 때문에 증가하였다. 그리고 초기농도가 커질수록 경계층의 영향이 커졌다. Gibbs 자유에너지($-3.46{\sim}-11.35kJ\;mol^{-1}$), 엔탈피($18.63kJ\;mol^{-1}$) 및 활성화에너지($26.28kJ\;mol^{-1}$)는 흡착공정이 자발적이고, 흡열 및 물리흡착임을 나타냈다.

• 농약과학회지
• /
• 제9권3호
• /
• pp.231-236
• /
• 2005

본 연구는 생산단계의 딸기에 4가지 살균제(tolclofos-m, folpet, procymidone, triflumizole)를 수확 10일전 안전사용 기준량으로 처리한 후 잔류량을 파악하였고, 이것을 근거로 6 가지 kinetic models(first order, zero order, second order, power function model, elovich model, parabolic model)에 따른 반감기를 비교하였다. 최적의 모델로 판명된 first order kinetic model로부터 구한 반감기를 이용하여 생산단계잔류허용기준(field tolerance)을 설정, 제시하였다. 잔류분석법의 적합성 판단을 위한 회수율 실험에서는 $85.1{\sim}105.0%$ 범위를 보였으며, 4 가지 약제 모두 약제 처리 5일 후 평균 73% 이상 소실되었다. 잔류량과 시간과의 상관관계는 first order kinetic model에서 가장 높은 결정계수값을 보였으며, 이를 이용하여 산출한 반감기로 생산단계 잔류허용기준(안)을 설정하였다. 이와 같은 결과는 최적의 kinetic model로 반감기를 산출해야 한다는 이론적 근거를 제시하는 것이며, 수확 후 또는 유통 중의 잔류허용기준뿐만 아니라 생산단계에서도 허용기준을 마련하여 부적합 품목을 사전에 차단할 수 있는 기준설정의 예로서 안전 농산물 공급과 농가소득에 크게 기여할 수 있는 기초자료가 될 것이라 사료된다.

• 자원환경지질
• /
• 제42권2호
• /
• pp.95-105
• /
• 2009

합성된 레피도크로사이트(lepidocrocite)에 대한 비소의 흡착특성을 규명하기 위하여 체계적인 연구를 수행하였다. 본 연구에서 합성된 레피도크로사이트는 $94.8\;g/m^2$의 큰 비표면적을 가졌으며, 전위차 적정법(potentiometric titration)에 의해 측정된 영전하점(point of zero charge, PZC)은 6.57로 나타났는데, 레피도크로사이트의 비소에 대한 높은 제거능은 이러한 특성들에 기인한 것으로 판단된다. pH $2.0{\sim}12$ 범위에서 3가(아비산염 형태) 비소가 5가(비산염 형태) 비소보다 합성된 레피도크로사이트에 대한 흡착력이 크게 나타나서 3가 비소가 5가 비소보다 레피도크로사이트에 대한 친화력이 더 크다는 것을 알 수 있었다. 5가 비소의 흡착은 pH가 2.0에서 12까지 증가하면서 지속적으로 감소한 반면, 3가 비소는 pH가 8.0까지 증가할 때까지는 흡착도 증가하다가 그 이후의 높은 pH조건에서는 흡착이 급격히 감소하는 것으로 조사되었다. 이는 pH에 따라서 레피도크로사이트의 표면전하 특성과 두 비소 종의 존재형태가 변화하기 때문인 것으로 판단된다. 흡착 반응속도에 대한 실험 결과에 의하면, 두 비소 종 모두 4시간 이내에 빠르게 흡착이 완료되는 것으로 나타났는데, 이러한 결과는 레피도크로사이트에 의한 비소의 제거는 주로 흡착반응 이라는 것을 입증한다. 이와 더불어 본 연구결과는 power function과 elovich 모델이 레피도크로사이트에 대한 두 비소 화학종의 흡착반응속도를 모사하는데 가장 적합한 것으로 조사되었다.

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3184-3190
• /
• 2012

Color impurity in industrial effluents pose a significant risk to human health and the environment, so much effort has been expended to degrade them using various methods, including the use of clay minerals as adsorbent. The purpose of this study was to advance understanding of the mechanisms for the removal of methylene blue (MB) from aqueous solutions onto montmorillonite as an adsorbent. Preliminary experiments showed that montmorillonite was effective for this purpose and adsorption equilibrium could be reached in about 24 h. Adsorption capacity of the clay decreased with increase in temperature and ionic strength, and increased with in pH. The fitness of equilibrium data to common isotherm equations such as the Langmuir, Freundlich, Elovich, Temkin and Dubinin-Radushkevich were tested. The Langmuir equation fitted to equilibrium data better than all tested isotherm models. Thermodynamic activation parameters such as ${\Delta}G^0$, ${\Delta}S^0$ and ${\Delta}H^0$ were also calculated and results were evaluated. As result montmorillonite clay was found as effective low cost adsorbent for removal of cationic dyes from waste waters.

