• Korean Journal of Remote Sensing
• /
• v.36 no.6_2
• /
• pp.1615-1627
• /
• 2020

The purpose of this study is to compare and analyze the performance of KOMPSAT-3 Digital Surface Model (DSM) made in overseas testbed area. To that end, we collected the KOMPSAT-3 in-track stereo image taken in San Francisco, the U.S. The stereo geometry elements (B/H, converse angle, etc.) of the stereo image taken were all found to be in the stable range. By applying precise sensor modeling using Ground Control Point (GCP) and DSM automatic generation technique, DSM with 1 m resolution was produced. Reference materials for evaluation and calibration are ground points with accuracy within 0.01 m from Compass Data Inc., 1 m resolution Elevation 1-DSM produced by Airbus. The precision sensor modeling accuracy of KOMPSAT-3 was within 0.5 m (RMSE) in horizontal and vertical directions. When the difference map was written between the generated DSM and the reference DSM, the mean and standard deviation were 0.61 m and 5.25 m respectively, but in some areas, they showed a large difference of more than 100 m. These areas appeared mainly in closed areas where high-rise buildings were concentrated. If KOMPSAT-3 tri-stereo images are used and various post-processing techniques are developed, it will be possible to produce DSM with more improved quality.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.997-999
• /
• 2003

The effects of JPEG2000 compression on automated DSM extraction by using the area-based matching are evaluated in this paper. The influences on DSM heights obtained via PCI Geomatics OrthoEngine module are investigated using a single stereo model of 1:5,000 scale aerial photography at image resolution of 20 ${\mu}$m. The experiment design of elevation errors are computed for a range of compression rates from 2:1 to about 100:1, and the DSM which generated from uncompressed image is used as ‘ground truth’ data for comparison. The experimental results show that the standard deviation ranged from 0.9m to 2.5m with the compression ratio from 2 to 100. It is also observed that there is no significant degradation on DSM accuracy up to the compression ratio of 33.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.321-321
• /
• 2022

유역 모델링은 유역에 강우의 유출 과정을 재현할 수 있는 과정이다. 과거 유역 모델링은 1차원 수준에서 유출과정을 모의하는데 그쳤으나, 기술이 발전함에 있어 입력하는 매개변수 수가 증가함에 따라 모의값의 신뢰성이 높아지고 있다. 본 연구에서는 다양한 매개변수 중 공간매개변수로써 널리 활용되고 있는 수치표고모델의 신뢰성과 범용성을 확인하고자 한다. 유역모델링 연구에 있어, 수치표고모델 정확성은 결과값의 신뢰성을 좌우하는 중요한 인자 중 하나이다. 수치표고모델이란 실제 지형이 나타내는 표고 정보를 수치화 하여 격자 안에 담은 형태의 파일로 대표적으로 DEM(Digital Elevation Models)과 DSM(Digital Surface Models)로 나눌 수 있다 DEM의 경우 해당 지형의 고도정보만을 담고있으며, DSM은 지표면 상의 나무, 건물 등 포함한 지표면의 고도를 담고 있다. 현재 NASA에서는 전 지구의 30m격자 크기로 SRTM-DSM을 제공하고 있으며, 우리나라 국토지리정보원에서도 90m 격자크기의 DEM을 제공하고 있다. 본 연구에서는 남한강 유역의 수치표고모델을 세 가지 Case로 나눠서 유출량 변화 검토를 진행하였다. 산지가 많은 남한강 유역의 10개의 소유역을 선정하였고, 다음과 같이 3개의 Case를 적용하였다. Case1, DEM 자료를 입력했을 경우, Case2, DSM 자료를 입력했을 경우, Case3 DSM+DEM 자료를 입력했을 경우, 각 Case에 대해 유출량을 산정하였고, 그 결과값을 분석하였다. 해당 유역에 세 가지 Case 모두 유출량의 변화량의 큰 차이를 보이지 않았으며, 공간매개변수 적용에 있어 타당성을 보였다. 따라서 본 연구는 인공위성을 통해 산출된 수치표고모델의 신뢰성을 확인 하였고, 활용가능성을 검토 하였다. 이에 따라 향후 연구에 수치표고모델 적용에 있어 미계측유역에도 활용가능한 연구로 기여할 수 있을 것으로 판단된다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.3
• /
• pp.217-223
• /
• 2014

With precise sensor position, attitude element, and imaging resolution, a simulated geospatial image can be generated. In this study, a satellite image is simulated using SPOT ortho-image and global elevation data, and the geometric similarity between original and simulated images is analyzed. Using a SPOT panchromatic image and high-density elevation data from a 1/5K digital topographic map data an ortho-image with 10-meter resolution was produced. The simulated image was then generated by exterior orientation parameters and global elevation data (SRTM1, GDEM2). Experimental results showed that (1) the agreement of the image simulation between pixel location from the SRTM1/GDEM2 and high-resolution elevation data is above 99% within one pixel; (2) SRTM1 is closer than GDEM2 to high-resolution elevation data; (3) the location of error occurrence is caused by the elevation difference of topographical objects between high-density elevation data generated from the Digital Terrain Model (DTM) and Digital Surface Model (DSM)-based global elevation data. Error occurrences were typically found at river boundaries, in urban areas, and in forests. In conclusion, this study showed that global elevation data are of practical use in generating simulated images with 10-meter resolution.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.3
• /
• pp.343-350
• /
• 2021

