• Journal of Bio-Environment Control
• /
• v.14 no.3
• /
• pp.218-231
• /
• 2005

This paper reviews the engineering approach needed to support humans during their long-term missions in space. This approach includes closed plant production systems under microgravity or low pressure, mass recycling, air revitalization, water purification, waste management, elimination of trace contaminants, lighting, and nutrient delivery systems in controlled ecological life support system (CELSS). Requirements of crops f3r space use are high production, edibility, digestibility, many culinary uses, capability of automation, short stems, and high transpiration. Low pressure on Mars is considered to be a major obstacle for the design of greenhouses fer crop production. However interest in Mars inflatable greenhouse applicable to planetary surface has increased. Structure, internal pressure, material, method of lighting, and shielding are principal design parameters for the inflatable greenhouse. The inflatable greenhouse operating at low pressure can reduce the structural mass and atmosphere leakage rate. Plants growing at reduced pressure show an increasing transpiration rates and a high water loss. Vapor pressure increases as moisture is added to the air through transpiration or evaporation from leaks in the hydroponic system. Fluctuations in vapor pressure will significantly influence total pressure in a closed system. Thus hydroponic systems should be as tight as possible to reduce the quantity of water that evaporates from leaks. And the environmental control system to maintain high relative humidity at low pressure should be developed. The essence of technologies associated with CELSS can support human lift even at extremely harsh conditions such as in deserts, polar regions, and under the ocean on Earth as well as in space.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.11_12
• /
• pp.629-638
• /
• 2005

In the System on a Chip design, the on chip bus is one of the critical factors that decides the overall system performance. Especially, in the case or reusing the IPs such as processors, DSPs and multimedia IPs that requires higher bandwidth, the bandwidth problems of on chip bus are getting more serious. Recently ARM proposes the Multi-Layer AHB BusMatrix that is a highly efficient on chip bus to solve the bandwidth problems. The Multi-Layer AHB BusMatrix allows parallel access paths between multiple masters and slaves in a system. This is achieved by using a more complex interconnection matrix and gives the benefit of increased overall bus bandwidth, and a more flexible system architecture. However, there is one clock cycle delay for each master in existing Multi-Layer AHB BusMatrix whenever the master starts new transactions or changes the slave layers because of the Input Stage and arbitration logic realized with Moore type. In this paper, we improved the existing Multi-Layer AHB BusMatrix architecture to solve the one clock cycle delay problems and to reduce the area overhead of the Input Stage. With the elimination of the Input Stage and some restrictions on the arbitration scheme, we tan take away the one clock cycle delay and reduce the area overhead. Experimental results show that the end time of total bus transaction and the average latency time of improved Multi-Layer AHB BusMatrix are improved by $20\%\;and\;24\%$ respectively. in ease of executing a number of transactions by 4-beat incrementing burst type. Besides the total area and the clock period are reduced by $22\%\;and\;29\%$ respectively, compared with existing Multi-layer AHB BusMatrix.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.4
• /
• pp.460-465
• /
• 2007

In this study, the removal characteristic of ammonia nitrogen and behavior of nitrogen was investigated using Leclercia adecarboxylata, which was derived from the culture contaminated by ammonia nitrogen of high concentration. The method of ammonia nitrogen removal was not biological nitrification and denitrification but elimination of nutrient salt with internal synthesis of microorganisms which use ammonia nitrogen as substrate. L. adecarboxylata(one of ammonia synthesis microorganisms) was highly activated and showed the most high removal efficiency in free salt condition but the removal efficiency decreased badly in salt concentration of more than 4%. About 80 mg/L of $NH_3-N$ was mostly removed within 20 hours and 500 mg/L of $NH_3-N$ showed less then removal efficiency of 50% because carbon source was not enough. However, ammonium nitrogen concentration was decreased again when the carbon source was inserted additionally thus, ammonium nitrogen removal efficiency by L. adecarboxylata, was related to amount of carbon source. pH decreased from 8.0 to 6.36 according to growth of L. adecarboxylata. Concentration of nitrite nitrogen and nitrate nitrogen did not increase and TKN concentration showed no variation while ammonia nitrogen was removed by L. adecarboxylata. In addition to, when content of protein in organic nitrogen was measured, protein was not detected at the beginning of microorganism synthesis but protein of 193.1 mg/L was detected after 48 hours. Hence, ammonium nitrogen was not decomposed as nitrate nitrogen and nitrite nitrogen but synthesized by L. adecarboxylata, which has excellent ability of nitrogen synthesis and can threat ammonia nitrogen of high concentration in wastewater.

