• Journal of Plant Biology
• /
• v.36 no.4
• /
• pp.337-343
• /
• 1993

Tracheid structure of aerial system in five species of Ophioglossaceae and one species of Osmundaceae was examined with light and scanning electron microscopy. The species were Botrichium multifidum var. robustrum, B. ternatum, strictum, B. virginianum, Ophioglossum vulgatum, and Osmunda japonica. Three types of tracheids could be recognized by the pattern of secondary wall thickening; helical, irregular reticulate and circular bordered pitted tracheids. Among them, the appearance of circular bordered pitted tracheids supported that ophioglossaceous plants might have phylogenetic relationship with progymnosperm-seed plant line. Circular and elliptical bordered pits in shape were observed in five ophioglossaceous species; the former was subdivided into large and small types in size. In conclusion, three types of bordered pits were found: (1) large circular type- O. vulgatum, (2) small circular type- B. multifidum var. robustrum, B. ternatum and (3) elliptical type-B. strictum, B. virginianum. B. strictum and B. virginianum belong to subgenus Osmundopteris had the elliptical bordered pits. Therefore, this group might be interpreted as the most primitive in this family; however, such suggestion did subgenus Osmundopteris was classified into the most advanced group.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.1021-1025
• /
• 2002

There have been many researches performed on the formability of axisymmetric or rectangular cup shapes in the deep drawing processes. But non-axisymmetric deep drawing processes rely upon empirical knowledge of experts in most cases. Especially, there have been few researches for multi-stage elliptical deep drawing processes. In this study, formability and thickness distributions of elliptical yoke products were predicted by using finite element analysis. The results of the analysis were compared with those of experiments for validity.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.3
• /
• pp.258-263
• /
• 2011

The direction of the cutting tool plays a critical role in elliptical vibration cutting(EVC) where the cutting tool cuts workpiece in a trochoidal motion. In this study, EVC cutting device was developed using two parallel piezoelectric materials and it was observed that the rotation direction of the tool reverses as the EVC device undergoes resonance at which either flexural(cutting direction) or longitudinal( thrust direction) mode shapes occurs. To analytically explain reversal of the rotation direction, kinematic motion analysis of the tool was modified to incorporate amplification of the vibration amplitude and phase introduced by resonance. It successfully demonstrated, through Matlab simulation, reversal of the rotation direction of the cutting tool as the excitation frequency increases beyond resonance frequencies at which either flexural or longitudinal vibration occurs.

• Steel and Composite Structures
• /
• v.29 no.1
• /
• pp.39-51
• /
• 2018

Position of a circular or elliptical cutout within an orthotropic plate has great influence on its buckling behavior. This paper aims at finding the optimal position (both location and orientation) of a single circular/elliptical cutout, within an orthotropic rectangular plate, that maximizes the critical buckling load. We consider linear buckling of simply supported orthotropic plates under uniaxial edge loads. To obtain the optimal positions of the cutouts, we have employed a MATLAB optimization routine coupled with buckling computation in ANSYS. Our results show that the position of the cutout that maximizes the buckling load has great dependence on the material properties, laminate configurations, and the geometrical parameters of the plate. These optimal results, for a number of plate geometries and cutout sizes, are reported in this paper. These results will be useful in the design of perforated orthotropic plates against buckling failure.

• Journal of Astronomy and Space Sciences
• /
• v.15 no.1
• /
• pp.49-52
• /
• 1998

We show quantitatively whether giant elliptical galaxies would be visible at for UV wavelenghts if they were placed at moderate red shift of 0.4-0.5. On the basis of simple cosmological tests, we conclude that giant elliptical galaxies can be detectable up to the red shift of 0.4-0.5 in the proposed GALEX(Galaxy Evolution Explorer) Deep Imaging Survey. We also show that obtaining UV color index such as $m_{1550}$ - V from upcoming GALEX and SDSS (Sloan Digital Sky Survey) observations should be feasible.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.53 no.3
• /
• pp.123-127
• /
• 2004

Mode conversion type ultrasonic rotary motor using bolt tightened Langevin type vibrator was studied. Driving frequency of the motor, displacements and elliptical trajectories at tip of the coupler were simulated by finite element analysis program (ANSYS). Speed and torque of the fabricated motor were measured as functions of input voltage and load. As results, from FEA the driving frequency of 40.8[kHz] and useful elliptical trajectories were found. Fabricated motor rotated clockwise at frequency of 38.2[kHz]. Speed and torque of the motor were increased when the input voltage was increased. Maximum speed, torque and efficiency were 75[rpm], 0.14[Nm] and 6.28[％], respectively.

• Tribology and Lubricants
• /
• v.12 no.3
• /
• pp.115-122
• /
• 1996

In this paper, a finite difference method and the Newton-Raphson method are used to evaluate the Hamrock and Dowson's EHL film thickness formulas in elliptical contact problems. The minimum and central film thicknesses are compared with the Hamrock and Dowson's numerical results for various dimensionless parameters and with their film thickness formulas. The results of present analysis are more accurate and physically reasonable. The minimum film thickness formula is similar with the Hamrock and Dowson's results, however, the central film thickness formula shows large differences. Therefore, the Hamrock and Dowson's central film thickness formula should be replaced by following equation. $H_{c} = 4.88U^{0.68}G^{0.44}W^{0.096}(1-0.58e^{-0.60k})$ More accurate film thickness formula for general elliptical contact problems can be expected using present numerical methods and further research should be required.

• Transactions of Materials Processing
• /
• v.10 no.3
• /
• pp.235-245
• /
• 2001

Deep drawing process, one of sheet metal forming methods, is very useful in the industrial field because of its efficiency The deep drawing is affected by many process variables, such as blank shapes, shape radii of the punch and die, formability of materials and so on. Especially, blank shape is very important formability factor. In this study, in order to investigate the effects of blank shape, we suggested three kinds of blank shapes and examined friction test about three conditions. We measured punch load distribution according to punch stroke under the conditions of each punch and die shape radii and observed punch load of elliptical cup forming.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.05b
• /
• pp.61-64
• /
• 2000

An ultrasonic linear motor was composed of a slider and a stator vibrator including piezoelectric material and elastic material. The ultrasonic linear motors mainly consist of an ultrasonic oscillator which generates elliptical oscillations. Elliptical oscillations are generated by synthesizing two degenerated modes. The design of a stator for an ultrasonic linear motor was optimized with respect to vibration mode and direction of vibratory displacement by employing the finite element method. Applying multilayer piezoelectric ceramics. we found larger elliptical oscillations. The motors were designed by varying the width of stator vibrator and the thickness. the length and the position of multilayer piezoelectric ceramics.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1252-1255
• /
• 2002

In this paper, face recognition algorithm, by using skin color information of HSI color coordinate collected from face images, elliptical mask, fratures of face including eyes, nose and mouth, and geometrical feature vectors of face and facial angles, is proposed. The proposed algorithm improved face region extraction efficacy by using HSI information relatively similar to human's visual system along with color tone information about skin colors of face, elliptical mask and intensity information. Moreover, it improved face recognition efficacy with using feature information of eyes, nose and mouth, and Θ1(ACRED), Θ2(AMRED) and Θ 3(ANRED), which are geometrical face angles of face. In the proposed algorithm, it enables exact face reading by using color tone information, elliptical mask, brightness information and structural characteristic angle together, not like using only brightness information in existing algorithm. Moreover, it uses structural related value of characteristics and certain vectors together for the recognition method.