• The Korean Journal of Cytopathology
• /
• v.8 no.1
• /
• pp.47-51
• /
• 1997

Patients with rheumatoid arthritis of any degree of severity or duration may develop necrotizing granulomatous pleuritis, a morphologic replica of the inflammatory reaction characteristic of rheumatoid synovitis and rheumatoid nodules. The principal feature is the background composed of granular, amorphous, particulate material or debris of various hues. The material is sometimes eosinophilic sometimes more cyanophilic, or even green in the Papanicolaou stain. Within this background are elongated, fibroblast-like epithelioid cells, numerous multinucleated giant cells and degenerating leukocytes. The combination of the debris, spindle epithelioid ceils, and multinucleated giant cells in fluid is pathognomonic for rheumatoid pleuritis. We experienced a hcase of rheumatoid pleuritis showing these characteristic cytologic findings. The patient was a 63 year-old man with positive rheumatoid factor. The pleual fluid specimen revealed elongated epithelioid cells and multinucleated giant cells on a background of amorphous granular material.

• Parasites, Hosts and Diseases
• /
• v.58 no.3
• /
• pp.279-285
• /
• 2020

We intended to describe 2 digenean trematodes found from a Chinese sea snake, Laticauda semifasciata, as the new fauna in the Republic of Korea. The snake was caught offshore of Aewol-eup, Jeju-do, in August 2017. Two species of fluke were found in the lung and intestinal tract of the snake in the process of necropsy. They were identified as Pulmovermis cyanovitellosus Coil and Kuntz, 1960 and Harmotrema laticaudae Yamaguti, 1933, respectively based on the morphological characters. Pulmovermis cyanovitellosus showed elongated body with well-developed and elongated male genital system and compact vitelline. And H. laticaudae was characterized by linguiform body with heavily armed cirrus with excretory system. This is the first time both species have been reported and described off the Korean coast. We provide morphological descriptions with some comments on their biology and geographical distribution. In addition, the taxonomic validity of the genus Hydrophitrema Sandars, 1960 was discussed, in terms of morphological descriptions and host ranges. This study provides novel insight into digenean fluke species existing off the coast of Korea.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.5
• /
• pp.293-298
• /
• 2006

Optimum culture conditions for high frequency plant regeneration from leaf explants of Kalanchoe daigremontiana Hamet &Perrier were established. Shoot regeneration was achieved from leaf explant cultures using MS medium supplemented with indole-3-acetic acid (IAA) and thidiazuron (TDZ) or benzyladenine (BA). Percent regeneration was influenced by plant growth regulators and source of explants. MS medium supplemented with TDZ (1.0 mg/l) and IAA (0.4 mg/l) was the most effective, providing shoot regeneration for 76.7 % of ex vitro leaf explants associated with a high number of shoots per explant (9.5 mean shoots per explant), whereas 100% shoot regeneration associated with 12.4 shoots per explant occurred from in vitro leaf explants on the same medium. Clusters of shoots were multiplied and elongated on MS medium containing several concentrations of BA. MS medium supplemented with 0.25 mg/l BA was proved as the most effective shoot elongation medium. Elongated shoots (2-3 cm) were rooted at 100% on half-strength MS medium. Rooted plantlets were then transferred to potting soil. Regenerated plants were established in the soil with 90% success.

• Journal of Powder Materials
• /
• v.10 no.2
• /
• pp.118-122
• /
• 2003

Alpha-SiAlON ceramics having various compositions and modifying cations were investigated with respect to their phase stability, transformation kinetics. and resulting microstructures. Each composition was heat treated at 150$0^{\circ}C$ for 1h and measured the $\alpha$-SiAlON transformation. The phase-boundary composition in the single-phase $\alpha$-SiAlON region showed sluggish transformation from $\alpha$-$Si_3N_4$ to $\alpha$-SiAlON compared to the phase-center composition in the diagram. Using the different rare earth modifying cations, dependence of transformation kinetics on the phase stability in a fixed composition was also explained. By changing size of the stable u-phase region with exchanging cations, systematic change in transformation was observed. Transformation rate of $\alpha$-SiAlON at low temperature has an important role on controlling the final microstructure. Less transformation gives more chances to develop elongated grain in the microstructure.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.1
• /
• pp.55-59
• /
• 2000

In this study, materials for spectacle lens cutting were fabricated by hot-pressing and annealing SiC powders with $Al_2O_3$ and $Y_2O_3$. A microstructure that consisted of uniformly distributed, large SiC grains and elongated SiC grains was developed by using ${\alpha}$-SiC powders. The microstructure was observed by scanning electron microscope(SEM). By hot-pressing and subsequent annealing, elongated ${\beta}$-SiC grains were grown via ${\beta}{\rightarrow}{\alpha}$ phase. This is caused the crack deflection as toughening mechanism. Typical hardness and fracture toughness of materials for spectacle lens cutting were 13.3 GPa and $4.8MPa{\cdot}m^{1/2}$, respectively.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.1
• /
• pp.8-12
• /
• 2000