• Journal of fish pathology
• /
• v.25 no.2
• /
• pp.95-101
• /
• 2012

The residue levels of sulfadimethoxine (SDM) was studied after oral administration to cultured olive flounder, Paralichthys olivaceus at $20{\pm}1.0^{\circ}C$. The concentrations of SDM in the plasma and liver were determined by HPLC-UV detector after a single dosage of 400 mg/kg body weight. The average recoveries of SDM in spiked samples between 2~50 ppm were 92.24~93.62% for plasma and 88.34~91.90% for liver. Limit of detection for SDM was 0.05 ppm by using this method. Samples were taken at 1 h, 6 h, 12 h, 24 h, 48 h, 72 h, 168 h, 240 h, 336 h and 480 h post-dose. The peak plasma and liver concentrations of SDM, which attained at 1 h post-dose, was $402.64{\pm}59.66{\mu}g/ml$ and $238.18{\pm}54{\mu}g/g$, respectively. Thereafter, it's elimination from both tissues was considerably faster following process of time. Their concentrations of SDM were not measurable at 480 h post-dose. Based on this results, dosage and withdrawal times for SDM could be used when it is prescribed with SDM in olive flounder.

• Applied Biological Chemistry
• /
• v.43 no.1
• /
• pp.52-56
• /
• 2000

The influence of the 2-(4-(6-chloro-2-benzoxazolyloxy)phenoxy)-N-phenyl- propionamide derivatives on the herbicide activities against rice plant with pre-emergence and post-emergence in down land were examined and the structure activity relationship (SAR) were analyzed by Free-Wilson and Hansch method. In pre-emergence, the SAR approach is shown that the optimal, $({\pi})_{opt}=0.91$, hydrophobicity with electron donating effect of the ortho substituted mono substituents and 2,3,4-substituted three substituents were found to be contribute the herbicidal activity. Whereas, in post-emergence, the optimal, ({\pi})_{opt}=0.50$, hydrophobicity with electron withdrawing effect of meta substituted mono subsituents and 2,3-substituted two substituents were found to be contribute the herbicide activity. The herbicide activities with post-emergence more increase than that of pre-emergence. It is assumed from the SAR equations that the 2-methyl-3-methoxy-4-cyano group substituent is selected as the most lowest herbicide activity against rice plant with post-emergence in green house. The hydrolysis reaction was proceeded through nucleophilic addition-elimination (Ad_{Nu-E})$ with the orbital control between LUMO of substrate and HOMO of water molecule. And molecular electrostatic potential (MEP) of none (H) substituent was discussed.

• Current Photovoltaic Research
• /
• v.5 no.3
• /
• pp.89-94
• /
• 2017

We have examined the issues on the measurement of bifacial photovoltaic(PV) devices that should be considered in order to ensure a measurement accuracy beyond a certain level and the comparability between the bifacial PV devices. Based on the results of various experiments and previous studies, solutions for these measurement issues are suggested. The most significant technical issues in the performance measurement of the bifacial PV devices are 1) elimination of the effect due to the light reflection on the sample holder surface and 2) the measurement of the expected power generation gain in outdoor operation. The effect due to the light reflection on the sample holder surface can be eliminated by using an anti-reflective sample holder. In case of a reflective sample holder, if the bifacial device have a linear characteristic with respect to the irradiance of incident light, it has been confirmed (through some previous studies and additional experiment) that exact measurement results can be obtained by the correction of the measurement data. In addition, it was also confirmed that the expected power generation gain in the outdoor operation can be obtained by three different methods along with the basic concepts of the bifaciality coefficient, the albedo, and the effective front irradiance.

• Journal of the Korean Society of Food Culture
• /
• v.18 no.2
• /
• pp.139-150
• /
• 2003

The objective of this study consists in promoting seafood consumption by increasing its intake opportunities for children through analysis of seafood using frequency in the elementary school lunch program. For that purpose, randomly sampled out from elementary schools through the county were 155 dietitians and 5th grade 3581 children, on whom a mail survey was conducted to analyse their seafood using frequency, and preference, and lunch menu by seasons. Results of this study are as follows : The seafood using frequency of the respondents represented the highest value in one or two times a week, while obstacles in seafood use presented high values in the safety of food by 71.6% and children preference by 68.4%. The seafood intake frequency of the respondents showed the highest value in three or four times a week by 34.5% and the places of seafood intake indicated the highest response in the home by 43.5% and then school lunch and dining out. The dietitians responded that children for the most part had not a preference for seafood, whereas the children pointed out average by 46.2%. As for reasons for avoidance of seafood, the dietitians expressed the highest response in it depends cooking methods by 45.8%, while the children because of its peculiar taste and smell by 42.1%. Their required improvement showed the highest response in the taste improvement by 51.8%. The children most preference for seafood that dietitians thought included fried Alaska pollack and shrimp cutlet, while dislikes braised mackerels and seasoned cold jelly fish. Cooking methods frequently used were represented in order of soup, hot soup, and stew, and the children's preferred cooking method was from fried food. Above results suggested that the intention to increase seafood using frequency is needed to at the time of planning the menus so that more seafood-providing opportunities can be given. The development of cooking methods is urgently needed that can change the taste or the smell of seafood, and concurrently with this conveniences be taken into account in eating such as elimination of bones, etc. as early as the states of purchase or checking of seafood. The reflection of the preferred cooking methods is thought to contribute to the enhancement of satisfaction with the seafood as well as to the reduction of food remnants. The recommendation of intake of low preference but nutritionally good seafood is required to be expanded in nutrition education.

