• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.5
• /
• pp.87-97
• /
• 2008

Importance of service competitive power is greatly increasing. Domestic enterprises are recognizing the importance of service competitive power, but the correspondence is insufficient level. Because service has the characteristic that production and consumption synchronizes, it can be considered as process. In this study, we utilize the process reform by plan for service competitive power elevation. We divide service process reform by four types based upon special quality of goods(form and formlessness) and reform target (new process design and existing process improvement), and present various examples by each type. On the this basis, we suggest the specific elevation plan of competitive power.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.6
• /
• pp.1-7
• /
• 2015

Most of chloride diffusion models based on finite difference method (FDM) could not express the diffusion in horizontal direction at each elevation. To overcome these weakness, two dimensional chloride ion penetration model based on finite element method (FEM) to be able to combine various multi-physics simultaneously was suggested by introducing moving mesh technique. To avoid the generation of mesh being able to be distorted depending on the relative movement of water level to static concrete, a rectangular type of mesh was intentionally adopted and the total number of meshes was empirically selected. The simulated results showed that the contents of surface chloride decreased following to the increase of elevation in the top part of low sea level, whereas there were no changes in the bottom part of low level. In the DuraCrete model, the diffusion coefficient of splashed zone is generally smaller than submerged zone, whereas the trend of Life365 model is reverse. Therefore, it could be understood that the developed model using moving mesh technique effectively reflects $DuraCrete^{TM}$ model rather than $Life365^{TM}$ model. In the future, the model will be easily expanded to be combined with various multi-physics models considering water evaporation, heat of hydration, irradiation effect of sun and so on because it is based on FEM.

• The Journal of Korea Robotics Society
• /
• v.16 no.2
• /
• pp.94-102
• /
• 2021

This study addresses a method for 3D reconstruction using acoustic data with heterogeneous sonar devices: Forward-Looking Multibeam Sonar (FLMS) and Profiling Sonar (PS). The challenges in sonar image processing are perceptual ambiguity, the loss of elevation information, and low signal to noise ratio, which are caused by the ranging and intensity-based image generation mechanism of sonars. The conventional approaches utilize additional constraints such as Lambertian reflection and redundant data at various positions, but they are vulnerable to environmental conditions. Our approach is to use two sonars that have a complementary data type. Typically, the sonars provide reliable information in the horizontal but, the loss of elevation information degrades the quality of data in the vertical. To overcome the characteristic of sonar devices, we adopt the crossed installation in such a way that the PS is laid down on its side and mounted on the top of FLMS. From the installation, FLMS scans horizontal information and PS obtains a vertical profile of the front area of AUV. For the fusion of the two sonar data, we propose the probabilistic approach. A likelihood map using geometric constraints between two sonar devices is built and a monte-carlo experiment using a derived model is conducted to extract 3D points. To verify the proposed method, we conducted a simulation and field test. As a result, a consistent seabed map was obtained. This method can be utilized for 3D seabed mapping with an AUV.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.156-156
• /
• 2022

Explicitly spatially distributed and reliable data on industrial water demand is very much important for both policy makers and researchers in order to carry a region-specific analysis of water resources management. However, such type of data remains scarce particularly in underdeveloped and developing countries. Current research is limited in using different spatially available socio-economic, climate data and geographical data from different sources in accordance to predict industrial water demand at finer resolution. This study proposes a random forest regression (RFR) model to predict the industrial water demand at 0.50× 0.50 spatial resolution by combining various features extracted from multiple data sources. The dataset used here include National Polar-orbiting Partnership (NPP)/Visible Infrared Imaging Radiometer Suite (VIIRS) night-time light (NTL), Global Power Plant database, AQUASTAT country-wise industrial water use data, Elevation data, Gross Domestic Product (GDP), Road density, Crop land, Population, Precipitation, Temperature, and Aridity. Compared with traditional regression algorithms, RF shows the advantages of high prediction accuracy, not requiring assumptions of a prior probability distribution, and the capacity to analyses variable importance. The final RF model was fitted using the parameter settings of ntree = 300 and mtry = 2. As a result, determinate coefficients value of 0.547 is achieved. The variable importance of the independent variables e.g. night light data, elevation data, GDP and population data used in the training purpose of RF model plays the major role in predicting the industrial water demand.

• Journal of The Geomorphological Association of Korea
• /
• v.28 no.1
• /
• pp.1-12
• /
• 2021

This study tried to reveal relative surface denudation resistance and ranking by geologic types in the Southern Korean Peninsula using an 1:250,000 digital geologic map and ASTER GDEM. Among rock types such as igneous, sedimentary and metamorphic rocks, metamorphic rock showed the greatest resistance to surface denudation. The most resistant rock to surface denudation by geologic periods (e.g., the Precambrian, Paleozoic, Mesozoic and Cenozoic) was found from the Precambrian. Among the major tectonic settings in the Southern Korean Peninsula such as the Gyeonggi massif, Okcheon belt, Yeongnam massif, Gyeongsang basin and Pohang basin, the Okcheon belt indicated the greatest resistance. The most and least resistant rocks from the representative nine rocks in the Southern Korean Peninsula were Paleozoic limestone, and Cretaceous sedimentary rock and Cenozoic sedimentary rock, respectively. This study suggests that Paleozoic limestone, Cretaceous volcanic rock, Paleozoic sedimentary rock and Precambrian gneiss can be regarded as hard rocks with high elevation, steep slope and complicated relief, while soft rocks with low elevation, gentle slope and simple relief are Jurassic granite, Cretaceous sedimentary rock and Cenozoic sedimentary rock.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.2
• /
• pp.43-52
• /
• 2019