Unmanned aerial vehicles(UAV) photogrammetry provides a cost-effective option for collecting high-resolution 3D point clouds compared with UAV LiDAR and aerial photogrammetry. The main objectives of this study were to (1) validate the accuracy of 3D site model generated, and (2) determine the differences between Digital Elevation Model(DEM) and Digital Surface Model(DSM). In this study, DEM and DSM were shown to have varying degree of accuracy from observed data. The results indicated that the model predictions were considered tend to over- and under-estimated. The range of RMSE of DSM predicted was from 8.2 and 21.3 when compared with the observation. In addition, RMSE values were ranged from 10.2 and 25.8 to compare between DEM predicted and field data. The predict values resulting from the DSM were in agreement with the observed data compared to DEM calculation. In other words, it was determined that the DSM was a better suitable model than DEM. There is potential for enabling automated topography evaluation of the prior-harvest areas by using UAV technology.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.1 s.31
• /
• pp.19-25
• /
• 2005

Nowadays, it is possible to construct the DEMs of urban area effectively and economically by LiDAR system. But the data from LiDAR system has form of DSM which is included various objects as trees and buildings. So the preprocess is necessary to extract the DEMs from LiDAR DSMs for particular purpose as effects analysis of man-made objects for flood prediction. As this study is for extracting DEM from LiDAR DSM of urban area, we detected the edges of various objects using edge detecting algorithm of image process. And, we tried mean value filtering, median value filtering and minimum value filtering or detected edges instead of interpolation method which is used in the previous study and could be modified the source data. it could minimize the modification of source data, and the extracting process of DEMs from DSMs could be simplified and automated.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_3
• /
• pp.1013-1025
• /
• 2020

Unmanned Aerial Vehicle (UAV) platform is being widely used in disaster monitoring and smart city, having the advantage of being able to quickly acquire images in small areas at a low cost. Ground Control Points (GCPs) for positioning UAV images are essential to acquire cm-level accuracy when producing UAV-based orthoimages and Digital Surface Model (DSM). However, the on-site acquisition of GCPs takes considerable manpower and time. This research aims to provide an efficient and accurate way to replace the on-site GNSS surveying with three different sources of geospatial data. The three geospatial data used in this study is as follows; 1) 25 cm aerial orthoimages, and Digital Elevation Model (DEM) based on 1:1000 digital topographic map, 2) point cloud data acquired by Mobile Mapping System (MMS), and 3) hybrid point cloud data created by merging MMS data with UAV data. For each dataset a three-dimensional positional accuracy analysis of UAV-based orthoimage and DSM was performed by comparing differences in three-dimensional coordinates of independent check point obtained with those of the RTK-GNSS survey. The result shows the third case, in which MMS data and UAV data combined, to be the most accurate, showing an RMSE accuracy of 8.9 cm in horizontal and 24.5 cm in vertical, respectively. In addition, it has been shown that the distribution of geospatial GCPs has more sensitive on the vertical accuracy than on horizontal accuracy.

• New & Renewable Energy
• /
• v.9 no.2
• /
• pp.15-22
• /
• 2013

The solar energy are an infinite source of energy and a clean energy without secondary pollution. The global solar energy reaching the earth's surface can be calculated easily according to the change of latitude, altitude, and sloped surface depending on the amount of the actual state of the atmosphere and clouds. The high-resolution solar-meteorological resource map with 1km resolution was developed in 2011 based on GWNU (Gangneung-Wonju National University) solar radiation model with complex terrain. The very high resolution solar energy map can be calculated and analyzed in Seoul and Eunpyung with topological effect using by 1km solar-meteorological resources map, respectively. Seoul DEM (Digital Elevation Model) have 10m resolution from NGII (National Geographic Information Institute) and Eunpyeong new town DSM (Digital Surface Model) have 1m spatial resolution from lidar observations. The solar energy have small differences according to the local mountainous terrain and residential area. The maximum bias have up to 20% and 16% in Seoul and Eunpyung new town, respectively. Small differences are that limited area with resolutions. As a result, the solar energy can calculate precisely using solar radiation model with topological effect by digital elevation data and its results can be used as the basis data for the photovoltaic and solar thermal generation.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.11a
• /
• pp.335-339
• /
• 2005

Digital elevation models(DEM) were generated from SPOT-5 HRG supermode imagery through photogrammetric processing. The reference DEMs were obtained from digital topographic maps of 1/5000 scaleas for analyzing the accuracy of the generated DEMs. The DEMs extracted from HRG stereo image data were compared with digital topograpic map DEMs on several test sections. And digital surface models(DSM) and 3D building model was produced.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.1
• /
• pp.97-108
• /
• 2018

The purpose of this study is to propose the construction of a visibility analysis model, which is the basis of the analysis for landscape management on the heritage sites such as historic villages and scenic sites. Results of the visibility analysis using DEM and the visibility analysis of DSM based on 3D mapping data are compared as follows: Precision level of the extracted data was confirmed to be less than 6.5cm, based on RTK survey results produced by constructing orthoimage data and DSM from the digital data of 2cm-class GSD(Ground Sample Distance) obtained by using a small UAV(Unmanned Aerial Vehicle). As a result of comparing the visibility analysis data of Digital Surface Model (DSM) using a small UAV with Digital Elevation Model(DEM) applying the height of the building to the Digital Topographic Map, it was confirmed that more realistic visibility analysis can be accomplished by applying DSM, as the structures such as fences, trees, and houses are reflected in the topographic data. The visibility analysis model using the 3D mapping technique can efficiently obtain the constantly changing topographic information when needed, by immediately constructing the data by utilizing a small UAV. It seems to be possible to propose a reasonable analysis result for preservation management such as landscape evaluation of cultural property.