• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.1
• /
• pp.16-24
• /
• 2021

Solar array simulator (SAS) is essential equipment in testing and evaluating the power processing performance of a power conditioning system. However, the nonlinearity in the current(I)-voltage(V) characteristic makes the control loop design of SAS a challenging task. Conventionally, only the inner loop is usually considered in the control design approach. However, this study proves that the reference generation loop also interacts with the inner loop and plays a key role in the overall performance of the SAS. In this paper, the performance of voltage-mode control and impedance control, which are two of the most popular architectures for the SAS system, are reviewed and compared by multi-loop analysis.

• Science of Emotion and Sensibility
• /
• v.20 no.1
• /
• pp.75-82
• /
• 2017

We propose a novel method for modeling emotional dimensions using expansion of Russell's (1980) emotional dimensions (Circumplex Model). The Circumplex Model represents emotional words in two axes (Arousal, Valence). However, other researchers have insisted that location of word in Russell's model which is expressed by single point could not represent exact position. Consequently, it is difficult to apply this model in engineering fields (such as Science of Emotion & Sensibility, Human-Computer-Interaction, Ergonomics, etc.). Therefore, we propose a new modeling method which expresses emotional word not as a single point but as a region. We conducted survey to obtain actual data and derived equations using ellipse formula to represent emotional region. Furthermore, we applied ANEW and IAPS which are commonly used in many studies to our emotional model using pattern recognition algorithm. Using our method, we could solve problems with Russell's model and our model is easily applicable to the field of engineering.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.5
• /
• pp.661-671
• /
• 1998

It is unavoidable that the fuel spray impinges on the wall of piston cavity in a compact high-pressure D.I. diesel engine. Therefore the characteristics of impinging spray are the very significant information on the consideration and the simulation of its combustion processes including the formation mechanism of exhaust emission and the design of the combustion chamber. In this paper, the numerical simulation was performed to study the characteristics of impinging spray. The spray-wall impingement model used is Watkins and Park's model. Calculation parameters are the inclination angles and the ambient pressures. As the inclination angle increases, the impinging spray develops mainly to the direction of the downstream and scarcely flows to that of the upstream. The shape on the wall of the impinging spray is the circle in the case of the normal impingement, while it is the ellipse in that of the oblique impingement. As the ambient pressure increases, the growth of impinging spray on the wall in the radial direction decreases owing to the increase in the resistance of the ambient.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.7
• /
• pp.789-795
• /
• 2011

In elliptical vibration cutting (EVC), cutting performance is largely affected by the shape of an elliptical path of the cutting tool. In this study, two parallel piezoelectric actuators were used to make an elliptical vibration cutting device. When harmonic voltages of $90^{\circ}$ out-of-phase are supplied to the EVC device, creation of an ideal elliptical trajectory whose major and minor axes are parallel to the cutting and thrust directions is anticipated from a kinematic analysis of the EVC device, however, the paths we experimentally observed showed significant distortions in its shape ranging from skew to excessive elongation of the major axis of the ellipse. To compensate distortions, an analytical model describing the elliptical path of the cutting tool was developed and verified with experimental results, and based on the analytical model, the distorted elliptical paths created at 100 Hz, 1 kHz, and 16 kHz were corrected for skew and elongation.

• Journal of the Semiconductor & Display Technology
• /
• v.4 no.1 s.10
• /
• pp.61-64
• /
• 2005

This study presents a new algorithm to detect the facial feature in a color image entered from the mobile device with complex backgrounds and undefined distance between camera's location and the face. Since skin color model with Hough transformation spent approximately 90$\%$ of running time to extract the fitting ellipse for detection of the facial feature, we have changed the approach to the simple geometric vector operation, called a TS(Triangle-Square) transformation. As the experimental results, this gives benefit of reduced run time. We have similar ratio of face detection to other methods with fast speed enough to be used on real-time identification system in mobile environments.

