• 한국산업정보학회논문지
• /
• 제13권5호
• /
• pp.87-97
• /
• 2008

서비스 경쟁력의 중요성은 나날이 증대하고 있다. 국내 기업들은 서비스 경쟁력의 중요성을 인식하고 있지만, 그 대응은 미흡한 수준이다. 서비스는 생산과 소비가 동시에 발생하는 특징을 가지고 있어 그 자체가 프로세스라 할 수 있다. 본 연구에서는 서비스 경쟁력 향상을 위한 방안으로 프로세스 혁신을 활용한다. 서비스 프로세스 혁신을 상품의 특성(유형과 무형)과 혁신 대상(신 프로세스 설계와 기존 프로세스 개선)에 따라 4가지 타입으로 구분하며, 각 타입별로 다양한 사례를 제시하고 이를 토대로 구체적인 경쟁력 향상 방안을 제안한다.

• 한국농공학회논문집
• /
• 제57권6호
• /
• pp.1-7
• /
• 2015

Most of chloride diffusion models based on finite difference method (FDM) could not express the diffusion in horizontal direction at each elevation. To overcome these weakness, two dimensional chloride ion penetration model based on finite element method (FEM) to be able to combine various multi-physics simultaneously was suggested by introducing moving mesh technique. To avoid the generation of mesh being able to be distorted depending on the relative movement of water level to static concrete, a rectangular type of mesh was intentionally adopted and the total number of meshes was empirically selected. The simulated results showed that the contents of surface chloride decreased following to the increase of elevation in the top part of low sea level, whereas there were no changes in the bottom part of low level. In the DuraCrete model, the diffusion coefficient of splashed zone is generally smaller than submerged zone, whereas the trend of Life365 model is reverse. Therefore, it could be understood that the developed model using moving mesh technique effectively reflects $DuraCrete^{TM}$ model rather than $Life365^{TM}$ model. In the future, the model will be easily expanded to be combined with various multi-physics models considering water evaporation, heat of hydration, irradiation effect of sun and so on because it is based on FEM.

• 로봇학회논문지
• /
• 제16권2호
• /
• pp.94-102
• /
• 2021

This study addresses a method for 3D reconstruction using acoustic data with heterogeneous sonar devices: Forward-Looking Multibeam Sonar (FLMS) and Profiling Sonar (PS). The challenges in sonar image processing are perceptual ambiguity, the loss of elevation information, and low signal to noise ratio, which are caused by the ranging and intensity-based image generation mechanism of sonars. The conventional approaches utilize additional constraints such as Lambertian reflection and redundant data at various positions, but they are vulnerable to environmental conditions. Our approach is to use two sonars that have a complementary data type. Typically, the sonars provide reliable information in the horizontal but, the loss of elevation information degrades the quality of data in the vertical. To overcome the characteristic of sonar devices, we adopt the crossed installation in such a way that the PS is laid down on its side and mounted on the top of FLMS. From the installation, FLMS scans horizontal information and PS obtains a vertical profile of the front area of AUV. For the fusion of the two sonar data, we propose the probabilistic approach. A likelihood map using geometric constraints between two sonar devices is built and a monte-carlo experiment using a derived model is conducted to extract 3D points. To verify the proposed method, we conducted a simulation and field test. As a result, a consistent seabed map was obtained. This method can be utilized for 3D seabed mapping with an AUV.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2022년도 학술발표회
• /
• pp.156-156
• /
• 2022

Explicitly spatially distributed and reliable data on industrial water demand is very much important for both policy makers and researchers in order to carry a region-specific analysis of water resources management. However, such type of data remains scarce particularly in underdeveloped and developing countries. Current research is limited in using different spatially available socio-economic, climate data and geographical data from different sources in accordance to predict industrial water demand at finer resolution. This study proposes a random forest regression (RFR) model to predict the industrial water demand at 0.50× 0.50 spatial resolution by combining various features extracted from multiple data sources. The dataset used here include National Polar-orbiting Partnership (NPP)/Visible Infrared Imaging Radiometer Suite (VIIRS) night-time light (NTL), Global Power Plant database, AQUASTAT country-wise industrial water use data, Elevation data, Gross Domestic Product (GDP), Road density, Crop land, Population, Precipitation, Temperature, and Aridity. Compared with traditional regression algorithms, RF shows the advantages of high prediction accuracy, not requiring assumptions of a prior probability distribution, and the capacity to analyses variable importance. The final RF model was fitted using the parameter settings of ntree = 300 and mtry = 2. As a result, determinate coefficients value of 0.547 is achieved. The variable importance of the independent variables e.g. night light data, elevation data, GDP and population data used in the training purpose of RF model plays the major role in predicting the industrial water demand.

