• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅳ
• /
• pp.2104-2107
• /
• 2003

In this paper, we propose the method Model based Non-Rigid Moving Object Tracking. Motion based method becomes difficult to predict precisely when motion gets larger, so that we can solve such difficultly with regarding the moving object as a model. In the model based method, it should be concerned about setting initial model and updating its model in each frame. We used SNAKE in a way to set the initial model, and also proposed a modified SNAKE to handle the previous SNAKE problems. Moreover, with the elliptical setting, we made the initializing process automatically which is highly subject to change in measuring the performance of SNAKE. We used the Hausdorff distance to identify models in each frame. Through our experiments, our Proposed algorithm does effective work in Non-Rigid Moving Object Tracking.

• Journal of Astronomy and Space Sciences
• /
• 제36권1호
• /
• pp.11-20
• /
• 2019

Being a torque free motion of the rotating Earth, Chandler wobble is the major component in the Earth's polar motion with amplitude about 0.05-0.2 arcsec and period about 430-435 days. Free core nutation, also called nearly diurnal free wobble, exists due to the elliptical core-mantle boundary in the Earth and takes almost the whole part of un-modelled variation of the Earth's pole in the celestial sphere beside precession and nutation. We hereby present a brief summary of their theories and report their recent features acquired from updated datasets (EOP C04 and ECMWF) by using Fourier transform, modelling, and wavelet analysis. Our new findings include (1) period-instability of free core nutation between 420 and 450 days as well as its large amplitude-variation, (2) re-determined Chandler period and its quality factor, (3) fast decrease in Chandler amplitude after 2010.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권9호
• /
• pp.427-433
• /
• 2001

A linear ultrasonic motor was designed by a combination of the first longitudinal and fourth bending mode, and the motor consisted of a straight aluminum alloys bar bonded with a piezoelectric ceramic element as a driving element. That is,$L_1-B_4$ linear ultrasonic motor can be constructed by a multi-mode vibrator of longitudinal and bending modes. Linear ultrasonic motors are based on an elliptical motion on the surface elastic body, such as bar or plates. In general, the natural resonance frequency of the stator is used as a driving frequency of the motor which provides a large elliptical motion. The corresponding eigenmode of one resonance frequency can be excited twice at the same time with a Phase shift of 90 degrees in space and time. And the rotation can be reversed by changing the phase between the two signals from sin$\omega$t to cos$\omega$t. Moreover, the tangential force pushes the slider(rotor) and, therefore, determines the thrust and speed of the motor. The experimental results of fabrication motors, bimorph-tyPe motor showed more excellent than unimorph-type. The maximum speed of TBL-200, TBL-300, TBL-400, TBL -220, TBL-310 and TBL-420 motors were 0.12, 0.37, 0.39, 0.14, 0.55 and $0.60ms6{-1}$, respectively. And the efficiency were reported 1.15, 7.9, 6.6, 2.36, 10.1 and 16.5%, respectively. That time, output thrust of the motor was a strong(1~2N) and the weight of stator was a lightness(5~7g).

• 한국실천공학교육학회논문지
• /
• 제2권2호
• /
• pp.42-48
• /
• 2010

이 연구에서는 PBL교육방법 및 교수법의 기초공학에 적용 예제로써 그 핵심 요구사항들인 높은 전공지식(the learner acquisition of critical knowledge), 고도의 문제해결 능력(problem solving proficiency), 학습자 중심의 학습전략 (self-directed learning strategies), 및 집단참여 기술(team participation skills)을 구현하기 위해 ET 헬스기구를 활용하여 물성과 생체 사이의 물리변수의 단위 통일, 실험 데이터의 오차범위 계산, 시스템이 물성과 생체를 포함하는 에너지보존법칙과 운동방정식 유도, 및 데이터의 패턴 해석 능력을 기르도록 하였다. 이 연구에서는 ET 기구가 PBL 교육방법과 교수법을 채택하는 좋은 예제가 될 수 있음을 보여준다. 수업계획은 한 학기용으로 준비되었으며 학습자가 주도적으로 그리고 창의적으로 실험수행을 하고 그 결과를 분석을 하도록 주어진 세 가지 PBL 프로젝트에 대해 얻어진 최종결과는 (1) 집단 A의 문제에 대해 얻어진 운동속도(km/s) 대 에너지 소비량(Cal) 도표의 기울기는 23.5o였으며, (2) 집단 B의 문제에 대해 얻어진 체중감량(kg) 대 에너지 소비량(Cal)의 도표의 각도범위는 15.0o ~ 26.5o 이었고, 마지막으로, (3) 집단 C의 문제에 대해서 운동 거리(km) 대 체중감량(kg) 도표의 각도변화는 51.0o 이였다.

