• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.4
• /
• pp.148-153
• /
• 2008

Although manual traction, one of pain therapies, was applied in clinic to relief pain, the study was rare on the manual force and displacement of ligaments at knee joint during manual traction. The aim of this study is to quantify not only manual force at knee joint but also elongated displacement of joint ligament by C-arm scanning and motion analysis. Twenty-one healthy subjects were tested with manual traction from grade I to grade III under neutral position by a physical therapist. We calculated traction force using joint farces of both hands and elongated displacement of joint ligament were measured. The results showed that traction forces by C-arm scanning analysis were averagely 1.67-fold greater than those by motion analysis, but elongated displacements were instead averagely 2.36-fold smaller than motion analysis. Finally, we could estimate relationship between traction force and elongated displacement at knee joint by two methods.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.2
• /
• pp.49-57
• /
• 2004

Generally, the properties of aggregate greatly affect the physical and mechanical properties of concrete. Flat and elongated particles in coarse aggregates, for some construction uses, may interfere with consolidation and be difficult to place. In this study, an experiment to evaluate properties of flat and elongated particles as coarse aggregate in concrete was conducted. The experiments include slump test, air content test and compressive strength test. The test result of slump and change of slump was rapidly decreased by percentage of flat and elongated particles. But it had not a trend by increasing percentage of flat and elongated particles. Compressive strength of hardened concrete does not make any differences in comparison.

• Korean Journal of Bronchoesophagology
• /
• v.2 no.2
• /
• pp.258-263
• /
• 1996

The styloid process is a slender, cylindrical bony outgrowth located immediately in front of the stylomastoid foramen and fused to the inferior aspect of the temporal bone. The elongated styloid process is not so frequent and the styloid syndrome is a dull, nagging pain in the oropharynx, often referred to the ear and the mastoid region. The symptoms are secondary stimulation of the nerves and vessels which pass close to the tip of the process. The clinical diagnosis is certain if the elongated styloid process is palpated through the tonsillar area. Radiologic investigation give information about the length of the styloid process and medial angulation. The treatment of choice is surgical shortening of the process. Recently, the authors experienced a case of elongated styloid syndrome misdiagnosed as pharyngeal neurosis in a 28 year-old male patient.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.16 no.3
• /
• pp.348-355
• /
• 1994

Styloid process is a slender pointed bone of variable length, which project downward, forward, and slightly medialward from the posteroinferior portion of the tympanic part of the temporal bone. Embryologically, the styloid process is derived from Reichert's cartilage, a structure of second branchial arch origin. Most patients with elongated styloid process remain asymptomatic, but some patients complain pain and sensation of foreign body in the throat, dysphagia, dysphonia, referred otalgia. Recently, we have experienced a case of elongated styloid process in a fifty-nine year old man. He had been suffered from Rt. side sore throat, headache and pharyngeal discomfort during head movement. Through various X-ray examination, Xeroradiography, and palpation of tonsillar fossa, elongated styloid process on Rt. side was confirmed. Under the general anesthesia, it was successfully removed out via transoral approach technique, described by Eagle. The resected styloid process was 2.5cm in it's length and he was freed from the symptoms without further complication.

• Journal of the Korean Ceramic Society
• /
• v.39 no.3
• /
• pp.217-221
• /
• 2002

Si and ${\alpha}-Si_3N_4$ powder mixtures added with 3 wt% $Y_2O_3$ were reacted under 5 MPa nitrogen pressure. The reaction products contained ${\alpha}-Si_3N_4$ particles with elongated shapes. Length and width of the elongated grains were the maximum when the starting powder mixture of 50 wt% Si - 47 wt% ${\alpha}-Si_3N_4$ and 3 wt% $Y_2O_3$ was used. Aspect ratio of the elongated grains were between 4.4 and 5. When the starting powder mixture contained 70 wt% Si, large particles with irregular shapes appeared. Meanwhile, the reaction did not proceed when the starting powder mixture contained 30 wt% Si and less. The SHS product was easy to crush and the elongated particles obtained from the starting powder mixtures of 40 wt% Si - 57 wt% ${\alpha}-Si_3N_4$ - 3 wt% $Y_2O_3$ and 50 wt% Si - 47 wt% ${\alpha}-Si_3N_4$ - 3 wt% $Y_2O_3$ were good candidates for the seeds.

• Journal of Powder Materials
• /
• v.15 no.3
• /
• pp.210-213
• /
• 2008

Elongated CdSe nanoparticles with a diameter of 3-7nm have been successfully synthesized using two surfactants of trioctylphospine (TOP) and hexadecylamine (HDA) at $160^{\circ}C$. The formation of elongated CdSe nanoparticles is possibly due to the cooperative effects from both the different binding capability of two surfactants (TOP and HDA) and intrinsically anisotropic crystal structure of the CdSe. The electron diffraction pattern of CdSe nanoparticles revealed the formation of wurzite phase. The CdSe samples showed red-shifted wavelength from 560 to 580nm with increasing the refluxing time due to the gradual growth of CdSe nanoparticles. The relatively broad absorption band can be attributed to the surface state of CdSe nanoparticles. The possible formation mechanism of elongated CdSe nanoparticles was proposed and the characteristics of CdSe have been discussed as well.

• The Korean Journal of Pain
• /
• v.8 no.2
• /
• pp.319-323
• /
• 1995

The implication of cervical pain associated with an elongated styloid process is credited to W.W.Eagle. Even though there were earlier reports of ossification of the stylohyoid ligament, findings in more than 200 cases in 1980s and 1940s resulted in the naming of a clinical syndrome that continues to bear his name, Eagle's syndrome. It is also sometimes called styloid process neuralgia or elongated styloid process syndrome is more common than generally recognized. The clinical symptoms range from a dull nagging pain with occasional radiation to ear, or to a foreign body sensation. Dysphagia and odynophagia may also occur. We successfully treated one case by removal of the elongated styloid process under the general anesthesia and C2 ganglion block. We then reported the clinical feature of one case of the Eagle's syndrome and further researched with the foreign literature.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.10 no.5
• /
• pp.367-372
• /
• 2000

The film-type specimen of poly ethylene terephthalate (PET) was stepwise elongated under tension with various speed range of about 0.5~500 mm/min, and then the necking behavior during its plastic deformation was observed. When elongated at the speed range of about 20~100 mm/min, stress oscillation was apparently occurred in the stress-strain curve. When elongated at the speed range of about 200~500 mm/min, stress oscillation was not did. The transparent/opaque zone and cross-section area in the specimen elongated at the speed of about 50 mm/min were examined using the optical microscopy and scanning electron microscopy. The corrosion characteristic of the specimen elongated at the speed of about 50 mm/min in 3.8 M NaOH alkali solution was examined using the optical microscopy.

• Proceedings of the ESK Conference
• /
• 1996.04a
• /
• pp.186-190
• /
• 1996

This study investigated the effect of character form on Readability of Hangul characters and words in horizonatal printing. The results were as follows. In canceling tests, (1) the speeds of charcter canceling were faster in the order of elongated from, condensed form and original form conditions, and (2) the speeds of word canceling were in the order of elongated, original and condensed form conditions. But in a reading task, The above indicates that Elongated from the best combination for horzontal Hangul printing.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.389-396
• /
• 2016

In order to maximize the speed of Theo Jansen Mechanism in an given design space and prototyping material, the trajectory path was maximized according to several literature reviews, and the lower leg was elongated maximally in order to minimize the shift between support phase and transfer phase.