• 한국지형학회지
• /
• 제28권1호
• /
• pp.1-12
• /
• 2021

This study tried to reveal relative surface denudation resistance and ranking by geologic types in the Southern Korean Peninsula using an 1:250,000 digital geologic map and ASTER GDEM. Among rock types such as igneous, sedimentary and metamorphic rocks, metamorphic rock showed the greatest resistance to surface denudation. The most resistant rock to surface denudation by geologic periods (e.g., the Precambrian, Paleozoic, Mesozoic and Cenozoic) was found from the Precambrian. Among the major tectonic settings in the Southern Korean Peninsula such as the Gyeonggi massif, Okcheon belt, Yeongnam massif, Gyeongsang basin and Pohang basin, the Okcheon belt indicated the greatest resistance. The most and least resistant rocks from the representative nine rocks in the Southern Korean Peninsula were Paleozoic limestone, and Cretaceous sedimentary rock and Cenozoic sedimentary rock, respectively. This study suggests that Paleozoic limestone, Cretaceous volcanic rock, Paleozoic sedimentary rock and Precambrian gneiss can be regarded as hard rocks with high elevation, steep slope and complicated relief, while soft rocks with low elevation, gentle slope and simple relief are Jurassic granite, Cretaceous sedimentary rock and Cenozoic sedimentary rock.

• 대한건축학회논문집:계획계
• /
• 제35권2호
• /
• pp.43-52
• /
• 2019

The purpose of this study is to classify the building layout and plan types according to the urban location, use and function of civil and to analyze the characteristics by the type classified. After constructing a framework (Mathia type, Nagaya type, Detached House type) for analyzing Modern Private Housing Architecture in Gunsan, the research was conducted on 30 representative buildings, and a plot plan, a floor plan and elevation were created. After analyzing the relationship between the lot of land and the urban street, we classified the type of arrangement into Mathia type and Nagaya type which directly enter the building from the road, and derived the Detached House type which indirectly enters from the road. When we look at the use of the derived arrangement types, most of the Mathia type are commercial and residential buildings, and some of them are specially designed for commercial buildings. The Nagaya type appears in the form of commercial and residential house or residential private house, and the Detached House type is classified as residential style. As a relation with the urban street, the Mathia type and the Nagaya type are generally located on the main urban street, whereas the Detached House type is located on the small urban street. As a result of analyzing, the floor plan was changed according to the plot plan. The plan of the Mathia and Nagaya type are arranged to enter directly from the street, with commercial space being mainly located on the street, and the residential space being composed on the back or the second floor. the plan of the Detached House is a type that enters indirectly into the interior through a separate space (Courtyard), and forms an organic space between the residential interior and the front and rear yard. The purpose of this study is to investigate the Characteristics of a plot plan and a floor plan of Modern Private Housing Architecture in Gunsan by means of analysis considering the urban street, Uses of buildings, Construction method and the yard through actual measurement.

• 한국지리정보학회지
• /
• 제17권1호
• /
• pp.1-12
• /
• 2014

수관화는 대형산불의 주된 확산유형으로 빠른 확산속도와 높은 산불강도의 특성을 보이며 많은 피해를 입힌다. 이 연구에서는 수관화 피해를 사전에 예측하기 위해서 수관전소 피해를 입은 지역의 지형 임상 기상 특성을 분석하여 수관화확산확률식을 개발하였다. 영덕 울진 고령 예천에서 일어난 4개의 산불피해지를 대상으로 하였으며, 총 18개의 공간 변수를 구축한 뒤 기타연소지에 대한 수관전소지의 비를 이용하여 각 변수별 구간 가중치를 구하고 로지스틱 회귀모형을 이용하여 변수와의 상관계수를 산출하였다. 그 결과, 수관화확산확률은 임상이 침엽수림일 때, 250m 이상에서 고도가 높아질수록, 기복이 심할수록, 사면향은 남서 또는 남동사면일 경우, 능선일수록, 일사량이 많아질수록 높게 나타났다. 고도와 경사가 낮은 곳에서는 교란현상이 많이 나타나 일정한 패턴을 보이지 않았다. 이 확률식을 통해 수관화 위험지를 사전에 분석할 수 있고, 산불방지 숲가꾸기 지역 선정 및 진화 우선 지역 선정 등에 효과적으로 활용할 수 있을 것이다.