The purpose of this study is to classify the building layout and plan types according to the urban location, use and function of civil and to analyze the characteristics by the type classified. After constructing a framework (Mathia type, Nagaya type, Detached House type) for analyzing Modern Private Housing Architecture in Gunsan, the research was conducted on 30 representative buildings, and a plot plan, a floor plan and elevation were created. After analyzing the relationship between the lot of land and the urban street, we classified the type of arrangement into Mathia type and Nagaya type which directly enter the building from the road, and derived the Detached House type which indirectly enters from the road. When we look at the use of the derived arrangement types, most of the Mathia type are commercial and residential buildings, and some of them are specially designed for commercial buildings. The Nagaya type appears in the form of commercial and residential house or residential private house, and the Detached House type is classified as residential style. As a relation with the urban street, the Mathia type and the Nagaya type are generally located on the main urban street, whereas the Detached House type is located on the small urban street. As a result of analyzing, the floor plan was changed according to the plot plan. The plan of the Mathia and Nagaya type are arranged to enter directly from the street, with commercial space being mainly located on the street, and the residential space being composed on the back or the second floor. the plan of the Detached House is a type that enters indirectly into the interior through a separate space (Courtyard), and forms an organic space between the residential interior and the front and rear yard. The purpose of this study is to investigate the Characteristics of a plot plan and a floor plan of Modern Private Housing Architecture in Gunsan by means of analysis considering the urban street, Uses of buildings, Construction method and the yard through actual measurement.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.1
• /
• pp.1-12
• /
• 2014

Crown fire, the main propagation type of large forest fire, has caused extreme damage with the fast spread rate and the high flame intensity. In this paper, we developed the probability equation to predict the crown fires using the spatial features of topography, fuel and weather in damaged area by crown fire. Eighteen variables were collected and then classified by burn severity utilizing geographic information system and remote sensing. Crown fire ratio and logistic regression model were used to select related variables and to estimate the weights for the classes of each variables. As a results, elevation, forest type, elevation relief ratio, folded aspect, plan curvature and solar insolation were related to the crown fire propagation. The crown fire propagation probability equation may can be applied to the priority setting of fuel treatment and suppression resources allocation for forest fire.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4733-4739
• /
• 2012

While traditional two-axis tracking systems with double sensors had been using two sensors to control azimuth and elevation angle of the sun so that a solar cell module would make a normal line with the sun, this paper proposed a new two-axis system that can achieve the same performance with only one sensor in it. It is Two-axis tracking system that control azimuth and elevation to control to be reduced for solar cell module as proposed tracking system uses 1 sensors and the sun always forms normal. Two-axis tracking system of one sensor method that propose in paper that could reduce electric power consumption and sees than fixed type preventing action and the most efficient driving and needless drive could confirm that generation efficiency of about 23 [%] increases. To heighten efficiency of solar cell doing to receive more sunlights chasing the sun, done tracking device have proceeded a lot of studies in large size way. Therefore, is expected that will do big part in the sun tracking supply through utility study about persistent generation efficiency constructing monitoring system of the sun tracking of this paper.

• Journal of Environmental Impact Assessment
• /
• v.2 no.1
• /
• pp.39-55
• /
• 1993

The importance of urban and regional natural park increases because of the needs for preserving the natural resources and providing with natural recreation space in nature. This planning of natural park management should be established based on the research of the various natural resources in the park. But for the lack of effective data synthesizing methods and concepts, only some restricted factors for zoning plan are considered even though GIS computer system for large complex simulation is used. Therefore, in this study three ecological zoning models such as Basic Factor Model (BFM), Visual Landscape Model (VLM) and Comprehensive Ecological Model (CEM) are proposed and applied to Byounsan Peninsula Nature Park(BPNP) for comparison with the current natural park zoning. The BFM has three components -elevation, slope and vegetation. The VLM has applied with six components -elevation, slope, vegetation, road type, and the visual distance. Finally the CEM's modelling factors have included all of BFM, VLM components are added with the land use type, nature and historic resource factors. The zoning concept of BPNP was based on "Minimization" focused on the specific factors. But introduced modelling concept is "Optimization" based on the total ecological environment. So the result of the modelling has larger area for preservation and development zoning compared with the current zoning whose characteristics are ambiguous which allows the environmental destruction. The future study issues will be the determination of the weighting factor, component reconsideration based on the ground truth data and the agriculture residential area zoning.

• Korean Journal of Remote Sensing
• /
• v.15 no.1
• /
• pp.31-38
• /
• 1999

In this paper, we introduce an algorithm for the ortho-rectification of high resolution pushbroom-type satellite images. The generation of ortho-images in the ultimate level of the satellite image preprocessing which also includes systematic geocoding and precision geocoding. It is also essential for the mapping of satellite images because topotraphic maps are based on the orthographic projection. The newly developed ortho-image generation algorithm introduced in this paper is on the line of the algorithms previously developed (Shin and Lee, 1997; Shin e 1998). Various experimental results are shown in this paper. The results show that the algorithm completely eliminates the disparities in the perspectively viewed images which were caused by the terrain height. The absolute accuracy of the developed algorithm depends on the accuracy of the camera model and the digital elevation model used.