• 한국정밀공학회지
• /
• 제31권5호
• /
• pp.381-387
• /
• 2014

This paper introduces a system to machine micro-sized patterns effectively on surface based on micro-milling process using tools with simultaneous rotation and oscillation, oscillation micro milling. To review the effectiveness of proposed concept, we integrated a micro-spindle supported by active magnetic bearings with a precision 3-axis air bearing stage using double-wedge mechanism, and tested this oscillation milling. Two types of oscillation milling were tested, which are linear oscillation milling with a flat end mill and elliptical oscillation milling with a ball end mill with 0.3 mm of diameter. The spindle was rotating 110 krpm and workpiece was moving constant speed of 2~8 mm/sec during the oscillation milling. As the results, multiple oval shape dimples were generated in regular spacing, and the variation of elliptical motion made different shapes of patterns. The results showed that proposed oscillation milling can be successfully used for machining repeated micro-patterns.

• 센서학회지
• /
• 제18권3호
• /
• pp.185-189
• /
• 2009

In this paper, we present design and analysis of the omni-directional linear piezoelectric actuator which was consisted of one actuator using the half-wave vibrator. Through calculating vibration speeds on each sector of the actuator, the displacement of contact point of the actuator is theoretically confirmed to be about 33 nm. To confirm an applicable possibility of omni-directional linear piezoelectric actuator, elliptical motion for linear movement, displacement of the tip, changing directions and admittance characteristics are simulated by ATILA. Compared with theoretical result, we obtained similar data with displacement of 32.5 nm at contact point. And then the actuator is simulated elliptical trajectories for linear motions and changing directions according to combination of input signal.

• 한국정밀공학회지
• /
• 제16권3호통권96호
• /
• pp.72-77
• /
• 1999

This paper presents 2-dimensional vibration cutting increases dynamic stiffness of tool support and improves the quality of machined surface in micro-machining. 2-dimensional vibration cutting is generated by two piezo actuators arranged orthogonally. A sine-type voltage is input to one actuator and a phase-shifted sine-type voltage is input the other. Then the vibration device actuates the tool in a 2-D elliptical motion with pulsed cutting force. It is a characteristic of 2-D vibration cutting that some negative thrust force occurs as the direction of friction on a tool rake surface is reversed. It helps not only chip flow smoothly and continuously but also cutting force be reduced. The quality of machined surface by 2-D vibration cutting depends on such parameters as vibration amplitude, frequency, cutting speed, depth of cut, etc. Compared to conventional cutting through tool path simulation and experiments under several conditions, the 2-D vibration cutting is verified to bring forth a great decrease of cutting forces, much better surface roughness and moreover much less burr.

• 한국기계가공학회지
• /
• 제17권5호
• /
• pp.37-44
• /
• 2018

In laser material processing for high thermal conductivity, the thermal effect of laser beam shape was examined through computer simulations. In this paper, a circular beam with a focal radius of $500{\mu}m$, an elliptical beam with a major axis of 4 mm and a minor axis of 1 mm, and a rotating beam with a focal radius of $500{\mu}m$ and an angular velocity of 5 rad/sec were compared. Simulation results showed that there was no clear difference in the maximum temperature between the circular focus and the elliptical shape, but the heating and cooling rates were different. The simulation result for a laser beam rotating in a circular pattern with a radius of 5 mm showed an asymmetric temperature rise due to the combination of linear and rotational motion. At points where the rotational and linear speeds combined, the temperature gradually rose and reached the maximum temperature; whereas at points where the rotational and linear speeds were attenuated, the temperature tended to gradually decrease after reaching the maximum temperature. Based on the results of this study, the authors expect to be able to optimize laser material processing by designing patterns of laser beams.

• 한국항공우주학회지
• /
• 제46권11호
• /
• pp.902-910
• /
• 2018

본 논문은 지구의 J2 섭동을 고려한 비공면 타원궤도에서의 우주비행체의 요격 문제를 다룬다. J2에 의한 영향은 지구를 돌고 있는 우주비행체 궤도를 변화시키는 주된 요인이 되며, 이를 해결하기 위해 실시간 요격 방법을 제안한다. 구형의 지구와 순간추력을 고려한 운동방정식을 기반으로 최적화 문제를 구성하고 수치적으로 얻어진 최적해를 인터셉터의 추진방향으로 설정한다. 위치 오차는 최적화 문제를 반복적으로 해결하고 인터셉터의 추진방향을 수정하는 방식으로 해결한다. 다양한 궤도를 상황을 고려하여 제안하는 방법을 검증한다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권2호
• /
• pp.201-211
• /
• 2018

This paper illustrates recent advancements relative to a non-conventional propulsion system for boats and is based on two previous papers of the author presented at a conference (see Muscia, 2015a,b). The system does not consider propellers and utilizes the vibration generated by two or more pairs of counter rotating masses. The resultant of the centrifugal forces applies an alternate thrust to the hull that oscillates forward and backward along the longitudinal axis of the boat. The different hydrodynamic drag forces that oppose to the oscillation produce a prevalently forward motion of the vessel. The vibration that causes the motion can be suitably defined to maximize the forward displacement and the efficiency propulsion of the system. This result is obtained by using elliptical gears to rotate the counter rotating masses. The computation of the propulsion efficiency is based on a suitable physical mathematical model. Correlations between numerical experiments on models and possible full scale application are discussed. Some remarks in relation to practical applications and critical issues of the propulsive solution are illustrated. The results have been obtained with reference to a CAD model of a real boat already manufactured whose length is approximately equal to 13 m.