• 한국산학기술학회논문지
• /
• 제13권10호
• /
• pp.4733-4739
• /
• 2012

본 논문에서는 태양과 태양전지 모듈이 법선을 이루도록 기존에 태양의 방위각 및 고도각을 제어하는 양축 추적시스템에 2개의 센서를 사용하였던 Double-sensor방식에서 1개의 센서로 방위각 및 고도각을 제어할 수 있는 One-sensor방식의 양축 추적시스템을 제안하였다. 그리고 제안한 추적시스템을 제작하여 시스템의 실제 운전을 실행하였다. 제안한 추적시스템은 1개의 센서를 이용하여 태양이 항상 법선을 이루면서 태양전지 모듈에 입사되게 제어하기 위해 방위각과 고도각을 제어하는 양축 추적시스템이다. 실험결과 가장 효율적인 운전과 불필요한 구동부의 동작을 방지하여 전력소모를 감소할 수 있었으며 고정식에 비해 본 논문에서 제안한 One-sensor방식의 양축 추적시스템이 약 23[%]의 발전효율이 증가함을 확인 할 수 있었다. 태양을 추적하여 더 많은 햇빛을 받게 하여 태양전지의 효율을 높이기 위하여 행해진 추적장치는 대형 방식에 많은 연구가 진행되어 왔다. 따라서 본 논문의 태양위치추적의 모니터링 시스템을 구축하여 지속적인 발전효율에 대한 실용화 연구를 통해 태양광발전시스템 보급에 큰 역할을 할 것이라 기대된다.

• 환경영향평가
• /
• 제2권1호
• /
• pp.39-55
• /
• 1993

The importance of urban and regional natural park increases because of the needs for preserving the natural resources and providing with natural recreation space in nature. This planning of natural park management should be established based on the research of the various natural resources in the park. But for the lack of effective data synthesizing methods and concepts, only some restricted factors for zoning plan are considered even though GIS computer system for large complex simulation is used. Therefore, in this study three ecological zoning models such as Basic Factor Model (BFM), Visual Landscape Model (VLM) and Comprehensive Ecological Model (CEM) are proposed and applied to Byounsan Peninsula Nature Park(BPNP) for comparison with the current natural park zoning. The BFM has three components -elevation, slope and vegetation. The VLM has applied with six components -elevation, slope, vegetation, road type, and the visual distance. Finally the CEM's modelling factors have included all of BFM, VLM components are added with the land use type, nature and historic resource factors. The zoning concept of BPNP was based on "Minimization" focused on the specific factors. But introduced modelling concept is "Optimization" based on the total ecological environment. So the result of the modelling has larger area for preservation and development zoning compared with the current zoning whose characteristics are ambiguous which allows the environmental destruction. The future study issues will be the determination of the weighting factor, component reconsideration based on the ground truth data and the agriculture residential area zoning.

• 대한원격탐사학회지
• /
• 제15권1호
• /
• pp.31-38
• /
• 1999

본 논문에서는 pushbroom 형태의 선형 CCD 카메라로부터 촬영한 고해상도 위성 영상의 정사투영 알고리즘을 소개한다. 정사투영은 토기기하학적 보정, 정밀기하학적 보정에 이은 위성 영상 전처리의 최종단계이며 정사투영법을 사용하는 정밀 지형도 제작을 위해 반드시 필요하다. 정사투영 영상을 생성하기 위해 카메라 모델은 기존에 본 학회지에 소개된 바 있는 카메라 모델 및 reampling 알고리즘(신동석, 이영란, 1997), 정밀카메라모델 결정 알고리즘(신동석 외, 1998)을 사용하였고 지형의 표고 데이터를 이용하여 알고리즘을 개발하였다. 여러 가지 시험 결과에서도 볼 수 있듯이 개발된 정사투영 알고리즘은 투시법(perspective projection)을 사용한 영상에서 지표의 고도에 따른 시차를 정확히 제거한다. 그리고 정사투영의 최종 절대 정확도는 정밀 카메라 모델을 생성하기 뒤해 사용된 GCP(Ground Control Point)의 정확도 및 사용되는 수치표고 데이터의 정확도에 의존함에도 유의해야한다.