• Journal of Biosystems Engineering
• /
• v.28 no.2
• /
• pp.151-156
• /
• 2003

This study was performed to investigate the effect of light quality on evapotranspiration and graft-taking characteristics of watermelon grafted seedlings using blue, red and far-red light-emitting diodes (LED). At initial stage of graft-taking, blue light increased the evapotranspiration rate (EVTR) of grafted seedlings as compared to effects of red and far-red on EVTR of grafted seedlings. Grafted seedlings graft-taken under red and blue LED showed the high graft-taking of 100% and 96%, respectively. However, grafted seedlings graft-taken under far-red LED showed the graft-taking of 80% and survival of 60% with low seedlings quality after hardening. The stem of grafted seedlings graft-taken under red light was elongated but blue light suppressed the stem elongation. The leaf area of grafted seedlings graft-taken under red light was increased. It is concluded that the effect of light quality using LED on graft-taking of watermelon grafted seedlings was significantly recognized. Considering the duration of quality of grafted seedlings graft-taken under artificial lighting, LED could be used as an effective lighting sources to validate the continuance of seedling quality.

• Ocean and Polar Research
• /
• v.26 no.4
• /
• pp.685-688
• /
• 2004

The morphology of the post-larva of Liopropoma japonicum of the family serranidae is described from one specimen collected off Jeju Island ($32^{\circ}42'N,\;127^{\circ}45'E$) on May 3, 2001. The body is laterally compressed and caudal peduncle deep at 19.4 mm BL. Anus locates at a vertical through posteriormost(8th) dorsal-fin spine. Dorsal fin rays were VIII, 14; anal fin rays III, 10; pectroal fin rays 16; pelvic fin rays I, 5. A caudal fin is rounded. Length of elongate second and third dorsal-fin spines are 499% and 423% of the body length, respectively. A series of 50 sensory pores on body is elongated to caudal fin. Head spination is well developed. Melanophores are moderately large and dense in the head, and are small and rare in teh neck. Being freshly collected, the body color is yellowish-red and tail is semitransparent. The head is yellowish-red and the brain is dark-red.

• Earthquakes and Structures
• /
• v.2 no.3
• /
• pp.257-277
• /
• 2011

An evaluation is presented of the response of a 3-storey R/C structure during the destructive Lefkada earthquake of 14/08/2003. Key aspects of the event include: (1) the unusually strong levels of ground motion (PGA = 0.48 g, $SA_{max}$ = 2.2 g) recorded approximately 10 km from fault, in downtown Lefkada; (2) the surprisingly low structural damage in the area; (3) the very soft soil conditions ($V_{s,max}$ = 150 m/s). Structural, geotechnical and seismological aspects of the earthquake are discussed. The study focuses on a 3-storey building, an elongated structure of rectangular plan supported on strip footings, that suffered severe column damage in the longitudinal direction, yet minor damage in the transverse one. Detailed spectral and time-history analyses highlight the interplay of soil, foundation and superstructure in modifying seismic demand in the two orthogonal directions of the building. It is shown that soil-structure interaction may affect inelastic seismic response and alter the dynamic behavior even for relatively flexible systems such as the structure at hand.

• Journal of Powder Materials
• /
• v.16 no.3
• /
• pp.209-216
• /
• 2009

A composite of rapidly solidified Al-6061 alloy powder with graphite particle reinforcements was prepared by ball milling and subsequent hot extrusion. The microstructure and mechanical properties of these composites were investigated as a function of milling time. With increasing milling time, the gas atomized initially and spherical powders became elongated with a maximum aspect ratio after milling for 30 h. Then, refinement and spheroidization were achieved by further milling to 70 h with a homogeneous and fine dispersion of graphite particles forming between the matrix alloy layers. The best compression and wear properties were obtained in the powder milled for 70 h, associated with the increased fine and homogeneous distribution of graphite particles in the aluminum alloy matrix.