The properties variation by deterioration of the 600V grade heat-resistant polyvinyl chloride insulated wire(HIV) was analyzed. The weight variation of the thermal deteriorated HIV was about 42% at 80$0^{\circ}C$ and over. From the analysis result of the metallurgical microscope photographs it shows that the sorface of normal wire showed the elongated structures. However the elongated structures did not appear at $900^{\circ} and over and we could observe that particles were grown. The grown oxidized substances in the thermally deteriorated electric wire were observed by SEM. The CuL, CuK, $CuK_b$, OK and CIK spectra of the thermally deteriorated HIV at $300^{\circ}C$ were uniform regardless of the scanning length, but the spectra of CIK could not found at above $700^{\circ}. At the DTA analysis, the endothermic reactions were occurred around $3006{\circ}C\; and\; 400^{\circ}C$ and the exothermic reactions were occurred around $470^{\circ}, respectively.

• Korean Journal of Materials Research
• /
• v.10 no.1
• /
• pp.83-89
• /
• 2000

$Si_3N_4$ powder with 2wt% $Al_2O_3$ and 6wt% $Y_2O_3$ additives was sintered by gas pressure sintering (GPS) technique. The variations in the unlubricated wear behavior depending on sintering time were compared. Tribological properties depending on sintering time are associated with fracture toughness as well as flexural strength of materials. When increasing the sintering time, the larger elongated grains were formed as a result of exaggerated grain growth. As the fracture toughness and flexural strength decreased, the wear volume increased. On the basis of these experimental results, the unlubricated wear properties of silicon nitride were found to be governed mostly by both the fracture toughness and the flexural strength of the material.

• The Journal of the Korean dental association
• /
• v.22 no.11 s.186
• /
• pp.961-971
• /
• 1984

The purpose of this study was designed to evaluate the existence of the junctional epithelia on the tooth surface in periodontal pocket, and what were the morphologic differences between the junctional epithelia on the healthy and advanced periodontitis tooth. Fifteen premolar teeth from patients of Yon Sei University, Dental Infirmary were selected for this study. After extration, the teeth were prepared and examined in Scanning electro microscope. The results were as follows. 1. The junctional epithelia from healthy tooth surface were irreguraly round, oval, polygonal and slightly elongated while those from periodontal pocket were so elongated that difficult to distinguished the individual cell boundary. 2. There were a lot of round space so called 'HOLE or WHORL' which seemed tunnel in periodontal pocket with advanced periodontitis. 3. Microvilli were going to destructed and disappeared on surfaces of junctional epithelia in periodontal pocket with advanced periodontitis. 4. There were a lot of Filopodia on Junctional epithelia from healthy surfaces. %. Junctional epithelia from periodontal pocket with advanced periodontitis contained more inflammatory cells than healthy junctional epithelia did.

• KSBB Journal
• /
• v.29 no.4
• /
• pp.278-284
• /
• 2014

We present microfluidic method to rapidly analyze the effect of temperature on the change of morphologies of Antarctic bacteria (Pseudoalteromonas sp., Shewanella vesiculosa, Shewanella sp., and Cellulophaga sp.). The microfluidic device is able to generate stable temperature gradient from 7 to$40^{\circ}C$ and dramatically reduce the number of experiments, experimental cost and labor, and amount of sample. Based on this approach, we found that specific bacteria transforming morphology into filament or elongated body strongly depends on cultivation temperature. Interestingly, we found that the morphologies of Pseudoalteromonas sp., Shewanella vesiculosa, Shewanella sp., and Cellulophaga sp. are elongated at below $25^{\circ}C$, above $20^{\circ}C$, above $15^{\circ}C$ and above $35^{\circ}C$, respectively. We envision the microfluidic device is a useful approach to analyze biological events with a high throughput manner.

• Transactions of Materials Processing
• /
• v.26 no.3
• /
• pp.156-161
• /
• 2017

In this study, the reason of die fracture occurring in hot forging of an aluminum fixed scroll was studied, based on experiments and finite element predictions. The material is assumed to be rigid-viscoplastic, and the die is rigid for the finite element predictions. The stress in the tension at the wrap root is known to cause brittle fracture, and the increase in the tensile stress is owing to the unbalanced filling of material into the die cavities between both sides of the warp. Based on the empirical and numerical achievements, the effects of geometrical parameters of the material on the die fracture were examined to find practical measures for elongated die life. It has been shown from the parametric study that the material with the optimized trapezoidal cross-section, which can be easily made during cutting or the optimized cylindrical billet with its eccentric placement in the die cavity, can considerably reduce the magnitude of the tensile stress around the die corner fractured, indicating that economical manufacturing with reduced number of stages and elongated die life can be realized at once using the optimized practical initial material.