• Carbon letters
• /
• 제22권
• /
• pp.14-24
• /
• 2017

Carboxylated multi-wall carbon nanotubes (MWCNTs-COOH) have been used as efficient adsorbents for the removal of picric acid from aqueous solutions under stirring and ultrasound conditions. Batch experiments were conducted to study the influence of the different parameters such as pH, amount of adsorbents, contact time and concentration of picric acid on the adsorption process. The kinetic data were fitted with pseudo-first order, pseudo-second-order, Elovich and intra-particle diffusion models. The kinetic studies were well described by the pseudo-second-order kinetic model for both methods. In addition, the adsorption isotherms of picric acid from aqueous solutions on the MWCNTs were investigated using six two-parameter models (Langmuir, Freundlich, Tempkin, Halsey, Harkins-Jura, Fowler-Guggenheim), four three-parameter models (Redlich-Peterson, Khan, Radke-Prausnitz, and Toth), two four-parameter equations (Fritz-Schlunder and Baudu) and one five-parameter equation (Fritz-Schlunder). Three error analysis methods, correlation coefficient, chi-square test and average relative errors, were applied to determine the best fit isotherm. The error analysis showed that the models with more than two parameters better described the picric acid sorption data compared to the two-parameter models. In particular, the Baudu equation provided the best model for the picric acid sorption data for both methods.

• Advances in environmental research
• /
• 제6권4호
• /
• pp.281-299
• /
• 2017

Single (0.005 M DTPA), sequential (six-step) and kinetic (0.05 M EDTA) extractions were performed to assess Cd, Cr, Cu, Ni, Pb, and Zn mobilization and their potential ecological risks in Abuja (Nigeria) water (WTS) and wastewater (WWTS) treatment sludges. Total metal levels (mg/kg) in WTS and WWTS, respectively were: Cd(3.67 and 5.03), Cr(5.70 and 9.03), Cu(183.59 and 231.53), Ni(1.33 and 3.23), Pb(13.43 and 17.87), Zn(243.45 and 421.29). DTPA furnished metal extraction yields (%) in WTS and WWTS, respectively as: Cd(11 and 6), Cr (15 and 7), Cu(17 and 13), Ni(23 and 3), Pb(11 and 12), and Zn(37 and 33). The metals were associated with the soluble/exchangeable, carbonate, Mn/Fe-oxide, organic matter and residual forms to varying degrees. Kinetic extractions cumulatively leached metal concentrations akin to the mobilizable fractions extracted sequentially and the leaching data fitted well into the Elovich model. Metal mobilities were concordant for the three leaching procedures and varied in the order:WTS>WWTS. Calculated ecological risk indices suggested moderate and considerable metal toxicity in WTS and WWTS, respectively with Cd as the worst culprit. The findings may be useful in predicting heavy metals bioavailability and risks in the sludges to guide their disposal and use in land applications.

• Carbon letters
• /
• 제13권4호
• /
• pp.212-220
• /
• 2012

Orange peel (OP) exhibits a sorption capacity towards anionic dyes such as reactive blue 19 (RB19). Cetyltrimethylammonium bromide (CTAB) as a cationic surfactant was used to modify the surface nature of OP to enhance its adsorption capacity for anionic dyes from an aqueous solution. Four adsorbents were investigated: the OP, sodium hydroxide-treated OP (SOP), CTAB-modified OP and CTAB-modified SOP. The physical and chemical properties of these sorbents were determined using nitrogen adsorption at 77 K and by scanning electron microscope and Fourier transform infrared spectroscopy techniques. The adsorption of the RB19 dye was assessed with these sorbents at different solution pH levels and temperatures. The effect of the contact time was considered to determine the order and rate constants of the adsorption process. The adsorption data were analyzed considering the Freundlich, Langmuir, Elovich and Tempkin models. The adsorption of RB19 by the assessed sorbents is of the chemisorption type following pseudo-first-order kinetics. CTAB modification brought about a significant increase in RB19 adsorption, which was ascribed to the grafting of the sorbent with a cationic surfactant.

• 상하수도학회지
• /
• 제34권3호
• /
• pp.201-210
• /
• 2020

2 (Langmuir, Freundlich, Elovich, Temkin, and Dubinin-Radushkevich) and 3 (Sips and Redlich-Peterson)-parameter isotherm models were applied to evaluated for the applicability of adsorption of Cu(II) and/or phosphate isotherm using chitosan bead. Non-linear and linear isotherm adsorption were also compared on each parameter with coefficient of determination (R²). Among 2-parameter isotherms, non-linear Langmuir and Freundlich isotherm showed relatively higher R² and appropriate maximum uptake (q_m) than other isotherm equation although linear Dubinin-Radushkevich obtained highest R². 3-parameter isotherm model demonstrated more reasonable and accuracy results than 2-parmeter isotherm in both non-linear and linear due to the addition of one parameter. The linearization for all of isotherm equation did not increase the applicability of adsorption models when error experiment data was included.