• Korean Journal of Food Science and Technology
• /
• v.17 no.6
• /
• pp.500-505
• /
• 1985

A method to store concentrated milk in the liquid state at $-15^{\circ}C$ was developed, and quality changes during storage of milk were evaluated. Combined cryoprotectants (CCP) suitable for storing concentrated milk in the liquid state at $-15^{\circ}C$ were consisted of 17.74% sucrose, 8.87% glucose, 8.87% fructose, 2% glycerol, 0.25% sodium hexametaphosphate, 0.25% NaCl and 0.02% ascorbic acid. The amount of CCP to be added to concentrated milk to depress freezing point to $-15^{\circ}C$ was 38% by weight. Gelation due to protein denaturation was the most serious quality change during storage, which adversely affected appearance and utilization of the stored product. Gelation was observed after 3 weeks storage in the control, but it was not in milk with CCP throughout 18 weeks storage. Amount of protein precipitated increased in the control during storage, whereas there was no protein precipitated in milk with CCP. Surface color and peroxide value of the control and treatment did not change significantly during storage, and there were no marked differences between the control and treatment. These results indicated that quality of concentrated milk could be preserved, without gelation, by storing milk with CCP in the -liquid state at the frozen storage temperature. Besides, energy required for freezing preservation of milk could be significantly reduced by elimination of phase changes for freezing and thawing, and the stored product could be continuously processed for the final products without long waiting time for thawing.

• Restorative Dentistry and Endodontics
• /
• v.23 no.2
• /
• pp.656-669
• /
• 1998

Hydrogen peroxide at high concentration during walking bleaching may cause damage to the tooth structure and to the surrounding periodontal tissues and may develop external root resorption. Clinically, It is so important to find a method of prevention or minimization of these complications. The efficacy of various chamber-irrigating agents to eliminate residual hydrogen peroxide after walking bleaching was examined and compared with water rinse in this study. Extracted human 46 premolars without any cementoenamel junction defects were treated endodontically and based with IRM to 1 mm below CEJ and totally bleached 3 times for each tooth with 30% hydrogen peroxide and sodium perborate. Upon completion of the 3rd walking bleaching procedure, the cervical portion and pulp chamber of each group of teeth were irrigated with catalase, 70% ethylalcohol, acetone, and distilled water. And then, a radicular hydrogen peroxide penetration was measured with spectrophotometer immediately after each bleaching and following treatment with each chamber-irrigating agents, and the significance of their eliminating efficacy of residual hydrogen peroxide was analyzed by Kruskal-Wallis test. The results were obtained as follows. 1. Cervical root penetration of hydrogen peroxide was increased as the bleaching procedure was repeated(P<.01). 2. The most effective irrigant that removed residual hydrogen peroxide was the catalase, and the least effective one was water rinsing (P<.01).; there was no significant difference between the acetone and ethanol group. 3. The Irrigation with antioxidant enzyme or water-displacement solutions can eliminate residual oxygen radicals from the pulp chamber effectively after walking bleaching. So, these agents can reduce adverse effects such as cervical external resorption and periapical inflammation and prevent residual $O_2$ from impeding composite resin polymerization, thus increase the bonding strength of composite resin. This, in turn reduces microleakage and discoloration of the esthetic restoration, extending its service-life.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.7
• /
• pp.829-835
• /
• 2016

An excess in the nutrients such as nitrogen and phosphate leads to a phenomenon called eutrophication. In order to avoid this, numerous methods have been used to remove excess nutrients in the water. In this study, the use of a chemical method was assessed through the formation of magnesium ammonium phosphate. The difference in the removal efficiency of seawater and sea salt solution as primary sources of $Mg^{2+}$ ions and $Ca^{2+}$ ions for the formation of magnesium ammonium phosphate (MAP) and hydroxyapatite (HAP) respectively, were observed, taking into account the changes in pH and concentration. The results showed that seawater removed about 90 % phosphate and less than 50 % ammonia in sewage water condition, whereas the sea salt solution removed almost 90 % phosphate and 70 % ammonia in solution at pH 9 and 10 mM concentration of sea salt which further increases as the optimum ${Mg/PO_4}^{3-}$, ${NH_4}^+$ ratio reaches 2. The difference in the removal efficiency of seawater and sea salt was due to the fact that the set-ups were prepared in different conditions. This study suggests that both seawater and sea salt can be used to remove nutrients from the water. The relatively higher removal of phosphate can be explained by the formation of HAP from free $Ca^{2+}$ ions initially present in seawater and sea salt solution.