• Journal of Korea Multimedia Society
• /
• v.7 no.4
• /
• pp.459-466
• /
• 2004

In this paper, an effective skeleton method is proposed in order to obtain an enhanced digital image of skeleton line. The binary image using the threshold values is applied in the preprocessing stage and then the modified parallel processing method is applied to obtain the improved image of skeleton line. The existing skeleton methods are Rutovitz, Steiabelli and other five skeleton methods. In the digital process of skeleton line, the major problem caused by these methods is elongated lines and noise branches of the processed image. In this study, however, such noises are deleted first by the modified parallel processing step of the proposed method. Then a pixel is compared to its eight neighbor pixels. if its neighbor pixels are in one of the eight conditions, the central pixel is deleted. As a result, the quality of the skeleton is better then those produced by the existing skeleton methods.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.1
• /
• pp.61-65
• /
• 2000

${\beta}$-SiC powder and ${\alpha}$-SiC powders of different particle sizes, containing 5.7wt% $Al_2O_3$ and 4.3wt% $Y_2O_3$ as sintering aids, were hot-pressed at $1780^{\circ}C$ and subsequently annealed at $1950^{\circ}C$ to initiate grain growth. All the hot-pressed and annealed materials consisted of large SiC grains and elongated SiC grains. Typical hardness and fracture toughness of materials for spectacle lens cutting were 15.6 GPa and $5.7MPa{\cdot}m^{1/2}$, respectively.

• Ocean and Polar Research
• /
• v.26 no.2
• /
• pp.207-218
• /
• 2004

Lomilik Seamount in the west Pacific was seismically surveyed and photographed to illuminate the bottom topography, the condition of manganese crust, and the characteristics of sedimentary environment. Lomilik Seamount has a NW-SE elongated bottom topography with steep slopes in the NESW direction part. Even though the steep slopes of the seamount are devoid of deposits, the summit area and gentle slope of the seamount are covered with thick deposits. The seismic data indicate that Lomilik Seamount is a flat-topped and step-faulted guyot of volcanic origin. Deep-sea camera photographs show that much of the seafloor is rippled in symmetrical and asymmetrical patterns. The traces of biological activity were distinct on gentle seafloor suggesting the low-energy bottom conditions. Some photographs also show outcrops encrusted with manganese crusts. Sedimentary environments in the Lomilik Seamount appear have been governed by regional morphology and strong bottom current.

• Journal of Korean Neurosurgical Society
• /
• v.42 no.1
• /
• pp.42-45
• /
• 2007

Spinal cord lipomas are commonly associated with spinal dysraphism. The lipomas without spinal dysraphism have been reported to be only 1% of all spinal cord lipomas. We report two cases of patients with spinal intramedullary lipomas without dysraphism. One patient was a 57-year-old man who had lower back pain and right-sided sciatica for 20 years. Magnetic resonance imaging (MRI) of the spine demonstrated an intradural mass occupying L1 to L2. The other patient was a 27-year-old woman who had back pain and gait disturbance for 5 months. MRI of the spine showed an elongated intradural mass occupying T7 to T9. Total laminectomy with partial resection of the lesions was performed on both patients. Pathological studies confirmed the diagnosis of spinal cord lipoma. They exhibited no dysraphism. Postoperatively, neurological symptoms improved in both patients.

• Journal of Korean Society for Atmospheric Environment
• /
• v.29 no.1
• /
• pp.27-37
• /
• 2013

CFCs (Chlorofluorocarbons) and HCFCs (Hydrochlorofluorocarbons) that are chemically stable were proven to be a greenhouse gases that can destroy ozone layer. On the other hand, HFCs (Hydrofluorocarbons) was developed as an alternative refrigerant for them, but HFCs still have a relatively higher radiative forcing, resulting in a large Global Warming Potential (GWP) of 1,300. Current regulations prohibit production and use of these chemicals. In addition, obligatory removal of existing material is in progress. Methods for the decomposition of these material can be listed as thermal cracking, catalytic decomposition and plasma process. This study reports the development of low cost and high efficiency plasma scrubber. Stability of steam plasma generation and effect of plasma parameters such as frequency of power supply and reactor geometry have been investigated in the course of the development. Method for effective removal of by-product also has been investigated. In this study, elongated rotating arc was proven to be efficient in decomposition of HFCs above 99% and to be able to generate stable steam plasma with steam contents of about 20%.

• Elastomers and Composites
• /
• v.35 no.4
• /
• pp.303-310
• /
• 2000

Low temperature retraction characteristics were investigated on the cured natural rubber with various ratios of crosslinking agents, filler and additives. The cured natural rubber product was elongated about 200% at $-40^{\circ}C$ for 24 hours and then retracted. In a definite range, the retraction was increased as the sulfur to accelerator ratio increased and as the filler contents decreased. The retraction was maximum for a definite range of amount of accelerators, plasticizer and activator. Adding some peroxide additively retraction characteristics improved and curing time got longer.