• The KSFM Journal of Fluid Machinery
• /
• v.13 no.6
• /
• pp.42-50
• /
• 2010

The present analysis deals with a numerical procedure for optimizing the shape of elliptical dimples in a cooling channel. The three-dimensional Reynolds-averaged Navier-Stokes (RANS) analysis is employed in conjunction with the SST model for predictions of the turbulent flow and the heat transfer. Three non-dimensional geometric design variables, such as the ellipse dimple diameter ratio, ratio of the dimple depth to the average diameter, and ratio of the distance between dimples to the pitch are considered in the optimization. Twenty-one experimental points within design space are selected by Latin Hypercube Sampling. Each objective function values at these points are evaluated by RANS analysis and producing optimal point using surrogate model. The linear combination of heat transfer coefficient and friction loss related terms with a weighting factor is defined as the objective function. The results show that the optimized elliptical dimple shape improves considerably the heat transfer performance than the circular dimple shape.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.51 no.3
• /
• pp.71-78
• /
• 2009

Pipe section of bending part at the arch type pipe-house showed an ellipse with oblateness of 0.076 on the average. Flexural rigidity of bending part decreased by average 6.3% than that of an original round shape section. The deflection of arch type pipe-house measured by model experiments showed much bigger than the result of structural analysis. In case of arch type pipe-house, we supposed that the decrease of flexural rigidity for the bending part of pipes had an effect on deflection of roof under the working load. This effect should be considered in the structural analysis. Bending resistance of gable type pipe-house used a prefabricated connector which developed in this study showed about $1.5{\sim}1.8$ times stronger than that of the existing arch type or gable type processed bending. Therefore, we supposed that the gable-roofed prefabricated pipe-house is safer than arch type or bent gable type in case of heavy snowfall. According to house scales and section properties of steel pipe in use, safe snow depths and rafter intervals were presented for design of gable-roofed prefabricated pipe-house. Their standards were established in the range of the durable models recommended by RDA, and the comparative examinations were conducted by means of structural analysis. It was evaluated that the developed greenhouse model had a high applicability in the field.

• Journal of Welding and Joining
• /
• v.27 no.4
• /
• pp.54-59
• /
• 2009

In the process to manufacture for metallic structures, control of welding deformation is one of an important problems connected with reliability of the manufactured structures so that welding deformation should be measured and controlled with quickly and actively. Also, welding parameters which have as lot of effects on welding deformation such as arc voltage, welding current and welding speed can also be controlled. The objectives for this study were to develop a simple 2-D FEM to calculate not only the transient thermal histories but also the sizes of fusion and heat-affected zone (HAZ) in multi pass arc welds including the butt and fillet weld type with dissimilar thickness, and to concentrate on a developed model for the finding the parameters of Godak's moving heat source model based on a GA. The developed model includes a GA program using MATLB and GA toolbox, and a batch mode thermal model using ANSYS software. Not only the thermal model was verified by comparison with Goldak's work but also the developed model was validated with molten zone section experimental data.

• Journal of KIISE:Information Networking
• /
• v.29 no.1
• /
• pp.97-107
• /
• 2002

In general, under interactive broadcasting environment, user finds additional service using top-down menu. However, user can't know that additional service provides information until retrieval has finished and top-down menu requires multi-level retrieval. This paper proposes the new method for additional service providing not using top-down menu but using object selection. For the purpose of this method, the movie of a MPEG should be synchronized with the object information(position, size, shape) and object tracking technique is required. Synchronization technique uses the Directshow provided by the Microsoft. Object tracking techniques use a motion-based tracking and a model-based tracking together. We divide object into two parts. One is face and the other is substance. Face tracking uses model-based tracking and Substance uses motion-based tracking base on the block matching algorithm. To improve precise tracking, motion-based tracking apply the temporal prediction search algorithm and model-based tracking apply the face model which merge ellipse model and color model.

• Journal of Astronomy and Space Sciences
• /
• v.25 no.4
• /
• pp.491-504
• /
• 2008

CSSA (Coarse Sun Sensor Assembly) is the essential sensor for satellite attitude control. CSSA measures the direction of the sun's rays and determines whether the satellite is in the ellipse. The paper shows the development process and test results of Path-finder & Qualified Model CSSA as the preceding development in order to develop the CSSA for low earth orbit satellite. We needs the definite and precision procedure and lots of experience. This paper shows that we can improve those through the development of Path-finder and Qualified Model CSSA. Therefore, we can obtain the results to meet the functional requirement.